How to log into yota modem ip address. Setting up a Yota router: fine-tuning the Yota Wi-Fi router Yota Many New, Yota Share

The wireless provider Yota has come to us, in Saratov. The operator offers unlimited Internet access, and the terms of the tariffs are such that there is no limit at all, the tariffs differ only in access speed. In our area, currently, none of the competitors offers such conditions.
To access the Internet via a computer or laptop, Yota offers three models of modems, two of which have a wireless Wi-Fi module - Yota 4G LTE and Yota Many.
By the way, they work with any device that has a USB port due to the fact that they have their own operating system. That is, in fact, this is a small mobile router.

It can be used without connecting to a computer or laptop. That is, we simply plug it into the adapter (for example, a mobile phone charger of suitable current).

The only point is that you first need to configure WiFi on the Yota modem. This can be done through the device’s web interface, which is also called “Personal Account”, at: status.yota.ru. Enter it into the address bar of the browser and click the “OK” button.

If the browser complains with the error “Page not found” or “Cannot access the site,” then try entering the modem’s IP address in the address bar: 10.0.0.1 like this:

The default login is admin and password: admin. After authorization, you need to open the “Settings” menu item:

The default wireless SSID is YOTA. You can change it to your own option in the “Network name” line.
The security type is already set to the most reliable at the factory settings - WPA2.
In the “Password” field, enter your password for the Yota WiFi modem, which will be requested from clients when they try to connect to it.

On latest versions it became possible to install firmware maximum amount Wi-Fi network clients:

This is done simply by moving the slider left or right.
Save the device settings.
Profit! The mobile mini-router is ready for use.

Note: On some models of Internet modems, Yota encountered a different IP - 10.0.0.254 .

As you can see in the screenshot, there is no difference in the user interface itself.

What to do if your personal account is unavailable?!

Most likely the problem is with the IP address. The computer cannot receive it automatically and therefore Login to Yota settings for 10.0.0.1 is not available. The fix is ​​simple. Opening network Windows connections and we find there one of them through which a PC or laptop cannot enter the Iota settings. Right-click on the connection and select “Properties”. In the window that appears, double-click on the item “Internet Protocol IP version 4 (TCP/IPv4)” to get into its parameters:

Here you need to check the “Use the following IP” checkbox and enter the following parameters:

IP address - 10.0.0.2 Mask - 255.255.255.0 Gateway - 10.0.0.1 DNS server - 10.0.0.1

As an alternative DNS, you can use a public server from Yandex - 77.88.8.8 or Google - 8.8.8.8.
Click on the “OK” button to apply the settings and try to log in again Personal Area modem
If after this you cannot enter the Yota modem settings, try plugging it into another USB port on your computer.
Didn't that help either? Then it makes sense to try taking it to a service center and give it for testing.

Web interfaces of Megafon and Yota modems (status.yota.ru) to help owners of LTE modems. We describe to visitors of our resource all known interfaces - 10.0.0.1 status.yota.ru of Yota modems.

Please note that this IP is the default, but 192.168.0.0, 192.168.0.1, 192.168.1.1 or 172.16.0.0 are also possible

10.0.0.1 modem settings

As you know, many users often face the problem of debugging devices. This is the definition of serviceability, purpose, technical. characteristics or changing the built-in settings of iota modems installed by default.
1) There is a modem which appearance it is difficult to distinguish Yota One (wimax) from Yota LU 150-156 (LTE).

To do this, connect the modem to the USB port of the computer and type in the address bar of the browser - http://10.0.0.1/status

We get (approximately this) -

MAC=99:6C:8F:0B:6C:D8DeviceName=Yota One

InterfaceType=wimax

RfVersion=GDM7205R3

AsicVersion=GDM7205R3

FirmwareVersion=11.01.29

IsReadyForUpdate=0

UpdateState=NotStarted

WebGuiUrl=http://status.yota.ru

2) Suddenly there was a task - configuring a home network. We have to change the built-in IP addresses and to do this we select the desired one from three options.

3) If you need to update the firmware manually, there is an interface for this - http://10.0.0.1/manualupdate

Setting up a Yota router from 10.0.0.1

To set up your home network, you need to enter in the browser line exactly as shown in the picture below

After this, you are directly taken to the Personal Account of your router. The connection details will be displayed here −

• maximum speed
• current speed
• traffic (Received\Sent)
• signal quality
• IP address
• Cell ID, ID
• Version P.O

Simple problem solving

If you can’t log into the management page of your Yota device, then we will try to figure out what caused this.

First, check whether you made a mistake in typing the network address. We advise you to go through the ready-made samples highlighted at the beginning of the article.

Secondly, view your connections by going to Control Panel\Network and Internet\Network Connections (Windows 7) or by typing the command ncpa.cpl(by clicking on the Start icon in the lower left corner of the screen or by pressing the Win+R keys.

Having selected your network connection, click on its properties, selecting Internet Protocol version 4 (TCP/IPv4) and check that it is set to “Obtain DNS server address automatically.”

Attention is important. If after these manipulations the Network does not work, you should try to configure it manually. To do this, instead of automatically selecting Yota servers, you need to configure them yourself.

You will have to fill in the network connection data in the columns - IP address, Mask, Gateway and Primary server. To make this task easier, simply enter the data from the snapshot below.

Greetings! Today I would like to show you how to log into Yota devices. Devices from this provider are found more and more often in homes, so this wave has reached me. They have a lot of things for accessing the Internet - these are standard whistle modems with Wi-Fi and the ability to directly connect to a computer via USB, and these are full-fledged routers. But the mechanics of connecting to the settings are the same. Let's try.

Connection addresses

Try following one of the links above and your settings account should open. Before doing this, do not forget to physically connect the devices themselves - by connecting to USB, via Wi-Fi or via wire.

Settings or personal account?

At the addresses above you will be taken to your modem/router’s personal account. There you can do everything related to your home network and managing the Yota device - for example, changing the Wi-Fi password or renaming the network. These are the settings of the device itself.

Many people want to top up their balance. This is not done here, but in your personal account. We will talk about it a little below, you never know what you need, because... these are two completely different things.

Personal Area

Personal account address: https://my.yota.ru

This is where you manage your tariff - selecting the speed, topping up your account, getting statistics on Internet usage. And here's what's hidden inside:

I hope everything is clear with this. I propose now to consider the settings of the modem itself.

How to log into the Yota modem?

Both addresses are suitable for connecting - which one you choose depends only on your mood. To connect to the settings, simply enter them in your browser and go to this “site”. Another option to login is to simply follow the following links:

After opening, a page with information about the status of the Yota device should immediately open:

Here is just the basics - connection status, current speeds, network parameters. To enter the settings, click on the “Device Settings” button, where the necessary settings for your Wi-Fi network will be available:

There are also advanced settings, for this you need to go to the address http://status.yota.ru/advanced.

Video on the topic

Incorrect addresses

Check that you have not mixed up the address. These addresses are not suitable:

10.10.10.0
10.10.1.1
10.10.0.1
10.0.1.1

Correct address:

Can't access status.yota.ru?

This also happens, first try 10.0.0.1 from the links above. If it suits them, great. If it doesn't work, it's more likely a network connection issue.

Possible instructions to solve this problem:

1. In the case of a USB modem, disconnect it from the computer or outlet. In the case of a router (Yota Many), turn the power off/on using the button or from the network.
2. Another problem with the modem is lack of power. Try changing the USB port, changing the power supply, eliminating any extension cords - I had this happen once, it helped to simply replace the power supply with a telephone one, otherwise the modem refused to start and did not allow access to the settings.
3. Is the modem connected to the computer? Is it possible to connect to its Wi-Fi network and connect to the settings from another device? It happens that the problem is some kind of error on the computer itself, you can try to restart it, or try another device.
4. Another common problem is network settings. But let's talk about this now.

Problem with network connections

Works forWindows 7, 8, 10 - the names may be slightly different, but the essence is the same.

So the basic steps are here:

1. Let's go to our network adapters:

Alternative option. Press the Win+R keys and enter ncpa.cpl

1. We are looking for our connection. Right-click and go to properties. And then just click on everything indicated in the figure below:

Usually, automatic configuration helps - and your computer or laptop immediately receives the correct settings with the correct subnet from the modem itself. Another option is to set up static addresses for yourself:

IP address: 10.0.0.2
Subnet mask: 255.255.255.0
Gateway: 10.0.0.1

After such manipulations, everything should probably work. But if suddenly this doesn’t help, write about your problem in detail in the comments. I will definitely help in any way I can, right up to the setup. If these instructions helped you, also write your review - it’s useful for people, and I’m pleased. Thank you very much!

We ping and check the issued gateway

Advanced users can ping their device via command line with the following command:

ping 10.0.0.1 –t

If your device responds but doesn't work, try a different browser. Sometimes it helps. If not, there may be something in the modem itself. Another option is when the ping says that the response timeout has been exceeded, which means our modem is not accessible from the network. Even after the above manipulations, it is worth checking the current network settings and the assigned gateway. Make sure the correct settings are in place.

Before doing this, it is better to set the network settings to receive automatically (the screenshot was above). This way we can see where our computer is trying to connect.

Everything should be like this here. In my case, the settings are on another router, because... I didn’t take Yota with me on the trip, but the main thing is to compare the numbers:

IP address: 10.0.0.2
Subnet mask: 255.255.255.0
Gateway: 10.0.0.1

It happens that someone before you changed the network settings. And if all your settings are issued automatically, then the gateway here will be the modem address. But the IP address itself may vary - after all, it is unique for each device on the network, and it is distributed by the device itself (using auto settings).

Firewall and Firewall

Sometimes the address is simply blocked - by an antivirus, firewall or Windows Firewall. Try turning everything off. I can't anticipate all your current settings, so try this yourself. I am only attaching a screenshot of the firewall:

Factory reset

It happens that someone before you on the modem has already changed the subnet to another one - instead of our 10.0.0/24 (changed the range of issued addresses). I wrote about this a couple of sections above. But if you’re too lazy to tinker, then custom routers with a possible problem like this have a Reset button - look, suddenly there is one (sometimes in a recess, sometimes under the SIM card). We press it, wait a while and try to connect again. The settings will return to factory settings. Yota also has such devices.

That's all. Now you will definitely connect to your “eta” under any conditions. With this I say goodbye to you. Use, rejoice and do not be afraid of all these complex technologies. In fact, they are not that difficult) But comments are always open to you)

In order to access the router settings, its IP address is usually displayed in the address bar of the browser. Most manufacturers use addresses 192.168.1.1 or 192.168.0.1. It should be noted that the second is used somewhat less frequently, but in general these are the two most common options at the moment.

Hardware developers and software Yota companies chose to use a completely different combination: 10.0.0.1, what they were guided by, besides the fact that it is much more beautiful, is unknown. However, it is used on all modems produced by this company or its subsidiary Yota Devices and used to gain access to the Internet via 4G LTE technology.

Tasks that can be solved in the settings menu.

If there is a need to change the password that protects Wi-Fi from unauthorized connections, the network name, security settings, obtain signal strength data and similar information, you need to access the router settings. To do this, you need to enter in the address bar of your browser 10.0.0.1 /status.yota.ru. Both combinations will provide access to the page from which you can manage the router settings. If you enter http://status.yota.ru/advanced in the address bar, you can access additional settings and make all the desired changes.

Possible problems and methods for overcoming them.

However, unfortunately, sometimes significant difficulties arise in gaining access to the router settings. They can be caused by a variety of reasons and, accordingly, require different solutions.

First of all, you should eliminate the simplest problems - disconnect the router from your computer or laptop, then turn it on again. You can use for this not the port where the device was connected earlier, but the neighboring one. If, for ease of connection, an extension cable was used for testing purposes, it can be temporarily omitted. If without it the transition occurs without problems, we can assume that it is faulty and needs to be replaced.

Next, you should check the network settings of the adapter. To do this, you will need to press the Win+R key combination, wait for the window to open, and enter ncpa.cpl into it. This gives you access to view your current network connections. If there is more than one, you should select the one through which the computer is connected to the Yota router and right-click on it. A context menu will appear in which you need to select the “Properties” tab. Next you need to select: “IP version 4 (TCP/IPv4)”, where you can manually enter the following values: IP address - 10.0.0.2 Mask - 255.255.255.0 Default gateway - 10.0.0.1 DNS servers 10.0.0.1 and 8.8.8.8. If these manipulations do not lead to the desired result, you will have to set the IP address to be automatically obtained. After this, you will need to check which address was received automatically. To do this, right-click on the connection icon and select the “Details” menu item. The “Default Gateway” line should contain the value 10.0.0.1. If everything is so, but the connection does not occur, you need to ping the router.

Setting up the router

In order to ping the router, you need to press the already familiar key combination: Win+R, and then enter the command: ping 10.0.0.1 –t. The reason to be wary will be a message about exceeding the timeout interval for the request. With a high degree of probability, it means problems with the firmware or a hardware malfunction of the router. To get the full picture, it is better to try connecting it to another computer that you are confident is in full working order.

If the router responds as expected, but you cannot access the settings, there may be some problems with the browser. You can try to close the current browser, open another one and try to perform the necessary manipulations in it.

In addition, an antivirus or firewall installed on your computer can prevent you from achieving the desired result. You can try to turn them off, only then remember to turn them back on, returning the security system to its original position.

If none of the above helps, it’s time to resort to a radical remedy that has been tested by many generations of users. It is popularly known as “Seven Troubles – One Reset.” You will first have to try to find the desired button. Manufacturers place it in such a way that you won’t find it right away. It can be located on top of the power slider, under the cover, under the SIM card. Perhaps in order to press it you will need auxiliary means: a needle, a toothpick or something like that. The button must be held down for at least 15 seconds.

If such extreme measures do not help, you will have to go to a service center, or even get a new router.

Regardless of the type of modem selected, Status.Yota.ru is used to configure the device. The operator is very popular due to low tariff prices and high-speed Internet provided to its customers. On this moment offers two types of modems:

1. Simple;
2. Wi-Fi.

Using Status.Yota.ru

The site's interface is simple and easy to understand. However, before you start setting up, you need to make correct connection. How to do it:

• Operator modems do not have special drivers, so first you just need to plug the device into the USB connector.
• If the connection is successful, the brand icon will light up:

• Wait for a notification on the screen that the modem is installed.

After this, it is ready to work, you should follow these steps:

• Log in to the browser you are using.
• Automatically).

• Click the “Continue” button.
• Enter your phone number in the field that opens.
• Enter the code received by SMS message in the web interface.
• Fill in the rest of the device user form.
• Click " ".

Additional features

On Status.Yota.ru, setting up the device won’t take much time either:

• To get to the site, you need to enter “status.yota.ru” in the web address field.

• Once on the start page of the Eta ru status, the client can see data about the Internet: current and maximum speed, quality, signal level, etc.

• Click the “Device Management” button.

• In the settings tab that opens, you can enable or disable the network you are using, change its name, password and type of protection.

In addition to the main page, there are also a number of addresses Yota ru status for advanced modem settings:

• /manualupdate - update the firmware version.
• /network - change network parameters.
• /dir - hidden settings.
• /advanced - in this section of Status.Yota.ru you can change the DHCP range; in total there are three options available: 10.0.0.0, 192.168.0.0 and 172.16.0.0. You should not do this unless absolutely necessary.

To go to these tabs, you need to type 10.0.0.1/ in the address bar and then enter the name of the desired item.

How to update the firmware version using the manualupdate command

Download custom firmware from users. It depends on the device model.

Go to manualupdate.

• In the window that opens, click “Browse”.
• Select the firmware file from your computer.

• Click "Update".
• After installation is complete, the device must be rebooted.

Often you can’t go to Status.Yota.ru right away, in which case you need to enter 10.0.0.1 in the address bar.

If this does not help, then the device needs to be rebooted and tried again.