Download the program so that Skyrim does not freeze. Skyrim crashes on startup? There is always a way out! Brief overview of the game and errors
There can be many reasons why the Skyrim game crashes. Crashes can occur at different stages of the game launch - from barely launched to already loaded right during gameplay.
It is simply impossible to give a universal answer that would help everyone due to diversity possible problems, so let’s try to figure it out step by step.
Most often, Skyrim crashes if there is some problem with the sound equipment. Here you have outdated drivers for the sound card, and problems with DirectX... So first, update the drivers for that same sound card, and then start calculating the reasons why the game crashes on the desktop.
If we are talking about crashes immediately at the start after launching the game, then you should try going to the control panel through the “Start” menu, there, find the “Sound/Sounds and Audio Devices” shortcut, launch it.
A window will open in which we are interested in the “Playback” tab - in it, select “Speakers” in the list, click on the “Properties” button, then “Advanced”. It has the ability to change the sampling frequency in any direction - either higher or lower, after which you should click the "OK" button.
It's time to check the functionality of launching the game; if it still crashes, try the opposite option of the previous action. That is, if you just increased the sampling frequency, and this did not help, then try decreasing it and vice versa.
So, we've sorted out the launch, let's move on - crashes or freezes are possible immediately after creating a character. In this case, you should make sure that your computer meets the minimum system requirements, which are quite stringent. In addition, you must have the latest drivers installed for your video card and sound, and also make sure you have the latest DirectX.
If the game loads normally, but crashes after loading, then there is a sound problem, which we will combine with the next one - when there is no sound at all in Skyrim, what should you do?
And to do the following - everything can again depend on the lack of fresh drivers for the sound card; it is with the drivers that you need to start solving the problem. If they are new, but there is still no sound, then try running Skyrim with the sound settings set to “Stereo”, which is done through the control panel of your audio card.
In case the problem is still relevant, go to “Playback Devices”, where we are interested in the “Speakers” or “Headphones” item, open the settings there, the “Advanced” button.
In the advanced settings, select "Studio Quality 41K 16bit" - the problem should disappear.
If Skyrim crashes after clicking the "Play" button, then you have a problem with the DirectX libraries - install the latest version of DirectX 9.0c.
If Skyrim crashes from the menu with the game logo, first check the game cache in Steam, then remove the FFDshow codecs if you have them installed. If this doesn't help, run the game with Vista SP2 compatibility.
This is done like this - find the Skyrim shortcut, click on it with the second (right) mouse button, select “Compatibility” in the context menu, select “Vista SP2”, and then click the “Apply” button.
Load Game CTD Fix
Description:
If you play Skyrim with big amount mods, many like me are probably experiencing regular crashes when loading a saved game from the main menu. Initially, the only way to get around this in a reliable way was the "cos qasmoke" console command trick, where you move to the qasmoke cell and then manually load the save from the menu. Some players also relied on loading a save game while in a safe area and performing a second load from there. This fix makes some changes to the “Main Menu” of the game so that when you click on the “Continue” or “Load” button of a saved game, a crash when loading a saved game is prevented, without any difficulties. I automated this process in a previous "Continue Game No Crash" mod that I published a while ago, but it turned out to be less than ideal since it uses an .esp file (and scripts) that took up a pointless place in the mods' loading order. The initial dual boot took longer and many people perceived it as a harmful mod that "supposedly" inserted incorrect data into the save and that as a result they could not even play. As a result, I decided to completely change the mod and fix various problems. With new knowledge of the issues, I decided to publish this fix as a new mod, rather than simply creating an update to the old version of the Continue Game No Crash mod, for reasons I'll explain below.
The first explanation of a problem that you may miss if you have no programming experience. Many people perceived the game crashing under load as a FootIK bug and a memory issue where Skyrim tried to load too much data at once. Other people thought it was due to bad save data preventing the game from loading. The problem is related to the large amount of data to load, but the game crash is caused by multithreading and not because there is not enough memory or due to poor data saving. Essentially, the programmers at Bethesda forgot to write a "mutex" to protect critical data, which allowed one processor core to access data that another processor had not yet finished loading. As a result, a heavily modified game takes longer to load data. People used double load methods to get around loading crashes caused by the fact that there was less data between steps, which reduced the chances of a crash and the data processing was a little faster with the underlying assets being loaded first, and then loading everything else, with the underlying assets being loaded first. already cached in memory. The fix this plugin does is to prevent these crashes and limit the Skyrim game to only use one CPU core when loading. Once the game has finished loading the save, this plugin will allow Skyrim to use all the CPU cores on your system. You may experience slower loading times as a result of the single CPU core limit while loading a game save, but it is usually faster than double loading from the previous version of the "Continue Game No Crash" mod, and once the game has finished loading, all CPU cores will be back on available for use so as not to affect gameplay performance.
The reasons why I had to change the mod to a new version:
* The "Continue Game No Crash" mod may not have been the best since people were looking for things like "load ctd fix" etc. I called it "Continue Game No Crash" initially because the first version of the mod only worked with loading the most recent game, such as the "Continue" button in the main menu.
* Some people believe that my previous mod "Continue Game No Crash" is a harmful mod similar to Stable uGridsToLoad and that it introduced other problems into save games.
* In the new version of the mod there are no scripts, no .esp file, only one .dll file
Note:
- This mod is not guaranteed to work 100% for all players, in an attempt to work around bugs that exist in Skyrim. If this mod and method does not work for you, then some mods may be to blame, and it is very difficult to make the mod work for every computer and game, with every possible combination of mods.
Compatible Mods:
- Compatible with any mod.
- Compatible with Enderal.
Requirements:
Skyrim 1.9.32.0.8
SKSE 1.07.03 and higher
When updating from the "Continue Game No Crash" mod option to the new "Load Game CTD Fix" option:
1. If you have installed the previous version of the mod called "Continue Game No Crash" and want to switch to the new version "Load Game CTD Fix", then be sure to delete all files
- Delete the startmenu.swf file along the Data/Interface path, if there is one, and if you have a mod that contains the startmenu.swf file, then reinstall it.
- Delete the ContinueGameNoCrash.esp file from the Data folder in the game.
- Delete the ContinueGameNoCrash.pex script along the path Data/scripts/
- Delete the file ContinueGameNoCrash.dll in the path Data/SKSE/Plugins/
2. Install a new version of the mod "Load Game CTD Fix".
Installation: (can be done manually or through NMM / MO managers)
Place the SKSE folder from the archive into the Data folder in the game.
The fact that Skyrim crashes when loading a save can mean a lot of things. First you need to understand what conservation is. Save is the last game location. It is needed so as not to have to go through many hours of the game and various difficult moments again. It also continues from there game process. It’s not enough to go through a huge game in one sitting! Saving can be automatic (autosave) or manual (that is, just save).
They can also be shared with other people, for example, when they cannot go through some difficult period in the plot, and vice versa, if someone cannot complete the game, he can use someone else’s save if he knows in which folder they are located.
By the way, you can find them using the following path:
C/User/My Documents/My games/Skyrim/Saves.So, what should you do when Skyrim crashes when loading a save?
As already written above, there can be a great many reasons, and now the main problems and their solutions will be described:1. It is necessary to update the drivers for the video card and Direct X.
2. After installing graphic mods, Skyrim crashes. Then you need to turn off these mods and try to boot again. It helped - it means that the problem is in these mods. It didn't help - that's not the problem.
3. After installing mods that affect scripts, saves crash. Here the matter is more complicated: probably the mod added something unnecessary to the save and that’s why it stopped “breathing”. You need to turn off these mods or use a program to clean your saves. Or start new game, save a little and load.
4. A trivial and completely obvious solution - maybe it’s not even a matter of saves, but a bugged version of the game (if it’s a pirate), and then only installing another repack will help.
5. Broken skyrimprefs.ini file. There can only be one solution - find and download a new one, or delete it and check the game in
Steam (if licensed).
6. Drivers for the sound card - there may also be a problem with them. If you have the latest drivers installed, you should try running Skyrim in Stereo mode. This is done through the audio card control panel.
7. If the problem still occurs, then you can tinker with the settings. To do this, go to “Playback devices” (right-click on the sound icon in the lower right corner), again right-click on headphones or speakers, select “Properties”, then “Advanced”, and set the format value Defaults to "studio quality 41000 Hz 16 bit".
8. Why not try playing around with compatibility modes? To do this, you need to right-click on the game shortcut, select "Properties", then select "Compatibility" and change the values until the crashes stop.
If none of this helps, then it will be easier to reinstall the game and start playing through it again. If reinstallation did not help, and Skyrim crashes when loading a save, then often the problem may be hidden not in the game, but in the system itself. Either deep digging inside it, or a simple reinstallation of Windows will help here.
"Skyrim" is a multifaceted game with an incredible atmosphere and game world. However, no game is immune from crashes and bugs. So why does Skyrim crash when saving? Or when trying to load a saved game? The answers to these questions will be presented below.
Reasons for crashes when saving
The game can crash regardless of which version is a licensed or amateur build, and even without system notifications. Skyrim may crash when saving for several reasons:
- Various modifications.
- Conflicts between installed mods.
- Outdated GPU drivers.
- 32-bit operating system, instead of 64-bit - this is important for games.
- Lack of a suitable software version (DirectX, Visual C++).
Solving the problem when saving
So, first you should check the integrity of the cache, if you have a license. In the case of a pirated build, you need to check the save - if it is damaged, then, unfortunately, you will have to delete it and start the game again. If the save is normal, then it’s worth digging into the game settings.
In the event that graphic mods or modifications on character animation are installed, the user needs to disable the mods one by one to check this option. It may be worth lowering your graphics settings.
Drivers for a video card are an important thing. If the game is licensed, then updating the graphics drivers is simply necessary, since network clients support latest version games and software.
A 64-bit system is more suitable for gaming than a 32-bit system. If the problem is performance, you will have to reinstall the operating system.
Typically, when installing a game, the program asks for permission to install additional software. In licensed copies software is installed automatically, and in the installation programs you need to check the appropriate boxes.
Another way to solve the problem of why Skyrim crashes when saving is on the console. After loading the save, you need to enter the command “Payer.kill” into the console. The character dies, but the original file is overwritten, and you can safely save manually or in a fast way.
Reasons for crashes when loading a saved game
The main reasons why Skyrim crashes when loading saves:
- Installing mods or disabling them.
- Conflicting modifications.
- Corrupted save.
In the first case, the problem looks like this: the player started the game, but at some point in time installs a mod. Trying to load the game crashes. The same thing happens when a mod is disabled; when a mod is disabled in the launcher, the game may simply not start without it.
There are cases when installed mods conflict with each other, causing various glitches in the game, including crashes.
The game crash can happen at any time, so there is a chance that in one of these cases the save is damaged. After this it is almost impossible to start the game.
Solving the problem with loading saves
Modifications can cause problems, but they can also help. Therefore, modders created a mod called Continue Game No Crash. Of course, many users noted that the game takes much longer to load with it, but the benefits of the mod are also considerable.
Another method demonstrates working with the console. In the game, you need to call the console and enter the command cos qasmoke, which allows you to manually load saves from the main menu.
Many users used the method of voluntary suicide, that is, they killed the character, loaded near the last checkpoint and waited for the automatic save. After this, the save files were overwritten, and you could safely load the last save.
What should I do if Skyrim crashes when saving?
Players may encounter this problem far into the game when saves are overwritten many times. "Skyrim" is one of those games that you can play endlessly without getting bored.
In addition to automatic saving, you can use quick saving in the game by pressing the F5 key.
The first thing you need to know about mods is that you should not install them manually, relying on your own knowledge and advice from the Internet. To install modifications, there are special manager programs that install mods and prevent them from conflicting with each other.
It is better to save the game not in a new cell, but to overwrite an existing one. This way, the save folder will not be overloaded, and the game will be easier to work with fewer saves.
There is another method to combat this problem - dual booting. You need to launch two games, first load the save in the first, and then in the second. The first game may crash, but the second one will continue to work. This method will not work in licensed versions, since two games will not allow the network client to launch.
The Elder Scrolls V: Skyrim is an RPG game from the Beshesda studio, which was released in 2011. The plot of the game takes place around Dovahkiin, who has the power of the Voice, his main task is to find and kill the dragon Alduin.
But bugs and crashes are not spared, and why does Skyrim crash during the game? To answer this question, you need to understand the reasons, and there can be a lot of them. Dealing with some is a matter of two minutes, while others are quite difficult to fix.
Most problems can be resolved by downloading the latest patch for the game. Games do not come out in perfect condition, and patches exist precisely to bring them to this condition. Did not help? The problem can also be the opposite. It happens that the last patch turned out to be broken, then you can save yourself by simply downloading the previous one.
The most simple reason– broken saves due to incorrect exit from the game.
To fix this, simply load one of your previous saves or start the game over again. It’s also worth checking how many saves are stored in the \Documents\My Games\Skyrim\Saves folder. For normal functioning there should not be more than fifteen of them, so it is better to remove the excess ones.
It is also possible that the computer has simply weak characteristics. If they are not far from the minimum system requirements games, then there is nothing strange in periodic problems with Skyrim. This can be fixed by upgrading your computer. It is more difficult to deal with a laptop, since it cannot be upgraded. In this case, you can only set the lowest quality in the game settings. Or change the sound frequency, it can be very high or very low - you need to see how the game behaves. But a good result is unlikely to be achieved in this way.
One more problem Skyrim games Why does it crash during the game - outdated audio card drivers.
In this case, you just need to check for driver updates and install the latest version. Problems with updates may also affect DirectX libraries, although the game offers to install the latest version, after a while a new one may appear and Skyrim will begin to lag.
Problems can also arise due to difficulties with languages. To fix it, you need to go to Documents / My Games / Skyrim and in the Skyrim.ini file change sLanguage=ENGLISH to sLanguage=RUSSIAN. You need to set the file properties to “read only” so that the next time you launch it, it will not return to its original state.
Many crashes occur due to difficulties with the video card. First, of course, you need to check all the same updates. If they couldn't solve the problem, then it's worth looking at how many processors the video card is running. Some video cards have two of them and this may interfere with the game. You can disable one of them in its settings. Another option is that the video card has simply overheated, so it’s better to wait until it cools down.
The game can also crash due to a mod conflict; this problem affects those who installed the game a long time ago. There are two options: a game update has appeared on Steam, or a new mod for the old version of the game has been downloaded. In the first case, you just need to update the game, but the second is more difficult to figure out. Going through mods manually and looking for conflicting ones among them is a long and thankless task, but, fortunately, there are quite a lot of programs that are called mod managers. They are easy to use and can even resolve some mod conflicts themselves.
Loading...
