ecosmak.ru

How to wash the floor with a zelmer washing vacuum cleaner. Rules for using a washing vacuum cleaner for high-quality home cleaning

26.10.2017 1 8 754 views

The washing vacuum cleaner is a universal device. It is available for both wet and dry cleaning. But before you start cleaning up, you need to know how to use a washing vacuum cleaner correctly?

How does a washing vacuum cleaner work?

The washing vacuum cleaner allows you to make any surface clean without leaving stains and streaks. At the same time, the washed area dries quickly. All this is available thanks to the design of the device.

  • the surface cleaning device is equipped with two reservoirs;
  • one tank is for clean water;
  • another tank for a special composition;
  • the composition, in the working condition of the vacuum cleaner, rises through the hose and enters the nozzle with a spray;
  • the resulting pressure sprays the composition onto the contaminated area;
  • liquid dissolves dirt, absorbs it;
  • the vacuum cleaner draws in dirt and sends it to a tank designed for this purpose.

The washing vacuum cleaner perfectly copes with dry cleaning of the room. The device removes hair, fluff, food from the floor and other attributes that animals leave behind.

The device comes with the necessary equipment:

  1. Hose.
  2. Bag.
  3. Tubes.
  4. Filters.
  5. Nozzles.

How to prepare equipment for work?

It is easy to use the washing vacuum cleaner for its intended purpose. First you need to make sure that all the components are in their places. Next, you need to perform a few more manipulations, which may differ depending on the presence or absence of a filter in the model. And you can safely start cleaning the territory.

  1. Fill the container with water.
  2. Add the required dose of the special compound.
  3. Bring one end of the tube through which the liquid will flow to the spray nozzle. Connect the other end to the telescopic tube.
  4. Connect the hose and tube to the appropriate nozzle.
  5. Connect the hose to the unit.
  6. Connect to electrical supply.
  7. Start wet cleaning.

If you have a vacuum cleaner with a filter, for example, Thomas or Karcher brands, you need to take a few additional steps.

  • in a water container with dirt, add a defoamer if you use shampoo as a detergent;
  • make sure that the fine filters are washed and in place;
  • the cleanliness of the filter is important.

Assembling and using the washing vacuum cleaner is simple, the main thing is to follow the instructions. Soon, the technique for eliminating dirt with a wet method will become an indispensable assistant. The washing vacuum cleaner perfectly copes with pollution on surfaces resistant to moisture.

  • laminated floors;
  • linoleum;
  • ceramics;
  • glass;
  • carpets on an unnatural basis;
  • stone surfaces;
  • furniture, the coating of which is resistant to water.

Wet cleaning with the unit is excluded in relation to:

  1. Carpets made from natural backing.
  2. Furniture unstable to water.
  3. Parquet.

In this case, dry cleaning is suitable.

How to wash the floor with a washing vacuum cleaner?

Everyone knows how to clean surfaces by dry cleaning. Therefore, consider wet cleaning. Before washing the floor, make sure that moisture and household chemicals will not harm the surface. To do this, try the action of the technique on a small area of ​​\u200b\u200bcoverage. Your actions are as follows:

  1. Armed with the instructions, assemble all the components of the vacuum cleaner.
  2. Fill up the tank the right amount water.
  3. Add the detergent composition to the container intended for it.
  4. If there is dirt on the coating, apply the mixture to it.
  5. Turn on the device and at maximum power, treat the surfaces with a cleaning mixture. In this case, the quality of cleaning depends on the correctness of your actions. So, start the process from the far corner of the room, working with an overlap brush.
  6. Rinse off surfaces with clean water.
  7. Dry the coating after wet cleaning by using the suction nozzle.

Linoleum and ceramic tiles are best treated with a washing vacuum cleaner.

Laminate

The floor covered with laminate, under the influence of moisture, quickly becomes unusable. However, not all laminate flooring reacts negatively. Pay attention to the class of the product. For example, grade 32 and 33 material is coated with a layer that repels liquid, making it more durable.

Such a product can be subjected to liquid treatment. While the product of class 31 can only be subjected to dry cleaning. In any case, while washing the room, the power of the device should be medium or high.

The action of the unit is reduced to the fact that a special solution is sprayed over the surface, moistening it. With low power, the vacuum cleaner will not be able to dry the floor well. Water will get into the space between the boards. The process of decay will begin. Work at high power to prevent liquid from flowing under the laminate.

And it will not be difficult to make it unusable if you follow the rules.

  • remove dirt from the laminate no more than twice every seven days;
  • do not replace the detergent with alkali;
  • do not use products that contain silicone and wax;
  • make sure that moisture does not get into the space between the boards;
  • periodically apply mastic to the joints to ensure good sealing;
  • avoid exposure to hot steam;
  • do not use brushes with hard bristles to eliminate dirt.

You can preserve the product's original appearance and extend its service life if, instead of using a washing vacuum cleaner, you can use a microfiber cloth wound around a mop for cleaning. The fabric wipes the floor well without damaging it.

Parquet

Wet cleaning of parquet is not recommended. Remove dirt from the coating, preferably with a semi-moist rag. However, if you do not doubt the strength of your parquet, you can use a washing vacuum cleaner, subject to two rules:

  1. Make sure that the coating is a parquet board that has been impregnated with a special compound and treated with a protective varnish.
  2. Turn on the vacuum cleaner at full power. So, it does not soak the surface much and quickly absorb moisture from the coating.

Rules for use for carpets

To remove debris from the carpet and refresh its colors, you will need to prepare the necessary items:

  • carpet cleaner;
  • clean water. It will need to be poured into a special tank that is placed in a vacuum cleaner;
  • a nozzle having the form of a brush;
  • washing device.
  1. Check how the carpet will react to the detergent. Checking is especially important if chlorine is included in the composition, as this substance spoils the pile and reduces the brightness of the colors of the product. To do this, walk on a small area of ​​​​the carpet with a sponge dipped in the product. You can wash the carpet in the absence of any changes.
  2. Place the “vibrating brush” nozzle and remove all the dirt that lies on the surface of the coating. This stage is very important, since large pieces of dirt, and balls of dust, can clog the filters at the washing unit.
  3. Fill the container with water.
  4. Add a special agent in the amount indicated in the instructions. Even a small increase in the dose can lead to damage to the carpet.
  5. Put on the brush head. In this case, the shape of the brush determines the pile of the product. If the pile is long, the nozzle should have long bristles. Short-pile carpet means using a brush with shorter bristles.
  6. Move the nozzle up and down until the carpet is clean.
  7. To make cleaning more successful, treat the surface in small areas.
  8. When wet cleaning is over, dry the carpet with a vacuum cleaner. Of course, the carpet will not dry immediately. It will take about two hours to completely dry a short pile carpet. Long pile will dry for at least three hours.

How to clean windows with this vacuum cleaner?

The presence of the "window cleaning" function makes it possible to take care of the windows. For example, Zelmer washing vacuum cleaners do an excellent job of this task.

  • set the required length of the tube;
  • attach a nozzle to it to eliminate dirt in hard-to-reach places;
  • to avoid streaks, set the water supply level to a minimum;
  • start cleaning windows by moving the brush slowly from top to bottom. The gradual advancement of the brush lower and lower will prevent the appearance of streaks, smudges and dirty marks.

Thus, it is possible to wash all windows that do not have a rubber seal. The fact is that when heated, it can melt.

What else is a washing vacuum cleaner for?

A washing vacuum cleaner can not only clean floors and windows, it perfectly removes old stains on upholstered furniture.

  1. Prepare a special solution.
  2. Pour it into a container.
  3. Attach a special nozzle to the hose.
  4. Move it up and down. Furniture is cleaned under high pressure, which contributes to the rapid dissolution of dirt. All dirt is sucked up by a vacuum cleaner.
  5. Pour out the dirty water.
  6. Rinse the container.
  7. Refill with clean water without adding any compounds.
  8. Rinse the upholstery.

Use the crevice tool to clean dirt in hard-to-reach places.

Video: how to use a washing vacuum cleaner?

How to clean and care for a washing vacuum cleaner?

The suction power may decrease, the motor may start to work with anguish due to the peculiarities of use. Perhaps the device is very dusty inside.

  • try to free the bag from dust;
  • inspect it for damage;
  • wash the container with a special agent;
  • clean the water filters every time after cleaning;
  • properly clean all parts. It can be both wet cleaning and dry;
  • rinse the nozzles thoroughly, having previously freed the roller from dirt;
  • remove dirt near the blades.

By taking care of the equipment in this way after every five cleanings, you will extend its service life.

A conventional vacuum cleaner is not enough for a full cleaning of the room and carpet cleaning. Its application has always been considered as a preliminary step before wet cleaning, which was previously done by hand.

Since the advent of washing models, it has become possible to combine these two steps and make wet cleaning quick and easy. At the same time, you need to know how to use a washing vacuum cleaner in order to fully realize all the advantages of this household appliance.

Washing vacuum cleaners are not limited to basic functions. In addition to dry and deep wet cleaning with detergent, some models can:

  • clean up large debris;
  • collect liquid from the floor, other surfaces;
  • clean tiles, glass, linoleum, stone, furniture from dirt;
  • perform humidification, aromatization of the room;
  • clear clogged tubs and sinks.

With these options, you can carry out a thorough cleaning. The most popular among washing vacuum cleaners are German household appliances Thomas and Polish Zelmer.

Examples of multifunctional models:

  • Thomas Twin Tiger with wet dust filtration, equipped with the functions of dry and wet cleaning, liquid cleaning.
  • Zelmer 919.0ST the same device in terms of the set of functions, a set of nozzles which allows you to work with soft, fleecy, stone, marble, parquet surfaces.

Technical solution

The main disadvantage of conventional dust collectors is the release of fine dust through the outlet, which then settles in the room. In the washing version, this is eliminated by the presence of two chambers with clean and dirty water.

From the first, under pressure, water is sprayed over the surface. In the second, waste moisture is collected along with dust and dirt. To improve the cleaning properties, detergents are added to the chamber with clean water. Usually the manufacturer recommends detergents own production. For example:

  • Thomas ProTex V recommended for waterproof floor coverings, furniture upholstery.
  • Thomas ProFloor designed for cleaning ceramics, PVC, and other similar coatings.

Depending on the location of the parts, the washing machines have a vertical or horizontal design.

An example of an upright vacuum cleaner - Zelmer ZVC026XX. Horizontal arrangement of mechanisms at Zelmer ZVC763HPRU with water filter. Similar models have and German manufacturer Thomas - vertical Thomas Prestige 20S Aquafilter, horizontal Thomas Twin Tiger. Both models have water filtration.

Preparation for work

Before the first use, it is necessary to carry out an external inspection for the presence of faults, check the complete set. In their absence, you can start preparing for operation. To do this, the vacuum cleaner must be disassembled in the following sequence:

  1. Get containers.
  2. Pour clean water into the dirt collection tank.
  3. Add detergent according to the manufacturer's recommendation.

After that, assemble the device in reverse order and connect attachments:

  1. Install the desired nozzle on the tube.
  2. Connect it to the hose.
  3. Insert the hose into the appropriate socket on the housing.
  4. Unwind the cord, connect it to the network.

When working with a vacuum cleaner that has a water filter, you also need to check the presence of clean fine cleaning modules, check the aqua filter itself, and when using shampoo, add a defoamer and splash protection to the waste water container.


Cleaning

To achieve the most effective result, follow the recommendations that will make restoring order faster and more comfortable:

  • For dry sand or other similar debris, it is best to use the dry cleaning function using the turbo brush attachment.
  • It is advisable to clean carpets with successive up / down movements in the direction of the pile.
  • It is worth starting work from the corner farthest from the entrance, approaching the door.
  • After the initial cleaning, it is recommended to re-clean with clean water.
  • You can speed up the drying of the cleaned surface by drying in the collection mode.

Care after application

After cleaning, the device must be washed. Proper maintenance will ensure proper safety and performance, help to avoid the appearance of unpleasant odors and mold inside the case.

For this you need:

  1. Disconnect the device from the network.
  2. Dismantle attachments.
  3. Open the lid, remove the containers.
  4. Drain dirty water.
  5. Rinse and dry tanks.
  6. Collect the vacuum cleaner and store it until the next cleaning.

Features of work

Most often in stores you can find washing vacuum cleaners from Zelmer and Thomas. All such devices have aqua filters that reliably hold fine dust inside, mixing it with water.

Thomas

Some German models have a wet filtration system with an injector, which includes a water filter module, a porous element included in it, and an aqua atomizer suction cube.

Before wet cleaning, the aquafiltration system must be brought into working position. For this:

  • in the main compartment you need to insert a container to collect dirty water;
  • install the water filter, holding the cover;
  • install a block with a porous element and a suction cube;
  • Pour clean water into the dirt collector.

You also need to make sure that the atomizer is functioning.

After cleaning, the Thomas filtration system must be dismantled. Elements of the filter, injection, tank should be washed and dried. Thoroughly wipe the working compartment with a dry cloth, and clean the cover from dirt.

Zelmer

Before cleaning, vacuum cleaners from this manufacturer require special preparation of the filter device module:

  • a partition should be installed in the dust collector chamber, the blinds of which should be directed downwards;
  • then you need to pour water into the container;
  • at the end of the preparation, it remains to install the wet cleaning module itself.

After use, the filter with a baffle must be removed, washed, dried and reinstalled. After 30 hours of operation, the Zelmer water filter needs to be replaced.

The complexity of the design of Thomas machines equipped with a water filter requires time for post-harvest maintenance. This makes you approach cleaning more thoroughly. When choosing a model, consider this parameter.

Dirt accumulates quickly enough in any dwelling. Modern women, even distracted from their careers and staying at home with a constant frequency, cannot afford to do daily cleaning. And weekly washing of floors cannot ensure cleanliness on long time. Technical devices come to the aid of housewives - modern vacuum cleaners. However, the dry method of getting rid of garbage is not always suitable for households. Allergy-prone children and adults often suffer from invisible dust that rises into the air when cleaning and then settles on upholstered furniture, curtains and a chandelier. In this case, experts advise purchasing an electric device for wet cleaning. According to the instructions, the Zelmer washing vacuum cleaner has good cleaning performance, and has been used at home for a long time without serious complaints.

Manufacturer

Zelmer is a popular brand today with almost seventy years of history. The company's production is established in Poland. However, since 2013, the company has been part of the German concern BSH, led by Bosch. The Zelmer trademark has become famous for the manufacture of household mechanized appliances, half of which is exported. In an effort to expand the range and conquer new sales markets, the Zelmer washing vacuum cleaner has replaced the usual one. The instruction manual says that the electric au pair will clean floors from almost all materials, carpeting, upholstered furniture, and even windows from dust and dirt.

How to choose a good vacuum cleaner?

Going to a home appliance store, you need to decide on the main parameters of a future purchase. If we are talking about a vacuum cleaner, then the main characteristics will be:

  1. Device type: for dry or wet cleaning.
  2. Type of control: electronic or mechanical.
  3. The amount of energy consumed is 1300 - 2000 W. In order to save money, it is recommended to purchase a device with a minimum value.
  4. Suction power ranging from 250 to 480 W directly affects the speed and quality of cleaning. The higher the indicator, the more thoroughly the dust will be absorbed with less time.
  5. Type of dust collector: container, replaceable bag, aqua system.
  6. Filters of various classes that capture a certain percentage of dust. Here the best indicator is 99.9%, and the worst is 80%.
  7. Permissible noise level from 70 to 90 dB.
  8. Equipped with nozzles necessary for cleaning specific surfaces: crevice, round soft and hard, turbo brush or specialized devices.
  9. The mass of the device is from 4 kg.
  10. Storage position: vertical or horizontal.
  11. The location of the wheels is preferable on the bottom of the device, which greatly adds to the maneuverability.

It should be borne in mind that the choice of the last four parameters is not universal and depends on the preferences of the buyer. As for the Zelmer washing vacuum cleaner, the instruction warns of exceeding overall dimensions above the standard ones to expand the cleaning possibilities due to the presence of additional functions.

Vacuum cleaner characteristics

The Zelmer zvc752stru model has become widespread due to the most acceptable parameters for the Russian consumer:

  • possible dry and wet cleaning;
  • electronic control system;
  • power consumption 1600 W;
  • maximum suction power 350W;
  • volumes: garbage collection bag 2.5 l, water collection tank - 5 l, detergent container - 1.7 l;
  • 5 levels of cleaning: dust collector, 3 sponges and fine cleaning with a HEPA H11 filter captures up to 99% of dust;
  • noise at 84 dB;
  • nozzles: for soft surfaces, for collecting liquid dirt, small size;
  • brushes: universal, slotted, small, turbo, specialized for parquet;
  • equipment weight 8.5 kg;
  • 2 ways of storage;
  • the location of the wheels on the side surfaces.

According to the instructions for use, the Zelmer washing vacuum cleaner does an excellent job of cleaning at medium suction power. The household appliance qualitatively performs dry and wet cleaning of floor coverings, upholstered furniture and collects spilled liquids.

Safe use

To use the technique without a threat to life and health, you must adhere to certain rules:

  1. Connect exclusively to a 230 V network.
  2. Do not pull on the wire when pulling the plug out of the socket.
  3. Do not turn on the device in case of visible damage.
  4. Do not wet or touch the vacuum cleaner and plug with wet hands.
  5. Do not run over the power cable with wheels.
  6. Disconnect from the mains when disassembling and cleaning.
  7. Do not suck up burning and smoldering objects, flour, cement, gypsum and printer powder with a vacuum cleaner.
  8. It is not recommended to clean flammable liquids with the appliance.
  9. Carry out cleaning only in a horizontal position on all wheels.

The instruction of the Zelmer washing vacuum cleaner in Russian warns against children and untrained users from accessing the device.

How to prepare the vacuum cleaner for work?

Assembly of the device begins with connecting the hose to the container on one side and to the telescopic tube on the other. After that, you need to adjust the convenient length of the pipe using the available button. Picking up the nozzle and putting it on the free end of the pipe, you can pull out the electrical wire and insert the plug into the outlet. The power button will allow you to start working and clean the room.

To understand how to use the Zelmer washing vacuum cleaner for wet processing, you need to assemble the structure.

  1. First, attach the sprayer cap to the suction hose handle.
  2. Secondly, using special holders, put on the liquid to the suction hose and connect the fitting to the pipe and nozzle.
  3. Third, check that the fitting is securely fastened to the liquid valve.
  4. Fourth, by turning on, make sure that the assembly is correct.

End of process

The instruction of the Zelmer washing vacuum cleaner describes the cleaning process in stages. Just a few steps and the device will serve without problems for a long time.

  1. Switch off and disconnect the vacuum cleaner.
  2. Wind the wire, making sure that it does not twist, and the plug does not hit the body.
  3. Remove the hose from the body by turning the nozzle until it stops.
  4. Pull out the hose end by pressing the red button.
  5. Disconnect the pipes and remove the nozzle or brush.
  6. Empty the container from dirty water and rinse it.
  7. It is also advisable to dismantle and wash the filter, tubes, hoses and nozzles.
  8. Before assembly, it is recommended to dry all parts of the vacuum cleaner thoroughly.

Aquawelt function

According to the instructions of the washing vacuum cleaner, "Zelmer Aquavelt 1600" is the same Zelmer zvc752stru or, as it is also labeled, "Zelmer 1600". The triple name of the technique emphasizes the aquafilter included in the kit and the power consumption. The Aquawelt function is as follows. The sucked up dirt through a hose of the vacuum cleaner gets to the container filled with water. Here, small particles get wet, become heavier and fall to the bottom. The air that has passed through the filter again enters the surface to be cleaned. Since water molecules are present in the ejected air, they combine with the remaining microparticles of dust and fall to the floor in a duet. Repeated swiping of the nozzle over the surface brings the quality of cleaning to perfection.

Advantages

The mass of the advantages of the device, described in the instructions for the Zelmer 1600 washing vacuum cleaner, boils down to the following pluses:

  • multifunctionality;
  • optional turbo brush for heavy dirt and carpets;
  • Convenient washable HEPA filter.

From the point of view of dominance over similar vacuum cleaners of the same price segment, the technique is different:

  • eight-meter automatically assembled cord;
  • five step power regulation;
  • the presence of an aquafilter;
  • big amount nozzles;
  • availability of spare parts and consumables;
  • convenience of control buttons and access to filters;
  • the possibility of washing windows;
  • deodorization function;
  • cleaning clogs in bathtubs and sinks.

Flaws

Experts note a number of inconvenient moments when using the device, which are not indicated in the instructions for the Zelmer washing vacuum cleaner:

  • large mass;
  • excessive noise;
  • unreliability of the spray element;
  • large dimensions;
  • constant assembly, disassembly, washing, drying;
  • not quite high-quality cleaning of parquet and natural carpets.

Vacuum cleaner Zelmer 919.0 st belongs to a variety of detergents. Ideal for an apartment or small house. Despite the fact that the name of the manufacturer sounds more modest than similar ones, the vacuum cleaner is functional, reliable and easy to use no less than others.

Vacuum cleaner Zelmer 919.0 st

When choosing equipment for the home, I want it not to disappoint and serve for a long time. This requirement applies not only to a washing machine, TV or gas stove, but also to a vacuum cleaner. The choice of the latter is represented by a wide range of various types, models and brands that have proven themselves from all sides. When it comes to buying, value for money often comes first.

Why he?

Most women, with enviable regularity, have to scrub endless mountains of dishes, square meters of floors, windows, mirrors and much more, as well as rub dust that comes out of nowhere. Few people are happy with the cleaning process, and here it will be very important to mention a real assistant: a washing vacuum cleaner. Multifunctional, it will make your homework much easier, freeing up time for more pleasant things. With it, you can:

  • remove dust from the floor, carpet, ceramic tiles, heaters, narrow gaps, furniture, curtains / curtains;
  • clean clothes;
  • wash floors from almost any material;
  • wash windows, mirrors and other glass surfaces;
  • clean carpets or carpets, as well as upholstered furniture with textile upholstery, by wet cleaning.

Vacuuming can be done the classic way, but you can use water. For dry cleaning, a bag for collecting garbage is included, like with conventional vacuum cleaners. At the same time, I would like to note that the minus of dry cleaning with a conventional vacuum cleaner is suspended microparticles of dust and dirt, fungal spores, saprophytes and other microorganisms that are an integral part of the surrounding world and constantly living in the air. It is completely impossible to destroy them.

Benefits of wet cleaning

Firstly, after such cleaning, the air is fresher, because, unlike the bag used for dry cleaning, the water container is always kept clean, therefore, it does not emit an unpleasant odor during operation. Secondly, the quality of mopping with a special nozzle is much higher than if you had to wield a mop: after all, with its help it is not always easy to get into hard-to-reach places. In addition, again, the question of hygiene arises: the water in the bucket must be changed periodically; if you use any detergents, they must be washed off again so that there are no marks on the floor.

By the way, the possibility of using Zelmer 919 detergent is provided. The manufacturer included a sample of floor detergent in the kit. In the future, you can choose the shampoo of your choice. Please note that the shampoo used by washing vacuum cleaners is not any liquid, but a special one with reduced foaming so as not to clog the internal components of the device.

By the way, picking up spilled liquids - one of the functions of a vacuum cleaner - is also very convenient. Now you do not have to run around the house in search of a rag.

Turbobrush copes well with cleaning carpets, upholstered furniture, mattresses. Intimidation of physicians by the harmful effect of saprophytes on health compels them to carry out such cleaning at least once a month. After all, no one will regularly shake, for example, a double mattress, this is troublesome even for a physically developed man.

Washing windows and mirrors will no longer require special effort and time. You don't need anything but water! For this procedure, the necessary nozzle is also provided. Water is evenly sprayed over the glass surface and is collected to the last drop, leaving no traces or streaks on the surface. Unfortunately, if you live in an apartment, and not in your own house, then you won’t be able to contrive and wash windows from the street with a vacuum cleaner.

Disadvantages: is it worth putting up?

The disadvantages inherent in all washing vacuum cleaners are most often called by consumers:

  • poor maneuverability, clumsiness, heavy weight;
  • high price;
  • the need to wash the container immediately after using the vacuum cleaner.

About Zelmer 919.0 st the reviews were similar. I want to note that these shortcomings can be challenged. With regard to rudeness and heavy weight, the vacuum cleaner is equipped with wheels, it rides on the floor just like any other, there is no need to carry it around. The set includes various nozzles that rotate in different directions, you can easily reach any hard-to-reach place in your house or apartment.

We can resolve the issue of a high price: if there is no urgency in the purchase and there is an opportunity to follow various promotions offered by household appliance stores, be sure to take advantage of such an offer. I bought my Zelmer 919.0 st vacuum cleaner, the price of which was quite high initially, in this way at an affordable price. The need to wash the container after each cleaning is more of a hygiene issue. After all, the garbage bag also needs to be shaken out after each use, otherwise what's the point in cleaning? At the same time, discipline will develop.

Having given preference to the Zelmer 919.0 st vacuum cleaner, you will forget about rags, mops, various detergents. For cleanliness in the house, apart from it, only water and electricity are needed. © site

Video - Zelmer 919.0st

");">

A washing vacuum cleaner is considered a universal device with which you can make dry and wet cleaning. So, it not only accumulates dust in the bag, but can perform wet cleaning and wash surfaces. Its functionality depends on the power and the availability of a variety of attachments. You will learn about the principle of operation and use of the vacuum cleaner below.

The principle of operation of the washing vacuum cleaner

The use of a washing vacuum cleaner allows you to clean without streaks and wash the surface well, which also quickly becomes dry. It guarantees this thanks to the principle of operation of the device:

  1. The washing vacuum cleaner has two capacities. One contains pure water, in the other - detergent. When you turn on the vacuum cleaner, the water is mixed with detergent.
  2. This solution begins to move along the hose and approaches the nozzle.
  3. Due to the pressure created through the sprayer, the solution begins to wet the contaminated surface, including dust.
  4. Water absorbs impurities that have been split under the pressure of the solution, and then through the tube it is again sucked into the vacuum cleaner and accumulates in another tank.

Complete with a vacuum cleaner, they must sell a hose, a bag, filters, nozzles and tubes.

To clearly see the principle of operation of the device, you can watch a video in which a simple do-it-yourself washing vacuum cleaner is assembled:

With the help of a washing vacuum cleaner, you can also dry clean the room. It will collect food debris on the floor, animal hair and fluff from birds, even pet waste products.

How to wash floors with a washing vacuum cleaner?

Washing goes like this:

  1. If there are debris on the surface, sweep the floor with a broom or use the dry dust attachment on a vacuum cleaner.
  2. Fill the vacuum cleaner with water and detergent.
  3. Start mopping the floor. If the vacuum cleaner is powerful, then the floor will be dry and shiny in a few minutes.

The washing vacuum cleaner first wets the floor surface, then picks up the contaminated liquid and places it in a special container.

Using a vacuum cleaner is best to clean surfaces covered with ceramic tiles or linoleum.

Is it possible to wash laminate with a washing vacuum cleaner

It is known that the floor with a laminate coating can not be wet, but the class of the laminate is of decisive importance. Some specimens are covered with a moisture-proof layer that repels liquids. Such a laminate has increased strength (32, 33 class). So, it can be washed with a washing vacuum cleaner, but 31 classes cannot!

If you still decide to do this procedure, it is desirable that the vacuum cleaner be of medium or high power, but not weak. During washing, the vacuum cleaner sprays a solution intended for wet cleaning of the floor, while the surface becomes wet. Only a powerful washing vacuum cleaner is able to dry the floor well after itself and prevent liquid from leaking into the cracks.

In order to wash the laminate with a washing vacuum cleaner, you must adhere to a number of recommendations:

  • Do wet cleaning no more than 2 times a week.
  • Do not use alkali as a detergent.
  • Do not use liquids with wax and silicone.
  • Do not allow liquids to enter the joints of the boards.
  • After a while, rub them with mastic for sealing.
  • Do not use brushes with coarse bristles.
  • Do not use steam treatment.

In order for the laminate to serve for a long time and have its original appearance, it is better to wipe it with a mop with a microfiber cloth, which wipes well and does not scratch the surface.

Is it possible to wash parquet with a washing vacuum cleaner

  • Washing is allowed only for parquet boards, well treated with a special impregnation and covered with a protective varnish.
  • The vacuum cleaner must be powerful, which does not particularly wet the floor and thoroughly, quickly absorb liquids from the surface.

How to clean carpets with a vacuum cleaner

To clean carpets with a washing vacuum cleaner, you need to prepare:

  • shampoo for wet cleaning of carpet surfaces;
  • clean water in order to pour into a special container located in the vacuum cleaner;
  • brush head;
  • vacuum cleaner with washing function.

Step-by-step instructions on how to wash the carpet with a washing vacuum cleaner:

  1. Clean the carpet with a regular vacuum cleaner, putting the vibra-brush attachment and remove all excess dust, sand from the street and dirt. This is done so that the filters of the washing vacuum cleaner are not clogged with large particles of dirt and accumulated dust.
  2. Before you start cleaning the carpet, you need to conduct a test to find out how the product will affect the carpet surface. This is especially important if you use a detergent that contains chlorine, as it can affect the brightness of the carpet or ruin the pile. For the test, it is necessary to wet the sponge in the product and wipe it in an inconspicuous place. If the pile does not undergo any changes, the color of the paint does not fade, which means that you can start washing the carpet.
  3. Fill the tank with water and add washing shampoo, in this case it is important to follow the instructions and avoid excess.
  4. Select the desired brush head. It is known that if the pile on the carpet is long, then a nozzle with long bristles on the brush is selected. When washing a carpet or carpet with a short pile, an appropriate brush head with shorter bristles is taken.
  5. Carry out cleaning, in which it is necessary to drive the nozzle up and down until the surface is completely cleaned. It is recommended to carry out processing in small areas for better cleaning.
  6. After wet cleaning the carpet, it must be dried with a vacuum cleaner. This will take quite a bit of time, but it will be possible to move around the carpet when the carpet is completely dry to the touch. This will take about 1.5-2 hours if the pile is short. With a long pile, drying will continue up to 3 hours.

Such a vacuum cleaner is indispensable if the house has long pile carpets, because it will perfectly clean them of accumulated dust, and the texture will remain unchanged.

How to clean windows with a vacuum cleaner?

To wash windows, you must have a multifunctional vacuum cleaner with the “window cleaning” option. It is desirable that there is a brush available that washes the glass. Cleaning is carried out according to the following instructions:

  1. Adjust the length of the tube on which the nozzle is attached so that it is possible to get dirt in hard-to-reach places.
  2. Set the water supply level to the "minimum" position, you can not use it - "maximum", otherwise, after washing, stains will remain.
  3. Start washing windows from the top and gradually go down lower and lower to avoid dirt, stacks and stains.

Such cleaning can be applied to all windows, except for those that have a rubber seal, as it may partially melt when heated.

What else can be washed with a washing vacuum cleaner?

With the help of a washing vacuum cleaner, you can remove stubborn stains on upholstered furniture. To do this, cleaning is carried out according to the instructions:

  1. The nozzle for washing is selected for the vacuum cleaner.
  2. A solution is prepared and poured into a barrel.
  3. Cleaning begins, and the nozzle is carried out from top to bottom. Under pressure, the cleaning agent is applied to the furniture. It dissolves the dirt, and the vacuum cleaner already sucks up all the dirt.
  4. Dirty water is poured out, the barrel is rinsed, clean water is poured without the addition of detergents.
  5. Furniture upholstery is being rinsed.

Upholstered furniture often has inaccessible places. To clean them, you need to use a crevice nozzle.

An example of cleaning a sofa with detergent is shown in the video:

Video: How to choose and use a washing vacuum cleaner?

How to choose a washing vacuum cleaner, the expert of the program “Everything will be kind” will tell:

The following video provides instructions on how to properly use a washing vacuum cleaner using the German THOMAS model as an example:

So, in the presence of a dwelling with a large area, a washing vacuum cleaner is simply an indispensable device. It will be a real help in cleaning and maintaining upholstered furniture and carpets in proper condition. Moreover, its operation does not require special skills, the main thing is to follow all the recommendations and the manufacturer's instructions.

In contact with

Loading...