Wasser kraft what a brand. German technology in Wasser Kraft faucets

Q: What is WasserKRAFT?
ABOUT: WasserKRAFT is a trademark created in 2004. This brand produces faucets, shower systems, shower enclosures and trays, as well as bathroom accessories. WasserKRAFT is different high quality, original design and wide range.

Q: Where is it produced?
ABOUT: Country of origin: Germany. There is a German barcode on the package.

Q: What are faucets and accessories made from?
ABOUT: Brass, ABS plastic, polyresin, porcelain, stainless steel, zinc alloy and other metal alloys are used to make bathroom accessories.
The faucet body is made of high quality brass with a copper content of at least 59%. Brass is the best material for making a faucet body; it is characterized by durability and strength. For the manufacture of faucet components (watering cans, watering can holders) ABS plastic is used.
These materials are not subject to corrosion and are intended for use in rooms with high humidity and sudden temperature changes. In contact with water, even with high temperature, the materials do not emit particles that pose a risk to human health.

Q: What kind of packaging do we use?
ABOUT: Wall accessories are packaged in a blister or in boxes, depending on the series. Desk accessories are packed in boxes.
We use boxes for packaging faucets; boxes or blister packs are used for packaging shower heads and shower heads.

Q: Can chrome peel off from products or does it darken over time?
ABOUT: No, because All WasserKRAFT products undergo a galvanization process (multilayer application of chromium and nickel to the body of the product). The tarnish-resistant chrome-nickel coating is easy to clean and gives accessories a mirror-like shine and silver color. It is important to properly care for the products: Product care.

Q: How are the accessories attached?
ABOUT: Accessories are attached to the wall in two ways:
- Fastening to the wall is carried out using a mounting plate. The mounting plate is attached to the wall with self-tapping screws, after which the product is attached to the plate using a locking screw. (Series Oder 3000, Donau 9400, Aller 1100, Rhein 6200, Ammer 7000, Berkel 6800, Isen 4000)
- Fastening to the wall is carried out directly through the body of the product. The product is attached to the wall with self-tapping screws, after which the attachment point is covered with a decorative insert. (Main 9200, Weser 8600, Leine 5000 series)

Q: Is there a warranty for WasserKRAFT products?
ABOUT: Accessories and faucets, shower sets with mixer taps have a 5-year warranty, shower sets have a 3-year warranty, and components (heads, hoses) have a 2-year warranty. Shower enclosures have a 7-year warranty.

More about the terms of the guarantee

Q: What does the warranty cover?
ABOUT: Only for manufacturing or raw materials defects in WasserKRAFT faucets and accessories.
- on the strength of the chromium-nickel coating
- on the strength of cast parts of the product
- on the performance of the cartridge.

Q: How can I make an exchange/return?
ABOUT: Accessories:
In the presence of goods, sales and cash receipts, without a warranty card.
Faucets:
If you have the product, warranty card, cash receipt and sales receipt. If a product is found to be defective, it is necessary to obtain written confirmation from specialized service centers.

Q: Are there service centers for faucets?
ABOUT: Yes, you can get information about service centers and their work from the seller or on the Service Centers website.

Q: Is it possible to change the cartridge and taps in the mixer yourself?
ABOUT: Cartridges and taps are easy to replace:
Instructions for replacing the cartridge
Instructions for replacing crane boxes
Attention! If the replacement of the cartridge and faucets is not carried out by a service center specialist and/or the cartridge, faucets are not purchased from the WasserKRAFT supplier, then the warranty for the mixer will be terminated from that moment.

Q: Where can I buy spare parts for faucets?
ABOUT: At specialized WasserKRAFT service centers or in city stores.

Q: What kind of cartridges and faucets are in the faucets?
ABOUT: In our faucets we use ceramic cartridges with a diameter of 40 mm, 25 mm or 35 mm and ceramic faucets 90° or 180°, depending on the faucet model.
Faucets Aller 1068, Leine 3508, Main 4108 use two-stage ceramic eco-cartridges Sedal (Spain) 35 mm, with a water saving function. Water saving is achieved by adjusting the position of the mixer handle. The first stage turns on the water in an economical mode with a water flow rate of 10 l/min until there is a slight click (middle position of the handle). The second stage, after a slight click (upper position of the handle), switches the water to the full operating mode of the cartridge with a flow rate of 20 l/min.
The basis of all ceramic cartridges and taps is made of wear-resistant aluminum oxide, fired under pressure at a temperature of 1200°C, then these elements undergo an ultrasonic grinding process. High-strength ceramics increase the faucet's resistance to water hammer. All cartridges and faucets can withstand 500,000 operating cycles (opening/closing).

Q: Do faucets make noise when mixing water?
ABOUT: The mixer does not make noise, because The cartridge has special notches that absorb noise.

Q: Shower switch. What switches are used and how are they different?
ABOUT:- Ceramic rotary switch. To switch to shower or spout, turn the switch 90°. The switch operates at zero pressure. Used in all long spout faucets. Reliable and easy to use.
- Push-button switch. Operates at a pressure of 0.3 bar. To turn on the water supply to the shower, you need to lift the button, once you release the pressure, the spring will press the valve into place. The switch is also additionally equipped with a rotary manual locking mechanism for use in places with low water pressure. Used in faucets with short spout.

Q: Why do you need an aerator in the faucet?
ABOUT: Aerators are used to distribute the jet evenly.
WasserKRAFT faucets use Neoperl CASCADE® plastic and Neoperl CASCADE® silicone aerators.
Advantages of Neoperl CASCADE® aerators with ABS plastic mesh and silicone mesh:
- anti-limescale system
- the aerator helps reduce water consumption by 10%
- smooth stream even with poor water pressure
- Very low level noise
- Neoperl CASCADE® is particularly durable and indestructible
- a dome-shaped filter located inside the aerator prevents small particles and impurities from entering the water stream
- an aerator with a silicone mesh makes it easy to remove lime deposits; simply run your hand over the aerator and all dirt will be removed.

Washbasin faucets Aller 1064, Leine 3504, Ammer 3704, Main 4104 use Neoperl CASCADE® aerators with a water flow limit of 5 liters per minute.

The Berkel 4803 and Berkel 4807 mixers use Neoperl Honeycomb aerators with an adjustable jet angle and a water flow limit of 5 liters per minute.

Q: What is included with the faucet?
ABOUT:The set for bath and shower mixers includes:
- Metal hose 1.5 m in steel braid. The nut and hose cone are made of brass, have a diameter of connection to the watering can and mixer G½.
- 1-, 3- or 5-function watering can with anti-limescale system , depending on the series of mixers.
- Wall mount for shower, rotating or fixed, depending on the faucet model
- Installation kit (eccentrics and flanges).

The set for kitchen faucets, washbasin and bidet includes:
- Flexible hose Sedal (Spain) 37 cm long (without fitting) or 40 cm (with fitting), with G1/2 thread
- Aerator key (only for Weser 7803, Weser 7847, Aller 1067, Berkel 4802L)
- Installation kit.

Q: What is included in the package of the Shower Set?
ABOUT: The shower system kit includes:

Shower stand made of brass
- metal hose 1.5 m (for a watering can) and 0.6 m (for connecting to a mixer)
- 3-functional watering can with silicone nozzles and an anti-limescale system.
- shower head
- metal soap dish included with A015, A016
- installation kit
- warranty card and installation instructions

Q: What is included with the accessories?
ABOUT: The accessory kit includes mounting instructions and an installation kit.

Q: What is the dispenser spout in the series made of?
ABOUT: The dosing valve (spout) of liquid soap dispensers is made of brass and is not subject to corrosion. It withstands many openings/closings and has an easy move. It is much stronger and more durable than plastic counterparts.

Q: What kind of glass is used in the shelves and why?
ABOUT: For shelves, only hardened matte or clear glass 6 mm thick. Tempered glass is 5-10 times stronger than ordinary glass. At the same time, when breaking, such glass does not form sharp fragments, but collapses into fragments with blunt edges, which are not so dangerous to humans. Tempered glass also has thermal strength and can withstand temperatures up to 300 degrees.

Q: Water purification filters. What are they needed for?
ABOUT: Over time, sand, rust, metal scale and other foreign particles accumulate in the plumbing system. The entry of foreign parts into the mixer and its components can lead to malfunction of functional parts, such as: cartridge, faucets, switch, aerator.
This can be avoided by installing a water purification filter, which is needed to filter out foreign particles. This way you will save not only the faucet, but also other equipment in your apartment: washing machine, dishwasher, etc.

B: Check valve. What is a check valve for?
ABOUT: The check valve is designed to automatically shut off the reverse flow of water.
For faucets with a hygienic shower head, installing a check valve on the pipes is simply necessary. The pressure of hot water exceeds the pressure of cold water, therefore, when the shut-off clamp of the hygienic shower is closed, but the mixer is open, hot water will begin to penetrate the pipes cold water.

B: Reduction gear. What is a reduction gearbox used for?
ABOUT: The reduction gear is designed to protect your plumbing equipment from water hammer by equalizing the water pressure at the outlet. This is especially necessary for owners of apartments on the first three floors of high-rise buildings. A reducer is also necessary if the pressure in your pipes exceeds 5 bar or the water pressure in the pipes for hot and cold water has a difference of more than 1 bar.

The German company Wasser Kraft, widely known for its products, has been producing faucets for household use since 2004. Currently, the product range includes 17 collections, in which you can find products for the bathroom, kitchen sink, washbasins and bidets. According to information provided by the manufacturer, all products are reliable and retain their original characteristics for 20 years. Also among the declared qualities and features are: safety, high functionality, chemical resistance, original design.

According to most buyers, such products are an excellent option if you need to choose a budget model with decent quality indicators. What does a consumer get when buying craft mixers?

Quality of materials used

When designing and creating its products, Wasser KRAFT uses the best materials. Whether it's a bathtub faucet wasser craft, or a device for another purpose, each model presented to the buyer is created from the following components:

• — high quality brass (copper at least 59%) in the production of cases;
• — silicone and ABS plastic in the manufacture of meshes for aerators;
• — chromium-nickel coating, which uses the technology of sputtering nickel and chromium in several layers to form a durable coating;

A distinctive feature of product design is the implementation of calculations the best specialists, combined with original lines and shapes. This approach allows us to offer the consumer an excellent combination of functionality and modern style without compromising the overall interior design of the premises. Thanks to its refined shapes and lines, the faucet fits seamlessly into the decor of a bathroom or kitchen, and becomes an excellent solution for those who value comfort.

Usage modern technologies ensures high quality when creating plumbing fixtures. That is why the materials and components from which wasser kraft kitchen faucets and other devices are made do not emit harmful substances during operation.

And thanks to galvanization, the surface of the structures does not fade, does not deform and is easy to clean.

Crane axle boxes or cartridges

Depending on the presented models that are included in the collections, the faucets of this manufacturer are equipped with ceramic faucets at 90° or 180°, or cartridges of various diameters. The faucets included in the Aller, Leine and Main collections are equipped with two-stage eco-devices with water saving capabilities. Fluid consumption in these models is as follows:

1. To the middle position (click), through which the feed is switched on in economy mode. Water consumption when choosing the listed models is up to 10 l/min.

2. When selecting the next stage, which is also determined by a small click, the water supply switches to full use mode. The liquid flow rate, in this case, is up to 20 l/min.

Aerators: advantages of use

In addition to the presence of eco-cartridges, some models of faucets from this manufacturer also have aerators. Such devices allow you to evenly distribute the stream of water even at low pressure. Choosing faucets equipped with an aerator can not only reduce water consumption, but also provide good protection of the product from limescale and significantly reduce the noise level during water hammer.

The cartridges, or cartridges, installed in the devices of the German manufacturer are made of aluminum oxide created under pressure and undergo ultrasonic treatment. This technology ensures high resistance of devices to water hammer and maximum term operation. Regardless of the model, these mixer elements are designed for 500,000 cycles in operating mode.

It is important to note that the design features of the products allow independent replacement crane boxes and cartridges. The only drawback of this solution may be the termination of the warranty period if the mixer elements are replaced by someone other than a service center specialist.

Methods for attaching faucets

Modern craft mixers are distinguished not only by the high quality of components, but also by ease of installation. Depending on the selected model, installation of the device can be done independently as follows:

• - through flexible wiring equipped with threads that connects to hot and cold water pipes;
• - through the use of eccentrics, which, after connecting to the pipes, are closed with special flanges.

When deciding to install the Kraft mixer yourself, it is convenient to use the detailed instructions that are included with the device, regardless of the type of model.

Complete set for bath and kitchen

Modern faucets are distinguished not only by their quality, but also by their convenient configuration. For example, along with the design of a bath and shower faucet, the buyer also receives a wall mount in the form of a fixed or rotary mechanism, a 3- or 5-function shower head, which is equipped with anti-plaque capabilities.

The package also includes a device mounting kit, including flanges or eccentrics. In the kit for plumbing fixtures and kitchen sinks, the buyer will find a flexible hose, a special key for adjusting the aerator, as well as a set of installation devices. Such foresight of the manufacturer allows us to significantly reduce the installation time of the mixer, ensuring simplicity and a minimum of actions.

How often do you call a plumber?

Poll Options are limited because JavaScript is disabled in your browser.

Grohe (Germany)

The best bathroom and kitchen faucets in our rating are faucets from Grohe. The products of the German manufacturer Grohe AG, which since 2014 belongs to one of the largest transnational holdings Lixil Group Corp., are considered the standard of quality and taste. The following products are sold worldwide under the Grohe brand:

• Bathroom and kitchen faucets;
• All kinds of shower sets;
• Automatic kits for public and commercial facilities;
• Installation and flushing systems, which are supplied with floor-mounted and wall-mounted plumbing equipment from such well-known companies as Ido, Ifo, Roca, Lagard, etc.;
• Concealed (wall) mounting kits.

The company was created back in 1936 as a family business and for more than 80 years a tremendous amount of work has been done. Thanks to sound management and openness to innovation, Grohe today accounts for more than 8% of global market sales. At the same time, the manufacturer has the right to mark each manufactured part, supplied to 130 countries of the world, with the recognized quality mark “Made in Germany”.

Over the past 10 years, Grohe has created more than 240 innovative developments, most of which have been patented. And the number of awards, bonuses and diplomas exceeded reasonable limits: “Die Beste Fabrik” (“Best Plant”), “RedDot” (“Best Design”), “Good Design USA” (“Best Design USA”) and many others. The company opened 5 design centers in Europe, as well as full-cycle factories in Germany, Portugal, the USA and Thailand.

This brand is a refrain through the messages of users who are connoisseurs of high-quality bathroom fixtures. Grohe faucets are the best combination of smart design, ergonomics and excellent functionality.

The most strong point products from Grohe - a unique, engineered design. This means that every element, every detail, from the formula of sanitary brass to the angle of the levers, is repeatedly tested and verified down to the micron.

Main advantages:

1. The most extensive selection of models of all kinds of traditional, single-lever, thermostatic and sensor mixers for the bathroom and kitchen, installation systems for open and hidden installation, as well as components and accessories.
2. Impeccable design of collections, united by such features as style and functionality in a wide variety of shades, from classic gloss chrome to deep black velvet.
3. The highest degree of control at every stage of production according to EU standards, from raw materials to packaging.
4. Constant checking of product quality, including on a voluntary basis by such status organizations as Research institute Consumer and Nordhaus University of Applied Sciences, German technical control and certification service (TÜV SÜD Product Service GmbH), etc.
5. Application of the best technologies in the production of faucets: injection molding, laser welding, galvanizing of metal and even plastic elements before assembly, thermal disinfection, etc.
6. Simplified installation.
7. Safe and convenient operation of mechanical and electronic systems (various protective kits are provided against surges in voltage, pressure, etc.).
8. The widest range of prices - from 2,800 to 165,000 rubles.
9. Proven durability - the warranty period for all Grohe products is 10 years, and for professional systems up to 15 years.

Advantages: Value for money

Disadvantages: I have not yet found any disadvantages in the operation of these products

A comment:
Choosing plumbing fixtures, as well as accessories for them, is not an easy choice, especially since now the market for the production of plumbing fixtures is very diverse and there is plenty to choose from. We are renovating the bathroom and I really wanted to install a shower stand (system) because it is an excellent replacement for a shower...

Soap dish WasserKRAFT K-9429

Advantages: High-quality chrome plating, frosted glass, O-ring for reliable fixation of the glass soap dish in the holder, angular shape of the bracket, collapsible design.

Disadvantages: Didn't notice

A comment:
The holder bracket is collapsible, this allows you to change the angle of rotation of the bracket both to the left and to the right. To disassemble, you need to unscrew the countersunk screw with a hex key, exactly the same as the second screw that secures the holder to the wall mount. ...

Toilet paper and freshener holder WasserKRAFT K-6859

Pros: Excellent chrome finish, you can look in it like a mirror. Everything is made with high quality, nothing rattles, dangles or plays. The paper cover is attached through plastic bushings, which eliminates various squeaks and other extraneous sounds.

A comment:
The completely collapsible design allows you to swap the paper and air freshener holders. The 2 in 1 design with one common bracket allows you to reduce the number of holes in the wall for attaching accessories to a minimum. Previously, we had an air freshener on the floor, now, after we...

Wasserkraft K-6523 Hook

Pros: Excellent quality, easy to install.

Disadvantages: None.

A comment:
After the renovation was completed, the question arose about choosing accessories for the bath and toilet. A lot of time was spent searching in vain; I was not satisfied with the appearance or quality of products of a similar category presented in the store. We remembered that when choosing a faucet, the consultant praised the quality of the companies' accessories. ..

Liquid soap dispenser WasserKRAFT K-9499

Advantages: Unusual design, high-quality chrome plating, glass bulb, collapsible design, reliable fastening to the wall.

Disadvantages: Didn't notice.

A comment:
The dispenser is mounted to the wall not from the back as usual, but rotated at an angle of 90 degrees. This creates an interesting effect. The dispenser, as it were, extends a helping hand to the person and bends towards him. The collapsible design allows you to change the angle of rotation of the bracket with the bulb, i.e. can you make it stronger...

Buying a quality faucet is not so easy these days. Most of them do not stand the test of time and begin to leak, or even fall apart very quickly. One of the famous manufacturers of mixers - German company"Wasser Craft". How are its models different?

Manufacturer

Wasser Kraft is a German manufacturer whose main products are brass faucets and other accessories that can be used in the bathroom. Their main advantage is operational reliability and durability due to the fact that brass does not rust. This occurs as a result of the galvanization process - coating products with chromium and nickel. This coating does not fade, is quickly cleaned and regains its original appearance. The mirror shine of Wasser Craft products is difficult to confuse with products from other manufacturers.

But they began their activities relatively recently, in the early 2000s. Constant quality control of products, use advanced technologies production allows Wasser Craft to produce high-class products.

Range

The company's enterprises produce:

• faucets for bath, kitchen, washbasin, bidet;
• shower sets;
• stands, watering cans.

In addition, you can buy accessories from this manufacturer:

• various toilet paper holders;
• dispensers;
• bath mirrors;
• buckets;
• bath shelves.

In addition to wall accessories, there are tabletop ones.

Cartridges and cranebooks

"Wasser Kraft" uses in mixers different types cartridges with a diameter of 35 or 40 mm. Some models have 90° ceramic faucets. Their base is made of aluminum oxide. It is fired at temperatures above 1000 degrees and polished using ultrasound. The material becomes very durable. Its resistance to water hammer increases. Cartridges and cranebooks are designed for 500 thousand openings.

Frame

Made of brass with the addition of copper (up to 60%). It is of high quality. Various molds are used to create.

Aerator

Each of the faucets is equipped with the familiar mesh at the end of the spout. It saturates the water with air and makes the stream uniform. when using an aerator it decreases by 10 percent.

Environmental friendliness

Wasser Kraft faucets do not cause allergies.

The materials used for their manufacture do not emit harmful particles or fumes even when in contact with hot water.

Description of the mixer Rhein 1702L

Wasser Craft faucets are made of brass with chrome-nickel coating. The Wasser Craft Rhein 1702L model is designed to operate at a temperature of 90 degrees. Withstands pressure up to 9 bar. There is a Spanish cartridge inside. Manufacturers calculated that it could last for about five years.

Care

Wasser Craft mixers are cleaned of limescale and other contaminants.

Do not use abrasives, corrosive agents, or organic solvents for cleaning. Use soap solutions of neutral acidity.

But you can also get by with traditional means: treat the faucet with soapy water, rinse with warm water and wipe thoroughly with a towel.

You can also clean plastic parts.

If the contamination has been formed for a long time, the dirt has been collecting for a long time, use weakly alkaline products. Care must be taken when handling chrome plating, which deteriorates from chlorine and phosphoric acid.

• The cleaning product is applied to a rag.
• Wipe the surface of the mixer with them.
• Rinse with plenty of warm water.
• Wipe dry.

Installation

The buyer likes what comes with the mixer detailed instructions with pictures explaining the installation sequence.

Manufacturers pay attention to the fact that before installation it is necessary to thoroughly clean the pipes from accumulated debris. Blow them out and spill them with water. Only then connect the mixer.

But not all products from this manufacturer come with instructions included with the faucet. Some buyers complain that not only was it missing, but also the mounting brackets. They claim that there is no information about installing such products even on the manufacturer’s website. This complicates the installation process and generates negative reviews.

Wasser Kraft faucets with water filter

Modern people care about the quality of the water they consume. That's why they drink it only filtered. Combination faucets for the kitchen were invented specifically to ensure that taps take up less space and provide not only water for washing dishes and cooking, but also purified water. Wasser Kraft kitchen faucet with water filter has a built-in hose. Through it, purified water is supplied to the general outlet. But ordinary water does not mix with purified water.

Combination faucets save space in the kitchen and allow you to always have clean water for drinking. You no longer need to buy bottled water. It’s enough to buy and install Wasser Kraft faucets (for the filter).” They have a two-jaw mixer. A ceramic cartridge with a diameter of 35 mm is used. The product is made of brass and plated with chrome. The connection to the tap is flexible. Faucets are mounted on the sink. Available with a long swivel spout or a pull-out shower head.

There is an aerator. Wasser Craft products (mixers) are mounted horizontally. Country of origin - Germany.