Crochet roses from 69 air loops. Crochet Chinese roses - large and small

This elegant toaster cover in the shape of a basket with roses is very easy to knit.
True, you will have to work hard on a lot of flowers and leaves. But in this job you will hone your skills.
Later you can knit the same heating pad for a teapot or a lid for a bread box.

You will need:

- brown yarn for the basket,
- green yarn for leaves
- red-pink-yellow yarn for roses.

Operating procedure:

1. First, measure the item for which you will knit this “clothes”.
2. We will knit the basket with a “checkerboard” pattern, where the alternation of flat and convex columns forms a texture reminiscent of basket weaving (see photo).
A “flat stitch” is a double crochet, the hook is threaded from right to left in front of the leg of the previous row.
A “convex post” is also a double crochet, but the hook is threaded from right to left behind the leg of the post of the previous row.
3. From yarn red, pink and yellow color pattern (see photo) we knit roses.
To do this, we cast on a chain in which the number of loops must be a multiple of 4 and for lifting, cast on 3 more loops.
We fold the connected “paths” into roses.
4. Using green yarn, we knit leaves according to the pattern (see photo).
5. We fix the finished flowers and leaves on the “basket”.

I suggest you make a rose like this.

The size of the rose will depend on the number of air loops. I cast on 60 stitches

it turns out to be a kind of spiral

after we have tied the edges, we collect the resulting spiral into a bud, sewing the lower edges

Now let's start creating the cup. we knit it according to the pattern.

I knitted it a little differently: I made the leaves long and short, alternating them.

If you don't knit the last row, the sheet will turn out smaller.
Large leaf on the left, smaller on the right

Now let's start creating the stem. I used a regular wooden stick, previously cleaned. The knots don’t need to be cut off, then the leaves can be sewn onto them.

In the same vein, we tightly wrap the stem with threads

After the stem is ready, we sew the cup, having first placed it on the stem, but not quite deeply. this way the bud will hold on better.
Now carefully sew the bud to the cup, then sew on the leaves

the rose is ready

This is the kind of bouquet you can give. and not expensive and forever, such roses will delight the eye for a long time.

Crochet rose.

The crochet pattern in this post is simply gorgeous. Such an unusual and beautiful composition will surely decorate any interior, and will also bring a bit of individuality to the owners.

Today we will try to knit such a luxurious bouquet of white roses. Just like in a fairy tale! The size of the flower is 7 cm, and the size of the buds is 2.5 cm.

For work, take cream-colored yarn white, hook number 1, plastic stems and starch. Knit flowers as shown in detailed description: the pistil of a flower, a wreath of petals A B C and D, a bud and to it a pistil and a wreath of petals.

Be sure to starch the flowers and turn them outside. Next, place the flowers and buds on the stems and secure them well with the stamens. That's it, ready!

We wish you success. Your efforts will definitely be crowned with success and such a bouquet will decorate your interior very beautifully.

We crochet a beautiful voluminous Rose

Good day. Today I want to show you step by step crochet roses in pictures. The volume of the rosette depends on the number of loops cast on and, accordingly, the number of petals obtained, and the thickness of the yarn.

In my example, a rose is used as a decoration for a headband, also crocheted. But you can use it as a brooch, for decorating clothes, interiors, etc.

The whole process of crocheting a rose takes me about an hour (26 petals). But again, if the number of petals is less, then it will take a little time.

Step-by-step instructions for crocheting a rose

1. The rose will consist of 26 petals; for this we crochet a chain of 52 loops.

2. We knit the second row.

To do this, we knit 3 lifting loops, in the 4th loop - a double crochet, then a chain crochet, * a double crochet in the next loop, a chain crochet, a double crochet in the same loop, a chain loop.

Repeat until the end of the row from *.

Thus, we kind of get the letters V.

3. We knit 3 lifting loops.

Then - double crochet, 3 chain crochets, 2 double crochets in the same V arch. * In the next V arch - 2 double crochets, 3 chain crochets, 2 double crochets.

Repeat from * knit to the end of the row.

4. We finish crocheting our rose. To do this, 3 lifting loops, then in each double V arch we knit 10 double crochets, this way we get beautiful petals.

5. We twist the resulting ruffle as you like best and we get such a beautiful and voluminous rose. Personally, I plan to make such a rose as a brooch for a knitted black cardigan or vest.

As I already said, the more petals, the larger the volume of the flower itself.

I crocheted such a rose for a children's headband (for a 5-year-old girl). The bandage itself was made using a single crochet stitch. As you can see, everything is extremely simple.

I started knitting a rose with white thread and ended with red thread.

The back of the headband is shaped like a bow by evenly decreasing and adding stitches as you crochet.

This is the result you can get by spending a little time.

The pattern for the rosette was taken from a Chinese magazine. I only knitted the first two rows and then simply tied off the edge with a contrasting yarn.

For a long time I had a stem from an artificial rose lying around, the flower from which disappeared into oblivion (somewhere in the wilds of Olesya’s next school project). I decided to knit a rose and use this stem for its intended purpose.

Process. And the most important knitter

The rosette was knitted in a strip, then twisted and secured with a needle and thread and a glue gun. I used this diagram as a basis.

The rose and receptacle are knitted from floss threads.

I continue to crochet flowers. I want to make a panel out of them someday.
I'll show you today voluminous rosette. It looks very beautiful and is easy to knit.

We cast on 76 air loops, then knit according to pattern 1.

Then we twist the finished ribbon, giving it the shape of a rose, fasten it with a thread and a needle for strength, and that’s it - the rose is ready.

Vase with roses. You will need: knitting threads (red, white, green), “Iris” threads, bobbin threads No. 30 white, embroidery ribbon, sequins, hook No. 2.5; 1.5, PVA glue, wire for rose and gypsophila stems.

Buds. Knit the petals from the center with double crochets according to the pattern with red (white, pink, yellow) thread. A total of 7-9 petals, depending on the density of the knitting and the desired size of the rose bud. You can knit a rose with different shades. Then collect the rose petals (sewn together with a needle), starting with the darker ones and ending with the light ones.

Sema knitting.
Legend:
○ — air loop
+ - single crochet
| - short column
†—single crochet
╪— double crochet stitch

Leaf. Knit the leaves according to the pattern with green thread. The finished leaves can be unstarched or filled with strong-hold hairspray.

Cup. Tie five sepals with a green thread in single crochets according to the pattern: 3 ch; 1st row: 1 tbsp; 2-4th row: 2 tbsp.; 5-6th row: 3 tbsp.; 7th row: 4 tbsp; 8-9th row: 5 tbsp.; 10th row: 4 tbsp; 11th row: 3 tbsp; 12th row: 2 tbsp.; 13th row: 1 tbsp. At the end of each row, knit 1-2 chain stitches.
Connect the sepals in the last row of st. single crochet, at the same time adding one chain stitch between them, close it in a circle and knit 2-3 rows in single crochet in a circle.
Wrap the wire, pre-lubricated with glue, with green thread, while also wrapping rose leaves. Insert the stem into the sepal, securing it with PVA glue or a couple of hidden stitches in the color of the stem. Place the bud in the sepal with glue; you can also sew it on for strength. The rose is ready.

We collect a bouquet of roses. It can be decorated with a sprig of gypsophila and a lace package. To do this, knit any large napkin you like with a small hole for flowers from “Iris” threads, starch it and, having given it the desired shape, dry it until completely dry.

Gypsophila. Gypsophila can be made as follows. Tie 40-50 white flowers with thread No. 30 (40, 10). We cast on 5 chain loops and connect them in a circle, then go up * 5-6 ch, make a single crochet into a ring * and repeat this *action* 4 more times, break the thread. One gypsophila flower is ready. All that remains is to be patient and add 49 more. When all the flowers are ready, we collect them into a branch. To do this, take a thin wire and cut it 25-30 cm long. The number of wire pieces depends on the number of flowers. Then we stretch one end of the wire halfway through the center of the flower and twist the wire (something like beading). From ready-made branches (the length of the branches and the distances between them are arbitrary), assemble the required number of large branches, tightly twisting the ends of the wire together and placing the branches on a common trunk. I wrapped the stems and trunk with green spool threads. Gypsophila is a wonderful addition to bouquets of garden flowers. Several branches can advantageously emphasize the beauty of a composition of one flower and give the necessary shape and volume to the bouquet. All that remains is to put the bouquet in the vase.

Any bouquet of flowers in your home will always give you a good and festive mood.

Motif scheme

…

a chain of the required number of chain loops (the longer the length of the chain, the more magnificent the rose) and starting from the 5th loop from the hook, knit according to the given pattern.

Calyx. Fold the green thread into a ring and knit from the resulting ring an air loop for lifting, 7 single crochets, a connecting stitch into the second loop for lifting. Pull the end of the thread tightly and continue working according to the diagram below.

For decorating products self made Many craftswomen use crochet roses. Many of them come up with designs for such decorations on their own. Beginning needlewomen have to look for simple options that they can easily handle.

Varieties of roses

Before we take a closer look at crocheting roses with patterns, let’s first figure out what they are. The simplest are ordinary flat flowers, which often serve as the basis for round or square motifs. These products are often used as appliques or elements of Irish lace.

Much more popular voluminous roses with several layers of petals. It’s not easy to figure out how to knit them the first time. But, having mastered the main principles, you can begin to improvise and create your own “varieties” of these colors.

Roses are also used as patterns. This is most typical for fillet knitting. This technique has the most scope for recreating complex and detailed designs. The knitting pattern and description of which are available in the collections of many craftswomen can be mastered in a couple of hours.

Snow-white volumetric rose

Based on a simple flower, you can knit a beautiful three-dimensional decorative detail. It consists of several layers.

The first stage of work is to knit a simple flower. We knit a self-tightening ring from 2 single crochets. In the second row we make 6 arches from air loops. Their number can be arbitrary, but you should not do more than 5, so as not to greatly stretch the flower.

On the arches we form the petals themselves with and without. Approximate pattern: 1 single crochet, 2 double crochets, 1 double crochet, 1 single crochet. As you noticed, the petal is made symmetrically. You can experiment with the number of stitches and crochets yourself. But the more you place on one arch, the more voluminous the petal itself will be. This initial rose will be created in the following steps.

When the first row of petals is ready, we do not break the thread, but on the wrong side we make 6 more arches from air loops so that they reach approximately the middle of the front row. We form the petals according to the same principle, but we make a little more columns, since the number of air loops has increased. In this way you can make up to 5 tiers. It won't be very nice anymore.

Square motif

In this way, not only flowers for applique are created, but also bases for various motifs. This is the joy that crocheting roses gives. Schemes of such motifs were used by our grandmothers when

When the main flower is ready, it is tied with green yarn along the lower tier. For this, simple arches made of air loops are used. Imitations of leaves are made on four sides of the flower using lush columns or columns with a common top. It is advisable to make the next row with yarn of the third color, which will become the background. Double crochets are made in this row. In the corners where the leaves are located, the canvas expands due to an arch of air loops.

An excellent basis for a blanket or scarf - these voluminous crocheted roses. Patterns, knitting and assembling the finished product do not require special skills from the craftswoman.

Another version of the square motif

Square motifs quite often use crochet roses as a base. The scheme of work in them is always approximately the same. First, a ready-made flower is made, and then leaves and the main background are attached to it, which turns into a square.

In the version presented here, the transition to a square shape is achieved using a simple mesh of air loops. This technique helps to maintain a square shape: in the corners the workpieces are knitted not in one arch, but in two, as if placing the hook twice under one base.

The leaves in this pattern are made separately and then sewn on. An example of a leaf could be as follows: we knit a chain of air loops and form 3 loops from it. Then we tie them with a single crochet in such a way as to capture the far edge of the loop and hide the resulting hole.

Ribbon rose

Let's consider another option that suggests crocheting roses. The patterns of petals and leaves are extremely simple and understandable. It is knitted in one row. The essence of this whole method is that the end result is a ribbon that folds and forms the flower itself.

We cast on an arbitrary number of air loops. We knit the first petal from two double crochets and two chains of air loops along the edges. Then we make one half-column and again dial a chain of 3 v/p. We make 2 more double crochets.

The third petal should be larger. Therefore, we increase the number of yarn overs and the stitches themselves. Consequently, the number of air loops in the chain will also increase.

Using this algorithm we knit an arbitrary number of petals. But it is worth remembering that too few of them will not produce a beautiful bud, and too many will not form well into the finished flower.

Rolling a rose

When all the petals in the ribbon are ready, the first stage is completed, representing crocheting a rose. We will look at leaf patterns at the last stage. Now let's start forming the flower.

To do this, we begin to twist the ribbon from the smaller petal to the larger one. At the same time, try not just to twist it into a tube, but to form a bud. To prevent the “roll” from falling apart, periodically stitch the bottom of the petals.

When the rose is assembled, sew the lower part thoroughly using the same yarn from which the flower is made.

Now you can start working on the leaves. They are knitted extremely simply: we make single crochets at the base and at the tip, add a few double crochets to the middle, but not many, so as not to end up with a bloated barrel. We either sew the finished leaves onto the rose or first sew them onto the product, and attach the flower at the top.

Roses in checks

The richest in patterns and pictures is fillet crochet. Rose patterns in this technique are the most common.

You can write more than one article about how to knit fillet flowers. Therefore, let us remember only the main principles of technology. The patterns in it are built on the basis of “painting over” empty cells, as if drawing in a notebook.

The basis of the patterns is a double crochet, two chain loops and a double crochet for empty cells and four double crochets for filled ones.

Rose diagrams are very simple to make: they can be copied from the finished product into the same notebook in a box. The example shown in the photo is a classic version of this pattern.

Knitted flowers can act as a decoration for clothing, for example, as a brooch, or be part of a product. Don't know how to crochet a rose? This is not difficult even for beginner craftswomen. With ours step by step instructions and patterns you will learn how to knit flowers using different techniques, different sizes and types. All you need is yarn, a hook, a little time and patience.

We have prepared a description of 3 different ways of knitting flowers of varying complexity. Each of these descriptions can be regarded as a master class for beginner knitters who know how to knit chain stitches, double and single crochet stitches, and connecting stitches.

Simple crochet roses

This is an easy way to knit a rose especially for beginners. The flower is made in one piece and then stitched together. First you need to tie something similar to an openwork ribbon, and then assemble it in the shape of a flower.

First you need to cast on 33 air loops (v.p.);
In the first row we knit a double crochet from the 5th loop from the hook. *Then insert the hook through one loop from the first stitch and knit a st from it. with double crochet (s/n), 1 ch, st. s/n*. Repeat between stars until the end of the row;
4 ch, *1 st. s/n, art. s/n, 1 v.p., 1 tbsp. s/n from the same loop. 1 tbsp. s/n, 1 v.p., 1 tbsp. s/n from the same loop*. Continue to the end of the row from * to *;
2 ch, single crochet (st b/n), * 8 tbsp. s/n on 6 loops of the previous row, 2 tbsp, inserting the hook under the jumper*. We repeat from * to *.

Braid knitting pattern

Symbols on the diagram:

o - air item;
T - st. double crochet;
+ - art. without crochet

This completes the crocheting of a rose. We ended up with something similar to braid, which now needs to be assembled into a rose. To do this, take a needle and thread, twist the braid in a spiral and secure with the needle. Our flower is ready. Now it can be sewn onto a hat or, by attaching a pin to it, used as a brooch.

Tip for beginners: crocheting roses is best done using smooth and plain-dyed yarn. Mohair or grass will add additional volume, and the rose will not look so impressive. And section-dyed yarn will make the flower too variegated.

Another way to crochet a rose

To make such a rose, you first need to knit the petals separately, and then put them all together in any order. The number of petals depends on the size of the rose, but on average it is 15-20 pieces. The petals are knitted in double crochets.

We perform 4 air loops. Crochet 3 tbsp. with 2 yarn overs from the first loop;
We make a lift from 3 air. loops (in the future we start each row with this), one stitch, and then knit 2 stitches from each loop;
3 tbsp., 2 times 2 tbsp. from 1 loop, again 3 tbsp;
4 tbsp, 4 times 2 tbsp from 1 base, 4 tbsp;
4 tbsp, 2 tbsp. from 1 loop, 6 tbsp., 2 tbsp. from 1 loop, 4 tbsp;
We knit in stitches from each loop. We repeat this row again;
We skip 1 loop, knit in stitches to the end of the row, the last 2 sts. knit with one top;
2 times we knit 2 stitches with one top, 3 tbsp., one st. with one crochet, 2 tbsp. b/n, 1 tbsp. with one crochet, 3 stitches, 2 times 2 tbsp. with one top.

Rose petals can be the same color or different. Once they are all connected, collect them into a flower and fasten them together. Start picking from the center, twisting the inner petals into a bud shape. Spread the outer petals.

If you have no one to take a master class on knitting a flower for beginners, our detailed instructions and diagrams will help you cope with this task. Just be careful and act as described.

Circular crochet roses

In this method, the rose is knitted in the round. This means that nothing needs to be sewn together. At the end of knitting you will have a finished flower.

We start knitting by casting on 5 chain stitches and joining them in a circle. Next we proceed according to the scheme:

In the first row we knit 7 tbsp. B/n, connect them, make 2 air loops;
In the second row, first knit 1 tbsp. B/n, then from each loop - 2 tbsp. b/n to the end of the row, connect the columns;
3rd row. 4 ch, 1 dc in the second loop of the previous row, 3 ch, 1 dc in the fourth loop. We continue to the end of the row, knitting the columns by inserting the hook into the even loops of the 2nd row. We finish the 3rd ch, connect them with the ch we started with;
4th row. We continue crocheting roses. On three chs of the previous tier we knit: st b/n, st s/n, st. With 2 double crochets, st s/n, st. B/n. Repeat until the end of the row. This is how the first petals of the future rose appear;
5th row. On the first 3 loops we knit connecting posts. So we “get” to the top of the petal and start the fifth row from here: ch 3, dc on a double crochet stitch, repeat to the end, join;
6th row. St b/n, st s/n, 3 st with 2 double crochets, st s/n, st b/n. In this sequence we knit the petal further. The result is a second row of petals;
7th row. Using connecting posts we again reach the top of the petal of the previous tier. On the middle double crochet stitch, make a double crochet stitch, ch 5, and so on;
8 row. Inserting the hook into the arch of air loops, we knit: st b/n, st s/n, 5 sts with 2 double crochets, st s/n, st b/n. We continue in the same way until the end of the row. This is how we got the third row of rose petals.

Using this principle, you can knit as many tiers of petals as needed.

The rose is ready.

If you are looking for information on how to crochet a rose with a step-by-step description, use our instructions or find a video on the topic.

It is better to crochet roses using medium-thick yarn. If you use one that is too thin, the flowers will not hold their shape well. Yarn that is too thick will make the roses look shapeless.

The composition of the yarn also matters. Viscose or silk is quite heavy. A crocheted rose may turn out too soft and shapeless. It is best to knit flowers from cotton, linen, or a mixture of wool and acrylic.

Where to use crocheted roses? As a rule, they are used to decorate hats, jackets, bags, and make spectacular brooches. Sofa cushions completely strewn with knitted flowers look very original.

Good afternoon, today I will tell you what ways there are to crochet a rose. You will see how simple it really is - even for beginners, and even for children in their first year of learning to crochet. All flowers are knitted very simply. In the article you can find many patterns for knitted flowers. And in this article there will be patterns and lessons for crocheting a rose - in bud or in bloom. All techniques and methods will immediately become clear to you and easy to perform.

So let's get started.

How to crochet a rose.

STRAIGHT LACE method.

These are the roses we will now knit. And this work is suitable for the most beginner crochet masters - for children of elementary age. school age. That is, the master class is suitable for leaders of children’s clubs “Skillful Hands”.

It is enough to learn how to knit a chain of double crochets, master a single crochet and a double crochet.

You can decorate a greeting card with these crocheted roses. Nice craft on mother's holiday on March 8th. Or decorate your hair tie with a rose. Or crochet a gift basket, starch it and decorate it with a rose, as in the photo below.

Your knitted lace ribbon doesn't have to be straight– it can twist itself into a spiral, or a circle. So even better.

This will happen by itself if in the second row (the row that immediately goes on top of the chain stitches) you knit more than one stitch into one chain stitch. Either there are 2 columns in each air, or 2 columns through 1 air, or through 2 airs. The more often you make an extra stitch, the more your lace curls.. And then the crochet rose will be easier to twist into a flower.

You can knit a simple openwork strip with holes: 1 stitch + 1 stitch, 1 stitch + 1 stitch, etc. This row itself will be straight in shape. But he begins to twist into a spiral when the next in the third row, in each hole of the openwork we will knit many double crochets (in this case, 6 double crochets in each arch - along the edges with one crochet, and 4 central ones with double crochets)

And if you make it in such lace more rows up- and as a result you get a wide strip of lace, you can fold more curvy crochet roses, as in the photo below. Additional rows will give the rose depth to its petals. You can place such a crocheted rose on a strong wire leg, tie green oval leaves on it and assemble a beautiful crocheted bouquet for a vase.

The essence of the whole work is simple - we knit a wide ribbon of lace with an edge in the form of rounded arcs. And then we twist this lace into a roll. It turns out to be a rose. The green part can be immediately included in the ribbon knitting pattern. That is, start knitting a green ribbon and only then continue with red threads.

You must understand one thing. Knitting pattern for this lace can be arbitrary. YOU can take this diagram - how piece from the pattern of any round napkin. Take a round knitting pattern and erase the extra rows there - what remains can serve as a rose pattern.

This is a piece of a regular napkin pattern. But if we tie it like a ribbon. And let’s roll it up and we’ll get a crochet rose.

Here in the photo below is a rose and a diagram – also similar to part of a napkin diagram.

And even a straight (not round) lace pattern can become a rose if it is rolled up. The main thing is that this straight lace has a WAVY EDGE. So that when rolled into a roll, these semicircular edges look like petals.

In the photo and diagram below we just see a crocheted rose, crocheted from a straight ribbon of wide lace.

Rose with petals of different widths.

You can also make each petal arch on your lace ribbon a LITTLE BIGGER than the previous one. Then your edge petals of the rose will be larger and wider than the central inner petals of the bud.

Here's how it was done on the rose in the photo below. And this principle is also visible in the diagram. The petals contain more and more columns.

Crochet rose on green shamrock.

Below we see small roses lying on green leaves. The rose itself is knitted simply (diagram below).

Green shamrock is also quite easy to knit. First, we knit a chain of 7 loops, one for lifting, and along this chain we return back with connecting posts. And now, having returned, we make another chain of 7 balloons and again turn around from its tip and follow it back with a series of connecting posts (crosses in the diagram). And having returned, we make another, third, chain of 7 balloons - and we also return along it with a row of connecting posts. And then we tie each of the three sticks with columns with one and two crochets (as shown in the diagram). When all three leaves are knitted, you can decorate them - add a cord of cloves (red row in the diagram below).

Of course, nothing prevents us from tying the leaves each separately, and then collecting them into a trefoil. And the layout of the leaf can be completely different.

For example, this one. Everything is to your taste and design. And here is a diagram of a beautiful leaf with a serrated edge for a crochet rose.

And you can do something even more interesting. You can knit a trefoil (or multifoil, it doesn’t matter) directly on the same chain on which we knitted the petal twist. As we can see in the photo below.

A rose made using this technique can become an applique decoration for a child’s knitted hat (as in the photo below).

Petal method

Crochet a rose.

But these roses are made from individual round petals. Look carefully, you can clearly see it in the photo.

Below you see a crocheted rose made from round petals. Just like a living rose in nature. To twist such a rose you need to tie several round petals. It is desirable that the petals be two or three different shades of red. This way the rose will turn out dark in the middle of the bud and gradually lighten towards its edges - and look like natural.

Below is a diagram where we see how each petal of such a rose is created by crochet. There is also a diagram of the sepals (pentagonal diagram in the picture below). And how the leaf is knitted.

There is also a knitting and folding pattern for a rolled bud - an asymmetrical circle in the lower left corner of the picture below.

You can make large sized roses using this round petal technique. The petals can be curved at the edges or straight, the buds can be closed or lush, depending on how you wrap the rose flower.

If you decrease the stitches in the row on the last rows of the circle. Then the edges of such round petals will begin to wrap themselves. And we will get round, even folds on each rose petal. As in the photo below.

You can also make your own design additions to this rose knitting technique. For example use threads of two or three colors in (as in the left photo below), where border Each petal is tied first with columns of pink thread, and then in another circle with columns of red thread.

And also (as in the right photo below) you can add in the middle of each round petal - sharp notch. This shape of petals is found on some varieties of roses. Why not crochet it.

These are the recommendations I can give for creating a crochet rose. All methods and all patterns for knitting roses fit into just 2 techniques. Either it is long lace, which was then twisted into a rose, or it is round petals, which were then collected into a rose. The sepals and green leaves can be knitted different ways and diagrams. Everything is your choice.

Choose the technique that is closest to you and create your own crochet rose.

Good luck with your work.

Olga Klishevskaya, especially for the site.

Crocheted flowers are one of the favorite themes of needlewomen, because with the help of such a decorative element you can transform many things, from clothes to interior items. The crocheted rose is the queen of flowers not only in nature, but also in crocheted needlework. There are simply an incredible number of variations in crocheting roses; perhaps this majestic flower has won the heart of more than one noble craftswoman!

A knitted rose is a flower that will always smell fragrant and never fade, which is why it is good as decoration for hats, scarves, blouses and even bags. Moreover, they use crocheted roses on their own - as exquisite women's brooches, bright children's hair clips, what can we say - they create luxurious necklaces and bracelets from roses.

Knitting roses is accessible even to beginners who have just learned to crochet. In order to start making a decorative rose, you can use any available yarn (iris, cotton, acrylic, linen, wool, bamboo), as well as a hook suitable in size to the thickness of the thread. Depending on the choice of yarn colors, roses can be made bright, or, conversely, pastel, or even experiment with combining colors.

As for the methods of crocheting roses, there are only two of them:

knitting a long lace strip, which is later twisted into a rose;
knitting individual elements of a rose (center, petals, cups, buds), assembled into a flower using a needle.

The choice of knitting always remains with the craftswoman. Try crocheting your first flower, and we guarantee you will be surprised what elegant and very realistic roses you can crochet with your own hands.

We have prepared two step-by-step lessons on crocheting roses in both techniques (with the whole fabric and by elements).

A simple master class on knitting a rose in one openwork strip

Despite the fact that knitting a whole flower is considered easier compared to making roses piece by piece, the end result pleases the needlewomen no less - the rose turns out so lush, you can’t take your eyes off it!

To make such a rose you need:

viscose yarn of two contrasting colors of medium thickness (we have deep purple and soft lilac);
hook No. 2;
thread and needle, scissors.

Knitting pattern:

Explanation of abbreviations found in the text:

VP – air loop;
runway – lift runway;
RLS or art. b/n – single crochet;
CCH or art. s/n – double crochet;
С2Н – st. with 2 yarn overs;
PS – half-column;
PR – previous row;
SS – connection column.

Description of work:

We collect the base chain for 48 VP.

Row No. 1: count 5 VPs from the hook, insert a hook into the sixth, knitting 1 Dc.

We knit another VP.

On the base chain we skip 2 VPs, in the third we knit: 1 SSN + 2 VP + 1 SSN.

We continue to knit with rapports until the end of the row: 1 VP + skipping two VPs of the base chain + in the third VP: 1 Dc + 2 VP + 1 Dc.

Row No. 2: raise 3 runways as the end of the first row.

We turn the knitting over, knit 1 DC into an arch of 2 VP PR.

Then we knit 2 VP + 2 DC in the same arch.

We continue to knit a row with repeating combinations: 1 VP, next. arch of 2 VP PR we knit 2 Dc + 2 Ch + 2 Dc. Repeat until the end of the row.

On the last two loops of the second row, it is necessary to attach a lilac thread.

Row No. 3: raise 3 runways.

Knitting revolution - we knit 3 DC into an arch of 2 VP PR.

Then we knit 1 SS into the arch from the 1st VP PR.

Next we already knit the arch 8 DC + 1 SS into the arch from the 1st VP PR. Repeat the rapport 3 more times, in total you should get 4 fans of 8 tbsp. s/n.

In the next arch we knit 10 DC + 1 SS into the arch from the 1st VP PR. We repeat 5 such rapports, a total of 6 fans for 10 columns of s/n. SS. We cut the thread. The openwork strip for the rose is ready.

We roll it in a spiral.

From the inside out we sew a needle through all the layers of the flower to securely fix its shape.

The rose is ready!

Keep in mind that the side of the strip (front or back) matters in the direction of the spiral folding - depending on the chosen side, the rose petals can be either concave inside the flower or, conversely, convex, more open.

The final stage is decorating the rose. You can tie a green leaf to it, you can decorate it with glass beads or rhinestones, here everything depends only on your imagination. A ready-made rose of this type can be used to decorate any items from a wardrobe (especially children’s!), as well as to decorate interior items in an original way (vases, paintings, photo frames, etc.).

Knitting a voluminous rose from individual elements: a step-by-step lesson for advanced knitters

These crocheted voluminous roses are truly stunning - they can really be easily mistaken for real flowers! True, you need to spend a lot of time making them, but all your efforts will pay off with interest - such hand-made products are highly valued!

Let's take a closer look:

A voluminous rose is knitted from individual elements: a center, three inner and outer petals, a calyx and three to six green leaves. So, let's start knitting the components of the flower.

Center of a rose

Schematic drawing

Knitting:

We collect a chain of 10 VPs, close them into a ring using SS.
Row No. 1: 2 VP + 15 DC in the middle of the circle from the base, 1 SS.
Row No. 2: 2 VP + 2 DC in each PR loop, 1 SS.
Rows No. 3-4: 2 VP + 1st DC in each PR loop, 1 SS.
Row No. 5: 2 VP + 1st DC in every 2nd PR loop, 1 SS.
Row No. 6: 1 VP + 1 RLS in each PR loop, 1 SS.
Row No. 7: 1 VP + 1 RLS in each PR loop, 1 SS.
Row No. 8: 1 VP + 1 RLS, then we knit with rapports: 4 RLS in one loop + 1 RLS, ending with a SS.

In addition to the center, we knit a bud; it is necessary so that the center of the rose does not show through and the filler is not visible through it.

We collect a chain of 21 VPs

Row No. 1: we skip two VP chains, with the 3rd we knit 19 RLS.
Row No. 2: 2 VP + 1 dc + 2 dc + 1 dc + 1 dc + 1 dc + 3 dc + 1 dc + 1 dc + 1 dc + 6 dc + 1 dc + 1 dc. Inner rose petal (3 pcs. )

Scheme:

We collect a chain of 9 VPs. We knit in turning rows.
Row No. 1: count two VP chains, starting from the 3rd we knit 7 sc to the end of the row.
Row No. 2: in the 1st loop of the row we knit 2 VP + 1 Dc, in each subsequent loop – 2 Dc until the end of the row.
Row No. 3: 2 VP, then – 7 rapports: 2 Dc in one loop + 1 Dc in the next loop, the last loop – 2 Dc.
Row No. 4: 2 VP, 1 dc in each loop to the end of the row.
Row No. 5: 2 VP + 3 Dc, 4 repeats: skipping one loop + knitting 4 Dcs.
Row No. 6: 2 VP + 3 Dc, 4 repeats: skipping one loop + knitting 3 Dcs.
Row No. 7: 2 VP + 1st DC in each PR loop.
Row No. 8: 1 VP, 6 repeats: 2 Dc in one loop, then 2 RLS, 6 repeats: 2 Dc in one loop. SS. We cut the thread.

Outer petal (3 pcs.)

Scheme:

Knit the initial chain and the first 7 rows in the same way as knitting the inner petal.
Row No. 8: turn the work, raise 1 VP, 2 Dc in one loop, knit rapport three times (2 C2H in one loop), then knit 2 Dc in one loop, 2 double crochets in one loop, 2 RLS, 2 PS with a double crochet in one loop, 2 dc in one loop, then knit rapport three times again (2 dc in one loop), finishing with 2 dc in one loop and sl st.

Calyx (green yarn)

Scheme:

We knit a chain of 7 VPs, close it in a circle with the help of a SS, knit in a circle.
Row No. 1: 1 VP + 9 PS with double crochet in the middle of the circle. SS.
Row No. 2: 1 VP, 4 repeats (2 PS s/n in one loop + 1 PS s/n), 2 PS s/n in one loop. SS.
Row No. 3: 5 repeats (8 VP, starting from the 3rd loop from the hook we knit: 3 RLS + 3 PS s/n + 3 SS).

Leaf (6 pieces).

Scheme:

We collect a chain of 14 VPs.
Row No. 1: in the 3rd loop – 1 RLS, then we knit 2 PS s/n, 6 SSN, 1 PS s/n, 2 RLS.
Row No. 2: turn the knitting, knit 1 VP + 1 sc + 2 dc in the 1st loop + 2 dc in one loop + 1 dc + 2 dc in the 1st loop + 2 dc + 2 dc in the 1st loop + 1 sc + 2 dc + 1 sc in the penultimate stitch.
Row No. 3: knit in the round: 2 dc + 1 sc + 2 dc in 1st loop + 2 dc + 2 dc in 1st loop + 1 dc + 2 dc in 1st loop + 2 dc in 1st loop loop + 1 sc + 1 ss.
Row No. 4: turn the work, knit 1 VP + 1 RLS + 2 PS s/n in 1st loop + 2 Dcs in 1st loop + 2 Dcs in 1st loop + 2 Dcs + 2 Dcs in 1st loop loop + 1 PS s/n + 2 PS s/n in 1 loop + 6 RLS + 1 VP + 1 PS s/n.
Row No. 5 we knit circularly: 1 VP + 6 RLS + 2 PS s/n in the 1st loop + 2 Dcs + 2 Dcs in the 1st loop + 2 PS s/n in the 1st loop + 2 PS s/n in the 1st loop Well, a loop + 1 sc + 2 ss.

Tie the leaves in a circle in a “crawfish step”, stretch a thin wire along the edge so that the leaf holds its shape. We collect three leaves per branch.

Assembly

Once all the elements of the rose are ready, we begin assembling the flower. As a trunk, you can use a cable or thick wire covered with masking tape. We fill the knitted center of the rose with filler, attach the inner petals to it overlapping, followed by the outer ones. We put the middle on the trunk, attach a bud inside it, then the middle, sew a cup under it. We wrap the trunk with green thread, tying the leaves in parallel at the desired height and distance. The rose is ready! You can make a rich bouquet from these roses and decorate your favorite vase with them. They are also good as an original gift for mom or a close friend.

Video tutorials on crocheting roses

Roses are very popular in crocheted needlework, therefore, for greater clarity, we suggest that you familiarize yourself with detailed video tutorials on crocheting them. Get inspired and improvise!