Rose crochet knitting pattern. Crochet rose: knitting pattern for an original bedroom decor

Hello!

Today I have prepared for you a master class How to crochet a rose.

For the rose, I chose pink and purple Adelia “Valeri” yarn (50% wool, 50% acrylic, 50g/146m) - I used to knit from it. We also need green cotton threads for leaves and stems, hooks No. 1.5 and 2.5, wire (thin and thicker), adhesive tape and scissors.

First, we knit the petals of our rose according to scheme 1:

With hook No. 2.5, we collect 4 VP, close it in a ring and knit 3 lifting VP and 12 double crochets. At the end of the row there is a connecting column and again 3 lifting VPs ...

We take dark-colored yarn and knit 4 arches of 4 VPs, attaching them with single crochets to every second column of the previous row.

We knit 7-8 such petals. I did not wrap one of them with purple yarn (this will be the middle of the rose).

With hook No. 1.5, I scored 8 VP (in the diagram - 10), closed it in a ring and knitted, starting each row with 3 lifting VP:

1 row - 3 lifting VP and 9 double crochets (st.s / n),

2 row - repeat * 2 st.s / n, 1 st.s / n *

3 row - repeat * 2 st.s / n, 1 st.s / n, 2 st.s / n *

4 row - repeat * 2 st.s / n, 3 st.s / n, 2 st.s / n *.

It turned out such a "cup":

1 row - 3 VP and 6 st.s / n, turn the work,

2 row - 3 VP, 4 st.s / n, 2 st.s / n with a common top, turn the work,

3 row - 3 VP, 4 st.s / n, turn the work,

4 row - 3 VP, 2 st.s / n, 2 st.s / n with a common top, turn the work,

5 row - 3 VP, 2 st.s / n, turn the work,

6 row - 3 VP and 2 st.s / n with a common top.

The diagram suggests knitting each such leaf separately, each time cutting the thread. Because I don’t like to bother once again with tying knots and tucking “tails”, I suggest knitting without breaking the thread. To do this, having finished knitting a leaf, we “go down” with half-columns along its left edge, we reach the cup and begin to knit the next leaf.

Thus, we get an asterisk - a sepal of a knitted rose.

Now we knit the leaves according to scheme 3:

We start with 10 VPs. Leave a tail of thread about 10 cm long.

Then 1 row - 1 lifting VP, 2 st.b / n, 2 semist. s / n, 2 st.s / n, 2 half s / n, 2 st.b / n, 3 VP and repeat the same on the other side of the leaflet.

At the top of the leaf, tie a half stitch. s / n, st.b / n, st.b / n in an arch of 3 VPs of the previous row, 3 VPs, another 1 st.b / nakida in the same arch and then the other side of the leaf symmetrically to the first.

Now we pull the tail of the thread, which we left at the beginning, onto front side at the top of the leaf,

and knit such a chain along the middle line:

Sew a sepal to a knitted rose:

Prepare a wire hook, tie a green thread to it and insert it into the middle of the rose.

Then we wrap the stem, as shown in the photo:

It turns out like this:

I first wrapped the junction of the branches with the stem with tape, and then wound the threads. The ponytails below were also carefully secured with tape.

Now you know how to crochet a rose.

How to crochet a convex and concave stitch

Crocheted cup stand

There are many things in the world that you can knit with your own hands. It just requires a little experience and patience. The work turns out to be interesting. You can knit not only clothes, but also accessories. One of the most popular additions to clothing is a rose. It is very easy to knit by yourself. If you decide to try your hand at such work, then the main thing is to prepare the material. A crochet rose decorates any look, and the knitting pattern will help you in your work.

This rose can be used not only as an addition to clothing. By attaching an elastic band, you get a hair decoration, it looks chic on a hat, and if you attach it to a sweater, it will turn out elegant.

Making a bright crocheted rose with patterns

Before you start working, you need to remember: the outcome depends on the chosen yarn, hook, knitting density and the length of the air chain.

Each craftswoman has her own knitting density and can end up with completely different flowers. The article will describe how to crochet a beautiful and lush rose.

The very first step is knitting a chain of air loops. The length for a voluminous flower is about twenty centimeters.

Second row knitting: two columns, one yarn over in one loop, which is divided by three air loops. Double columns need to be knitted through one loop along an air chain.

Third row: two columns and one yarn over, three chain stitches, two columns and one yarn over in each loop of the previous row.

Beginning of row: seven columns with one crochet in each loop of the previous chain row for six loops. Then knit seven columns with two yarn overs in each chain stitch of the previous row, until the very end of the row.

Cut the end of the thread and fasten it. We collect the flower from the side where the petals were with one crochet. Spiral wrap it and sew it.

Continue sewing this way until the very end, and if necessary, sew on the hair elastic as well. Beautiful flower pleasing to the eye.

Create a beautiful rose for a vase

You can make an interesting decoration for your room or give it as a gift. to a loved one. Crocheting any flower, and especially roses, is an activity for persistent craftswomen who replenish their basket with new works.

You need to prepare yarn of any color. The size of the flower depends on the number of air loops. In our work we need sixty of them.

For further work, a diagram is attached:

After knitting all the steps, it turned out to be a spiral.

You can take matching threads or even a contrasting color and tie the edges. This will give the rose a more complete look.

Sew a spiral using threads step by step. The result is a flower bud.

You also need to tie a cup to the rose. The diagram will help with this:

You can add variety to the cup: make one petal small and the other larger.

Now tie the leaves. You can make both large and small (without knitting the last row).

A rose needs a stem. A straight stick will do. If you do not cut off the knots, you can attach leaves to them. Wrap the stick with green thread.

Having made the stem, we move on to attaching the cup. You need to put it a little on the stem itself so that the cup holds better, and sew it on. We also sew on the leaves.

We attach the bud to the cup and the gift is complete. You can make a bouquet of such roses and please someone. The flowers turn out very natural and natural.

Volumetric rose for beginners with description

You can create a rosette that is very elegant and sophisticated. Before starting work, you need to study the diagrams:

Using the first pattern, make three petals. We make the very first circle of loops tightly so that the hole is almost closed. Hide the starting thread, and make the one that remains long at the end. The rose will be attached to it.

Knit three petals according to the second pattern:

Knit four more petals according to pattern number four.

And according to the fifth scheme, you need to knit five petals.

The third scheme is created for the bud, to which all the petals will be attached. The beginning of the air loops (the ring itself) should be loose, so that you can then insert the stem. Fill the bud with padding polyester.

It's time to sew on the petals. Where there is a hole in the bud, it should be at the bottom. You need to sew in layers, based on the volume of the petals. You need to sew them in halves: half of the first petal, half of the second. Sew the remaining half of the first petal onto the second. Thus, sew on all three petals. It should look similar to the picture:

The remaining petals are attached in the same way. You need to see if the petals lie neatly and try them on.

Let's move on to creating the leaves and stem. Cut two small pieces of wire and one larger one. Tie the leaves according to the already familiar pattern from the previous master class: two large, four small. Wrap small pieces of wire with green tape, and when the larger wire is wrapped, attach these wires crosswise to it.

Glue leaves to the ends. Tie the sepals and assemble the work.

To create dew, stick a couple of beads.

Video on the topic of the article

For beginner craftswomen, it is better to use a video tutorial. They will describe the most basic knitting steps, and you can use a variety of videos for ideas.

You always want to diversify warm knitted clothes with something unusual. You can add a touch of spring-summer mood by decorating your things with flowers. They, of course, will not smell like a real flower, but they will not be inferior in beauty to a living plant. How to crochet roses? You will learn about this from our material.

Basics of knitting for beginners

The first thing you need to create a crochet rose is a diagram and description. And here small problems may arise for beginning craftswomen. The diagram is, of course, good, but you still need to be able to read it. In fact, there is nothing complicated about this, because almost all images have footnotes indicating what this or that symbol means. These are the most commonly used abbreviations:

• VP - air loop;
• Dc - double crochet;
• RLS - single crochet;
• SP - slip stitch or closing loop;
• PBN - half double crochet or half single crochet.

Thus, it is enough just to know how certain loops are knitted, and everything else is a matter of technique and dexterity. You can learn more about how to crochet a rose for beginners from the master classes below.

Openwork queen of flowers

Creating openwork jewelry is real magic. The most amazing thing about this process is that you will not be able to appreciate the beauty of the flower until you finish knitting. However, don’t worry: you will succeed, and this lesson with step-by-step description and photos will tell you how to crochet a rose.

Necessary materials:

• hook 5 mm;
• pink worsted yarn;
• green worsted yarn;
• needle with a large eye;
• scissors.

Process description:

We knit together: a rose to decorate a shawl, hat and stole

If you have been using crochet for many years now, then you probably have a lot of knitted items in your wardrobe. Undoubtedly, there will be those who, in your opinion, are lacking something. Try decorating them with flowers. For example, volumetric rose crocheted has quite simple diagram work.

There are many things in the world that you can knit with your own hands. It just requires a little experience and patience. The work turns out to be interesting. You can knit not only clothes, but also accessories. One of the most popular additions to clothing is a rose. It is very easy to knit by yourself. If you decide to try your hand at such work, then the main thing is to prepare the material. A crochet rose decorates any look, and the knitting pattern will help you in your work.

This rose can be used not only as an addition to clothing. By attaching an elastic band, you get a hair decoration, it looks chic on a hat, and if you attach it to a sweater, it will turn out elegant.

Making a bright crocheted rose with patterns

Before you start working, you need to remember: the outcome depends on the chosen yarn, hook, knitting density and the length of the air chain.

Each craftswoman has her own knitting density and can end up with completely different flowers. The article will describe how to crochet a beautiful and lush rose.

The very first step is knitting a chain of air loops. The length for a voluminous flower is about twenty centimeters.

Second row knitting: two columns, one yarn over in one loop, which is divided by three air loops. Double columns need to be knitted through one loop along an air chain.

Third row: two columns and one yarn over, three chain stitches, two columns and one yarn over in each loop of the previous row.

Beginning of row: seven columns with one crochet in each loop of the previous chain row for six loops. Then knit seven columns with two yarn overs in each chain stitch of the previous row, until the very end of the row.

Cut the end of the thread and fasten it. We collect the flower from the side where the petals were with one crochet. Spiral wrap it and sew it.

Continue sewing this way until the very end, and if necessary, sew on the hair elastic as well. A beautiful flower pleases the eye.

Create a beautiful rose for a vase

You can make an interesting decoration for your room or give it to a loved one. Crocheting any flower, and especially roses, is an activity for persistent craftswomen who replenish their basket with new works.

You need to prepare yarn of any color. The size of the flower depends on the number of air loops. In our work we need sixty of them.

For further work, a diagram is attached:

After knitting all the steps, it turned out to be a spiral.

You can take matching threads or even a contrasting color and tie the edges. This will give the rose a more complete look.

Sew a spiral using threads step by step. The result is a flower bud.

You also need to tie a cup to the rose. The diagram will help with this:

You can add variety to the cup: make one petal small and the other larger.

Now tie the leaves. You can make both large and small (without knitting the last row).

A rose needs a stem. A straight stick will do. If you do not cut off the knots, you can attach leaves to them. Wrap the stick with green thread.

Having made the stem, we move on to attaching the cup. You need to put it a little on the stem itself so that the cup holds better, and sew it on. We also sew on the leaves.

We attach the bud to the cup and the gift is complete. You can make a bouquet of such roses and please someone. The flowers turn out very natural and natural.

Volumetric rose for beginners with description

You can create a rosette that is very elegant and sophisticated. Before starting work, you need to study the diagrams:

Using the first pattern, make three petals. We make the very first circle of loops tightly so that the hole is almost closed. Hide the starting thread, and make the one that remains long at the end. The rose will be attached to it.

Knit three petals according to the second pattern:

Knit four more petals according to pattern number four.

And according to the fifth scheme, you need to knit five petals.

The third scheme is created for the bud, to which all the petals will be attached. The beginning of the air loops (the ring itself) should be loose, so that you can then insert the stem. Fill the bud with padding polyester.

It's time to sew on the petals. Where there is a hole in the bud, it should be at the bottom. You need to sew in layers, based on the volume of the petals. You need to sew them in halves: half of the first petal, half of the second. Sew the remaining half of the first petal onto the second. Thus, sew on all three petals. It should look similar to the picture:

The remaining petals are attached in the same way. You need to see if the petals lie neatly and try them on.

Let's move on to creating the leaves and stem. Cut two small pieces of wire and one larger one. Tie the leaves according to the already familiar pattern from the previous master class: two large, four small. Wrap small pieces of wire with green tape, and when the larger wire is wrapped, attach these wires crosswise to it.

Glue leaves to the ends. Tie the sepals and assemble the work.

To create dew, stick a couple of beads.

Video on the topic of the article

For beginner craftswomen, it is better to use a video tutorial. They will describe the most basic knitting steps, and you can use a variety of videos for ideas.

Knitted flowers can act as a decoration for clothing, for example, as a brooch, or be part of a product. Don't know how to crochet a rose? This is not difficult even for beginner craftswomen. With ours step by step instructions and patterns you will learn how to knit flowers using different techniques, different sizes and types. All you need is yarn, a hook, a little time and patience.

We have prepared a description 3 different ways knitting flowers of varying complexity. Each of these descriptions can be regarded as a master class for beginner knitters who know how to knit chain stitches, double and single crochet stitches, and connecting stitches.

Simple crochet roses

This is an easy way to knit a rose especially for beginners. The flower is made in one piece and then stitched together. First you need to tie something similar to an openwork ribbon, and then assemble it in the shape of a flower.

• First you need to cast on 33 air loops (v.p.);
• In the first row we knit a double crochet from the 5th loop from the hook. *Then insert the hook through one loop from the first stitch and knit a st from it. with double crochet (s/n), 1 ch, st. s / n *. Repeat between stars until the end of the row;
• 4 ch, *1 st. s/n, art. s/n, 1 vp, 1 tbsp. s/n from the same loop. 1 tbsp. s/n, 1 v.p., 1 tbsp. s/n from the same loop*. Continue to the end of the row from * to *;
• 2 ch, single crochet (st b/n), * 8 tbsp. s/n on 6 loops of the previous row, 2 tbsp, inserting the hook under the jumper*. We repeat from * to *.

Braid knitting pattern

Symbols on the diagram:

• o - air item;
• T - st. double crochet;
• + - art. without crochet

This completes the crocheting of a rose. We ended up with something similar to braid, which now needs to be assembled into a rose. To do this, take a needle and thread, twist the braid in a spiral and secure with the needle. Our flower is ready. Now it can be sewn onto a hat or, by attaching a pin to it, used as a brooch.

Tip for beginners: crocheting roses is best done using smooth and plain-dyed yarn. Mohair or grass will add additional volume, and the rose will not look so impressive. And section-dyed yarn will make the flower too variegated.

Another way to crochet a rose

To make such a rose, you first need to knit the petals separately, and then put them all together in any order. The number of petals depends on the size of the rose, but on average it is 15-20 pieces. The petals are knitted in double crochets.

• We perform 4 air loops. Crochet 3 tbsp. with 2 yarn overs from the first loop;
• We make a lift from 3 air. loops (we begin each row with this), one stitch, and then knit 2 stitches from each loop;
• 3 tbsp., 2 times 2 tbsp. from 1 loop, again 3 tbsp;
• 4 tbsp, 4 times 2 tbsp from 1 base, 4 tbsp;
• 4 tbsp, 2 tbsp. from 1 loop, 6 tbsp., 2 tbsp. from 1 loop, 4 tbsp;
• We knit in stitches from each loop. We repeat this row again;
• We skip 1 loop, knit in stitches to the end of the row, the last 2 sts. knit with one top;
• 2 times we knit 2 stitches with one top, 3 tbsp., one st. with one crochet, 2 tbsp., 1 tbsp. with one crochet, 3 stitches, 2 times 2 tbsp. with one top.

Rose petals can be the same color or different. Once they are all connected, collect them into a flower and fasten them together. Start picking from the center, twisting the inner petals into a bud shape. Spread the outer petals.

If you have no one to take a master class on knitting a flower for beginners, our detailed instructions and diagrams will help you cope with this task. Just be careful and act as described.

Circular crochet roses

In this method, the rose is knitted in the round. This means that nothing needs to be sewn together. At the end of knitting you will have a finished flower.

We start knitting by casting on 5 chain stitches and joining them in a circle. Next we proceed according to the scheme:

• In the first row we knit 7 tbsp. B/n, connect them, make 2 air loops;
• In the second row, first knit 1 tbsp. B/n, then from each loop - 2 tbsp. b/n to the end of the row, we connect the columns;
• 3rd row. 4 ch, 1 dc in the second loop of the previous row, 3 ch, 1 dc in the fourth loop. We continue to the end of the row, knitting the columns by inserting the hook into the even loops of the 2nd row. We finish the 3rd ch, connect them with the ch we started with;
• 4th row. We continue crocheting roses. On three chs of the previous tier we knit: st b/n, st s/n, st. With 2 double crochets, st s/n, st. B/n. Repeat until the end of the row. This is how the first petals of the future rose appear;
• 5th row. On the first 3 loops we knit connecting posts. So we “get” to the top of the petal and start the fifth row from here: ch 3, dc on a double crochet stitch, repeat to the end, join;
• 6th row. St b/n, st s/n, 3 st with 2 double crochets, st s/n, st b/n. In this sequence we knit the petal further. The result is a second row of petals;
• 7th row. Using connecting posts we again reach the top of the petal of the previous tier. On the middle double crochet stitch, make a double crochet stitch, ch 5, and so on;
• 8 row. Inserting the hook into the arch of air loops, we knit: st b/n, st s/n, 5 sts with 2 double crochets, st s/n, st b/n. We continue in the same way until the end of the row. This is how we got the third row of rose petals.

Using this principle, you can knit as many tiers of petals as needed.

The rose is ready.

If you are looking for information on how to crochet a rose with a step-by-step description, use our instructions or find a video on the topic.

It is better to crochet roses using medium-thick yarn. If you use one that is too thin, the flowers will not hold their shape well. Yarn that is too thick will make the roses look shapeless.

The composition of the yarn also matters. Viscose or silk is quite heavy. A crocheted rose may turn out too soft and shapeless. It is best to knit flowers from cotton, linen, or a mixture of wool and acrylic.

Where to use crocheted roses? As a rule, they are used to decorate hats, jackets, bags, and make spectacular brooches. Sofa cushions completely strewn with knitted flowers look very original.