How to speed up a windows 7 computer program. Game Boosting or how to speed up your PC games

A new powerful computer pleases users with its performance, but over time, its speed is steadily declining. In this case, many have a reasonable question, how to speed up a Windows 7 computer, but at the same time not spoil anything in the system.

Considering the question of how to configure Windows 7, we have already touched on the problem of using various programs and archives with settings. It was about tweaks - small tricks that help increase system performance. However, you can do without third-party software.

You can really affect the speed of a PC or laptop using the usual system optimization.

Many Windows features are not in demand among ordinary users, so they can be safely disabled, increasing the performance of the machine.

Disabling visual effects

The beautiful interface of Windows 7 is a great advantage and at the same time a serious disadvantage when it comes to optimizing your computer.

Various visual effects place high demands on the hardware, slowing down the execution of some more important processes.

If you have a low-power laptop or a computer with old hardware, then performance drops with visual effects enabled cannot be avoided. To fix this flaw in Windows 7, you can use the built-in tools and remove all unnecessary "chips".

To bring the interface back to normal, you must leave the four effects marked in the screenshot turned on. After that, click the "Apply" button and restart your computer for the new configuration to take effect.

HDD Optimization

Recorded on HDD files are divided into fragments that are scattered over the entire surface of the media. This was done primarily for the rational use of free space, but as a result it often turns out that when the user accesses a specific file, the computer is forced to collect fragments scattered over the entire surface of the disk.

A huge number of fragments of already unnecessary (or deleted) files are also added here. The result is a decrease in the performance of the hard drive and, as a result, the system as a whole. There are two ways to fix this problem:

• Periodic cleaning of the disk from temporary and simply unnecessary files.
• Defragmentation of the hard drive.

Remove from the computer all unnecessary files and programs that take up a lot of space, but are not used for their intended purpose. Leave only the essentials that you can't do without.

To delete temporary files:

After cleaning the system of debris and uninstalling unnecessary programs, you can proceed to disk defragmentation, which is performed by standard Windows tools:

Hard disk optimization is one of the most effective ways increase the speed of the computer. This will be especially noticeable if you have not defragmented for a long time and have not destroyed "computer junk" for a long time.

Increasing the paging file

Flaw random access memory and the inability to install an additional bar often leads to the fact that users cannot qualitatively improve the performance of the machine and are forced to put up with a low system speed.

You can increase the paging file using a USB drive and the ReadyBoost technology built into Windows.

As a drive, you can use a regular flash drive or SDHC / SD / MS memory card. Even a regular smartphone or any other device with built-in memory that meets the following requirements will do:

• Support for USB0/3.0 technology.
• Availability of free space (minimum 64 MB, but usually more than 200 MB is required).

There are still some restrictions on the data transfer rate, but they are quite democratic: any modern drive has much better characteristics than you need for ReadyBoost technology to work.

If you want to provide all free space for the paging file, select the "Give for ReadyBoost" option.

Startup cleaning

Even on powerful new computers, after some time after the start of continuous operation, the user notices a decrease in startup speed operating system. This is primarily due to big amount extra programs in autorun that are added there without the knowledge of the owner of the machine.

Various messengers, applications for automatic updates, agents social networks and other similar programs during installation must be registered at startup and run along with the system, taking up resources.

Most The best decision- remove all applications from startup, except for those vital for the system. The latter include antivirus with its services and system utilities. You can clean autoload using CCleaner:

If there is no CCleaner utility, then use the standard tools:

In Windows 8 and 8.1, this operation can be performed from the Startup tab in the Task Manager.

Checking the registry and RAM

The tails left after the removal of programs in the registry negatively affect the performance of the system, which leads to a decrease in the speed of the computer. The solution is simple - periodically cleaning the registry using the CCleaner utility already mentioned above.

If you have never cleaned the registry, then after the first “cleaning” you may notice a serious acceleration of the system.

Do not forget about the RAM, which may also have various failures that affect the final performance. To check the RAM, use the built-in tool "Diagnostics of computer RAM problems".

Choose the first option, which means reboot and check. Don't forget to close all programs.

The scan can be quite long, so do not schedule any tasks related to the computer during it - it is not recommended to interrupt the diagnostics, as this can lead to serious errors.

Power Options

The minimum number of users remembers to adjust the power settings, although this is one of the important components of adjusting computer performance. Typically, the power management scheme has three modes:

• Maximum savings - minimum productivity.
• Balanced energy consumption.
• Maximum energy consumption - maximum performance.

Switching the power mode is especially important for laptop owners. By default, the system is set to balanced mode, but as soon as the battery runs out, power saving mode is automatically activated, which reduces performance.

When you turn on the laptop to the network for charging, the economy mode does not switch, although there is no need for it anymore. On such trifles, users lose moments, which then add up to a noticeable slowdown of the computer.

If you are working on a computer or laptop that is constantly connected to the network, then be sure to configure the power scheme:

If necessary, you can adjust the scheme for yourself by clicking on the link “Setting up a power plan”. On the "Advanced Options" tab, you can set your own values.

Enable all processor cores

It is now almost impossible to find a working computer that has only one core; modern machines have 2 or more cores available.

Usually, the operating system automatically checks the type of processor installed, but it often happens that only one core is used at boot.

You can fix this deficiency on your own:

Now, when starting the operating system, all processor cores will be used, which will significantly speed up loading.

Another helpful advice, allowing you to seriously increase the speed of your computer - replace the thermal paste on the processor.

Due to the dried substance between the processor and the cooler, machines even with the most powerful configuration begin to slow down, so do not be lazy at least once every 2 years. A more accurate replacement time can be determined by measuring the temperature of the processor - if the value significantly exceeds the norm (about 65 degrees), urgently remove the cooler, clean off the old paste and apply a new substance in an even layer.

The Windows 7 operating system can run much faster and more efficiently, but certain steps must be taken to achieve this. The main measures in terms of optimization should be considered.

Disabling visual effects

It is expected to have a very attractive design. If you want to speed up the system, you need to understand that visual effects require extra resources. It is required to follow the specified path: Start -> Control Panel -> System -> Advanced system settings.

When the settings window opens in front of us, the following actions are carried out: Advanced -> Performance -> Options

In the design, the developers tried to simplify the optimization task as much as possible. You just need to select the item "Ensure the best performance" and the settings will be set automatically. This greatly simplifies the task. The result will be a classic look. All this is shown in the screenshot below.

Not always new appearance may suit and it requires some additional steps. You may well choose any suitable option from the available list, taking into account the speed requirements of the OS. You should right-click on any free area of ​​\u200b\u200bthe desktop and click "Personalize".

Aero Glass mode can be accelerated by turning off transparency. This provides that the translucency effect will disappear. All in the same personalization section, you need to select the "Window Color" item, where you uncheck the "Enable transparency" box.

For powerful devices, this will not give any noticeable increase, but in the case of a weak video card, it can provide a visible result.

Disabling unused components

During the operation of the OS, one has to deal with a situation where a large number of services. The difficulty lies in the fact that not all of them provide for efficiency. It is for this reason that it is important to pay attention to this factor during optimization. Disabling certain components will not harm the OS.

We follow the suggested path: Start -> Control Panel -> Programs and Features -> Turn Windows features on or off. A window with the content shown in the screenshot will be displayed.

We look through the list of issued components and uncheck those that we do not use. For more information, hover your mouse over the element of interest.

During the shutdown of certain components, a system message of the following type will be displayed on the screen:

We confirm and continue optimization measures. It is necessary to list what exactly can be safely turned off:

• Default browser IE if you use other programs to access the Internet
• Telnet server
• Built-in search engine, when it is not needed
• Telnet and TFTP Clients
• Components of a tablet personal computer, since the setup is for a laptop or a stationary device
• OS gadget system when there is no desire to use this feature
• Unix Program Subsystem
• Microsoft Message Queuing Server
• Operating System Activation Service
• Print service when the printer is not connected to the device

For all changes to take effect, you must restart the operating system.

Boot optimization for computers with multi-core processors

If you are using a multi-core processor, there are some steps you can take to speed up the entire OS. In most cases, Windows itself can determine such a moment, but checking is never superfluous. It is required to enter msconfig through the "Run" window.

Now you should go: Download -> Advanced Options

In the window that appears, the number of processors, as well as the amount of memory, are indicated. It is necessary to make changes only when the parameters do not match the real ones.

If the adjustments are set, then a reboot occurs to start their action.

Repairing the Quick Launch

If you are used to older operating systems, you may experience the inconvenience of missing the quick launch bar. In order to return, you need to following list actions:

1. Right click on the "Toolbar" icon
2. Panels -> Create Toolbar
3. A field opens where you need to register new way
4. %appdata%\Microsoft\ Internet Explorer\Quick Launch

When you click "Select Folder", you can see the Quick Launch. To return to the usual place, you need to click the left mouse button and then move to the "Start" button. You should right-click on the "Quick Launch Panel", where the checkboxes "Show captions" and "Show title" should be unchecked.

After all the procedures carried out, the panel will have the same appearance as in the XP predecessor OS. This is clearly shown in the screenshot below.

Disabling UAC

A similar innovation came to Windows 7 from Vista. We will not talk about the need for such a decision, since this is one of the most criticized elements. It is important to say that it can be disabled without a serious loss to the security of the OS. The main thing is to use a different antivirus. It is required to consider various options for action in this situation.

It is possible to configure the frequency of notifications or completely disable the specified process. To complete the tasks, you need to go along the path: Start -> Control Panel -> User Accounts -> Change User Account Control settings.

However, if necessary, you can adjust the frequency of notifications or disable them altogether. We do the following: Start - Control Panel - User Accounts - Change User Account Control settings

As you can see in the presented screenshot, several gradations of work are provided. You can set the slider to the most attractive option.

Power management system

The Windows 7 operating system allows you to control power within certain limits. The electrical energy consumption of the device is set through a special settings section. You can put the most economical or productive option, as well as select a balanced mode. To access the corresponding window, you need to follow the path: Start -> Control Panel -> Power Options. If nothing is touched, then a balanced version is set. Below is the appearance of the settings window:

After setting it, you should proceed to use additional settings. To do this, click on "Change advanced power settings".

A window will be displayed where suitable settings are selected. When they are selected, it will only be necessary to confirm this.

Browser performance optimization

This item must be enabled if you are using the default browser - Internet Explorer. To speed up the work, you should take some measures:

1. Start -> Programs -> Accessories -> Command Prompt

2. Do the right mouse click and select "Run as administrator"

3. In some cases, a message is issued from User Account Control. You need to confirm the launch.

4. In the issued command line window, regsvr32 actxprxy.dll is introduced

5. You must press enter. When the task is completed correctly, a message with the following content should be issued.

After that, you can launch the IE browser. In the course of work, it should become much faster than before.

Speed ​​up animation when popping windows

It is allowed to significantly speed up the process of pop-up windows on the operating system. The following workflow is expected:

1. Launching the Registry Editor. You need to use the following path Start -> Run -> regedit
2. The special key HKEY_CURRENT_USER\Control Panel\Mouse is searched for
3. The key is opened and the detection of the MouseHoverTime parameter is performed there. For optimal performance it is recommended to set the value to 150 with the system.
4. Now we are interested in another key. Find HKEY_CURRENT_USER\Control Panel\Desktop. It must contain the MenuShowDelay parameter. Its value should be set to 100.
5. For all changes to take effect, you need to reboot the device.

Automatic login without the need to enter a password

Significantly speed up the time of work such a moment as logging in automatically, without the need to use an access code. To do this, it is necessary to perform the following sequence of actions:

1. You should go along the path Start -> Run
2. In the window, enter control userpasswords2 and confirm
3. The corresponding menu is displayed, where we are interested in the "Users" tab. You need to find your account and uncheck the box next to "Require username and password".
4. In the issued window, you need to confirm your access - a password is entered.
5. The system reboots to accept the changes.

Speed ​​up device shutdown

In some cases, when you turn off your computer, this process may take several minutes. When you consider the shutdown time to be too long, there are certain actions you can take.

The transition is Start -> Run, where in the window that appears, regedit is entered with further confirmation. We are interested in the key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control - this is what we need to look for. If found, the WaitToKillServiceTimeout parameter is changed. Its new value should be 500 or so. The default is 12000.

Removing arrows from labels

It all starts with the standard path Start -> Run -> regedit. In HKEY_CLASSES_ROOT\lnkfile you need to find the IsShortCut parameter and delete it. In order for the arrows to return to their place, the parameter must be restored. The device reboots to accept the changes.

Probably, all users at least once blamed their computer for slow work, while not thinking at all that there are a lot of opportunities to speed it up. Many people believe that improving PC performance is difficult and accessible only to advanced users, but this opinion is not entirely true. Yes, there are methods to improve performance that require a lot of skill in working with a computer, but there are many very simple ways to “overclock” a PC. Every user should be aware of these methods. In this article we will talk about them using the example of the most popular today. Windows versions- you will learn, how to speed up Windows work 7 .

Disable Visual Effects Windows 7

Turning off the visual effects of Windows 7 is the easiest and most affordable option to improve the speed of the system. To perform this procedure, follow the instructions:

3. A new window will open in front of you, in it click on the "Advanced" tab and in the "Performance" section, click the "Options" button.

4. In the "Options" window that appears, in the "Visual Effects" tab, you will see how many visual effects there are in Windows 7. Of course, thanks to them, the platform looks more interesting and pleasant, but they slow down the speed of its work quite a bit.

5. To turn off all visual effects at once, check the “Ensure the best performance” box, and if you want to turn off the effects selectively, uncheck the boxes you want.

6. That's it, for the changes to take effect, you must click "OK" and restart the PC.

Disabling unwanted audio

Along with visual effects, to make it more pleasant for the user to work with a PC, Microsoft also created system sounds. You will be surprised, but they also require certain resources, and disabling them can positively affect the performance of Windows 7.

To disable visual effects:

1. Press the combination Win + R, in the window that appears, write "mmsys.cpl" and click "OK".

2. A new window will open in front of you, select the "Sounds" tab, set the sound scheme to "Silent", click "OK".

3. Reboot your PC for the changes to take effect.

Disabling the Search Indexing Option

For users who often search for something in the system, Microsoft has provided a very convenient search indexing option, which makes it easier and faster to find files. However, if you rarely use the system search, this option is completely useless and only “steals” the performance of Windows 7. To disable it, do the following:

2. Expand the "Services and Applications" list, click on the "Services" line and in the list on the right, find Windows Service search.

By default, you can also disable the following services [screenshot below], as practice shows, they rarely benefit the average home PC user.

Removing "extra" programs from startup

Windows has an autoload option. It is responsible for launching a number of programs at the same time as the system boots. These programs include, as a rule, various services and applications, without which the correct operation of the PC will be impossible. But, unfortunately, quite often completely unnecessary third-party programs are added to these programs.

The thing is that third-party software developers include an autoload function in their products, thus making their program more “intrusive”. However, when it comes to running along with an antivirus system, this makes sense. However, there are many programs that run with Windows when they don't need to. Of course, this affects the speed of the PC.

To remove a program from startup, you must:

1. Press the key combination Win + R, in the window that appears, write "msconfig" and click "OK".

2. A window will open, select the "Startup" section in it.

3. Remove the checkmarks from the windows of those programs that you do not need to autoload.

Remember! Without some startup programs, the system will not be able to function correctly, so uncheck only those programs that you are sure are unnecessary.

4. Click OK and restart your PC.

HDD Optimization

At the beginning of the article, we mentioned that we will talk about simple ways to improve the performance of Windows 7, and, for sure, after reading this heading, you thought that we had already gone into the wilds, but this is not the case. We will talk about the simplest hard drive optimization and try to explain in an accessible way why it is required.

The fact is that all files that are written to the hard drive are broken into fragments according to a certain law. This is required in order to maximize the rational use of PC resources. However, it turns out that when a user accesses a particular file, the system has to collect its "pieces" throughout the hard disk. If a lot of unnecessary files have accumulated on your disk, this, of course, significantly slows down the process. That's why, hard disk optimization is a necessary procedure when it comes to how to speed up Windows 7.

The first and most logical way to optimize is to remove unnecessary files and programs. Each user has a lot of “garbage” stored on their PC and it is important to get rid of it regularly. Of course, any, even the most "zero" user knows how to delete files, but sometimes there are problems with programs, although this task is not difficult. To uninstall a program from a PC:

4. You will see a list of the programs you use, decide which ones you no longer need and delete them - to delete, click once on the "undesirable" program and click the "Delete" button.

5. After removing all unnecessary programs, restart your PC.

Another procedure necessary for optimizing a hard drive is its defragmentation. It's a complicated word, but it's simple:

1. Go to "Computer", right-click on the disk, select "Properties" in the drop-down menu.

2. In the window that appears, select the "Service" tab, then click the "Defragment" button.

3. After defragmenting, restart your PC.

If your system is divided into several disks, defragment each of them. Important! The defragmentation procedure, as well as the procedure for deleting unnecessary files, must be carried out regularly.

Meal Plan Optimization

This Windows 7 acceleration method is relevant for laptop users. Very often, disconnecting from the network, laptops automatically switch to a reduced power consumption mode, which, of course, corresponds to the minimum performance. Therefore, it is very important when returning to the network, to switch to high performance mode. Of course, no one forbids using this mode even when working offline, however, please note that in this case the laptop will run out faster.

To switch to high performance mode:

3. Select the "Power Options" section.

4. Put a dot in the "High performance" box.

Changing boot options

By default, at startup, the system does not use all its resources, this is necessary so that the "cold" iron is not loaded to the maximum. However, if your PC has more than 2 GB of RAM and more than one core, you can change the boot settings, thereby greatly speeding it up. For this:

1. Press the key combination Win + R, in the window that appears, write "msconfig" and click "OK".

2. Select the "Download" tab, check the box "Without GUI".

3. Next, click the button "Advanced options", in the boxes "Number of processors" and "Maximum memory", check the boxes, set the maximum value and click "OK" first in the window "Advanced boot options", then in the window "System Configuration".

Results

The settings of modern operating systems (Windows 7, Windows 8, etc.), according to the developers, should satisfy the majority of users, regardless of the model and modification of the laptop. However, practice shows the opposite: due to system overload and the presence of many unnecessary programs, laptops cannot cope with information processing, malfunction, and their performance drops. Most effective method- this is “overclocking”, but there are other ways, which will be discussed in this article.

Increasing the performance of a laptop makes sense for the following reasons:

• will improve the performance of your laptop;
• help your laptop last longer than usual.

Several ways to speed up

Replacement of the main components:

• Replacing the hard drive and increasing the amount of RAM.
• Installing a cooling system on a laptop.

A series of simple manipulations with your laptop:

1. Clean up automatic downloads.
2. Disable background services.
3. Optimize and defragment your hard drive.
4. Setting up power plans.
5. (separate article).

How to improve laptop performance with simple manipulations

Method 1: Clean Up Startups

The laptop almost always performs automatic downloads from the Internet. And if some autoloads are necessary for the device to update current versions of programs, then others are completely unnecessary. The user does not use an impressive part of these downloads at all when working on a laptop. That's just their presence in the device's memory, as well as automatic launch and operation in parallel with the operating system, greatly affect the speed of the desktop computer.

To clean autoloads, you need to:

1. Open the main menu of the Start device.
2. Go to the "Run" tab.
3. In the line that opens, enter the following combination of letters, switching the keyboard to the English layout: msconfig.
4. Next, click on "Enter".
5. A new window will open in which you need to select the "Startup" item, unchecking all the programs that you do not use.
6. To save the actions performed, click the "Apply" button, and then restart the system.

Method 2: disable background services

The default desktop design involves the issuance of various visual effects. Of course, visualization makes the work more enjoyable, but it is this feature that intensively consumes the resources of the processor, the RAM of the video adapter. To improve the performance of the laptop, it is better to disable such "decorations".

For this:

1. Go to the main menu of the device "Start".
2. Click "Run".
3. In the line that opens, write the following combination: services.msc.

This will display a list of all enabled background services with brief description each of them. Go through the list and select the services you don't use. When you click on the name of the service, a small menu will pop up in which you need to select the "Disable" button.

You must perform all actions carefully, disabling only those background services that you really do not need. Otherwise, "forced shutdown" may cause the device to malfunction.

Disabled settings, if desired, can always be restored by selecting the most correct operating mode for your laptop. Disabling background services will significantly offload the processor, while reducing the amount of RAM consumption. As a result, the performance of the laptop will increase, it will work much faster.

Method 3: Optimize and Defragment Your Hard Drive

In the course of work, a lot of fragmented files accumulate on the hard disk of the device. Each time when accessing these files, the system spends a lot of time, which is expressed in the form of "freezes" and "braking". In order to eliminate such phenomena, you should periodically defragment your hard drive..

This operation can be performed using special programs(utilities). The most popular utilities that really help improve system performance are Defraggler and CCleaner. After starting, they automatically optimize the system and defragment the hard disk, clearing the system of temporary files and errors accumulated on the disk.

You can also manually defragment the disk using the built-in defragmenter. To do this, go to the main menu of the device "Start", then go to "Programs" - "Accessories" - "Utilities", find "Disk Defragmenter" and run the application.

Method 4: configuring power plans

Modern operating systems (for example, Windows 7) provide the ability to manage power saving options, in particular, the user can independently configure the power plans for his laptop. By default, the system can use one of the modes:

• "Balanced" - a mode that turns on automatically as soon as the laptop connects to the network.
• "Economy" - a mode that is used when the device is operated on battery power.

If you customize the "Economy" plan in more detail, you can further improve the performance of your laptop. If you activate the "High performance" mode, then all the resources of the device will be used to the maximum without any restrictions.

To authorize this plan and access the settings of the center responsible for the device's power consumption, you need to click on the "Battery" icon. After that, a new window will open in which you need to select the "Advanced power options" item. As soon as the plan is activated, it will be displayed in the "Power Options" window. Typically, on laptops, the High Performance mode is hidden by default. You can display it by clicking on the "Show additional plans" arrow.

To set up the "Economy" plan, you need to follow the link "Setting up the power plan", which is located opposite the name of the mode. This will put the system into power saving mode, i.e. the device will automatically consume the minimum amount of power.

How to speed up a laptop by replacing its elements

You should not do these operations if you have never dealt with assembling a computer before, you can seriously harm your laptop. It is best to contact a professional in this case!

Step 1: Replace the hard drive and increase the amount of RAM

It is impossible to replace the processor or video card on a laptop, especially at home. However, you can improve the machine's performance by replacing the hard disk and RAM. Initially, you will need to replace the hard drive with a special SSD type drive. This will make it possible to significantly reduce the opening time of the main programs of the device and speed up the process of loading the operating system, as well as generally increase the performance of the hardware.

As for RAM, many manufacturers, in order to reduce the price of a finished device, significantly save on RAM by installing the simplest and cheapest modules in laptops. Therefore, it is advisable to replace the "native" modules of the machine with more modern and high-speed memory modules, for example, of the SODIMM type. But before replacing, be sure to check which memory standard your laptop supports (DDR3, DDR2 or DDR), as well as what is the maximum amount of memory that can be installed on your machine.

It’s better not to save money on buying the main system components, since replacing other elements of the system on a laptop on your own is extremely problematic, and sometimes impossible. In general, in order not to encounter such problems, you need to pre-purchase laptops with those processors that correspond to the tasks facing the laptop. In order not to be mistaken in this choice, we recommend the article "".

Step 2: install a cooling system on the laptop

You should not ignore the cooling system, because how quickly the laptop “heats up” directly affects its performance, performance and duration of the operating period. When choosing a cooler (laptop cooling device), it is advisable to give preference to well-known and trusted manufacturers (for example, Cooler Master, Zalman or Thermaltake). The cooling system will provide the device with quieter and more reliable operation in the most extreme working conditions.

It would also be useful to install a fan in the laptop, which will cool the front panel of the device, where the basket with hard drives is usually located. You can optionally install a fan in the back of the system unit.

You can also increase productivity with the help of modern programs (utilities) that automatically clean the hard drive from unnecessary information, and using fine system settings. However, you can basically save and increase the result if you do not download programs from suspicious and unverified sources on your laptop.

By downloading various pirated content, as well as various software from suspicious sites, you expose your laptop to a serious threat!

Definitely worth it, which will block all attempts of unauthorized access to your personal data.

In addition to protecting your laptop, antivirus will also contribute to it. better job thanks to the prohibition of malicious software.

I hope we were able to explain to you how simple it is to speed up a laptop. If you have any questions feel free to ask them below in the comments.

It's about beautifully moving, opening or closing files and windows with an overlay on these actions different kind improvements (parallax, dynamic lighting, fading, etc.). Entering Start -->Control Panel --> system and safety. In the system we find a partition , and after selecting it, in the window that appears, select View information about computer performance.

We fall into Visual effects settings, and here we mark the line .

The difference in the rendering of all visual elements on the desktop will immediately become visible - the design mode will change to the basic view.

Adjusting performance settings

Without closing the window in which the display type has just been changed, go to the submenu Additionally. Here it should be noted in the paragraph Processor Time Allocation work optimization programs, not services running in the background. Next, select the item Change the total size of the swap file on all drives. Check that the system performs automatic selection of the value and if this is not the case, then mark this parameter with a marker. After that, when you exit this menu, a warning window will pop up that the changes will take effect only after the computer is restarted, so you just need to confirm the action.

Important! It is not necessary to completely disable the paging file, since most of the applications involved in the OS will stop loading.

Optimize your desktop for faster loading

After the computer has been restarted, remove unused shortcuts from the work panel, as the system spends resources on drawing them. Yes, the load is small, but the main thing is that this will help improve computer performance on windows 7. Get rid of background visualization, as well as splash screens - this will help reduce OS boot time. To do this, go back to Start And Control Panel, where we find the section Decoration and personalization. We are interested in the menu , in which you need to select a section Image location instead of the current design line solid colors. You can now exit the menu by saving the new settings.

Disclaimer of Screensaver and Desktop Gadgets

Staying at the window Control Panel go to Decoration and personalization. Here you need to select a subsection Personalization and click on the menu Changing the splash screen. In the section that appears, change the line to No and click on OK. Going back one step, select Desktop Gadgets and check the sub-item Removing Gadgets. Feel free to get rid of all of them, because some of them (for example: weather, clock synchronization, etc.), in addition to using system resources, make an independent connection to the Internet, which also affects the speed of your computer. Then exit and once again carry out the reboot process, believe me, it will not be superfluous.

Advice. Never refuse OS offers to restart your computer - this will allow Windows 7 to save and use the adopted changes faster.

Disable system sounds

We go back to Start And Control Panel- here you have to choose Equipment and sound. By clicking on it, select in the paragraph Sound submenu Changing System Sounds. A pop-up window will allow you to change the line Default on Soundless, and a little lower, in the located window Play startup melody just remove the marker, then save all changes.

Changing the appearance of windows

For such a process, in the submenu Control Panel find a department Decor and in the department Screen choose Changing the color scheme. In order to improve the performance of a computer on windows 7, you will need to cancel the visualization offered by the OS Classical. The external display will be very contrasting compared to the previous one (in terms of visual rendering), however, this action will significantly unload the system.

OS Boot Boost

We go to Start and in line Find programs and files writing a command msconfig and press Enter. A window appears system configuration, where you need to select a submenu (the parameters that the OS uses when it starts up are written here). The line we are interested in is Without GUI, from which you want to remove the marker - this item is responsible for showing the splash screen and changes it to a solid black screen. There is also a tab here. Extra options, going into which you need to select in the line Number of processors(by default, the system always sets 1) the maximum available. We save the changes and exit. After that, the OS will ask if it should reboot immediately or do it later - apply the first option.

Disable pointer graphics

Mouse cursor animation is canceled after Start V Control Panel, and in the section Equipment and sound find subparagraph Devices and printers. It contains the desired subsection Mouse, by clicking on which we get into the window properties. Need a tab Pointers and the line Scheme- should be changed to No, then apply the changes and exit.

We configure the video card

To begin with, it is worth determining the manufacturer of the board that is installed in the computer and then proceeding with its software changes. It can be one of three options:

• Intel;
• Nvidia.

Consider the example of Nvidia (the techniques described below are identical and suitable for all other manufacturers), since the main thing here is to understand the sequence of actions. So, Start --> Control Panel and switching View modes on Large icons, choose a section nvi control paneldia. You need to go into it and in the window that appears, select the line Manage 3D settings. After selecting in the tab Global Options find an item Texture filtering-quality and change it to High performance. This action sets the priority mode of operation for the video card, that is, in a particular case, the emphasis is just in the direction of improving computer performance on windows 7.

Remove unnecessary programs from startup

We go to Start and write in command line msconfig then select the tab. It shows all the processes that the OS loads during its startup. Leave the anti-virus application (if any) unchanged so that it can regularly update its cumulative information and do not touch driver packages in the same way, because their timely replacement contributes to the smooth operation of the OS. From everything else, remove the marker and thereby you will significantly speed up the process of loading it.

Disable unnecessary services

The Windows 7 system contains in its settings a large number of universal software packages and utilities, many of which do not bring any benefit to the operation of a home computer. They simply take away part of the "precious" RAM and contribute to the creation of an extra load on it. Below is a list of options that you can opt out of for a range of services:

Name	Brief definition of actions
Fax	Required if using a fax machine
Remote registry	Remotely adjusts settings in the system folder
smart card	Enables smart card control device
Windows Error Logging	Extra storage of information that is unnecessary for a simple user
Bluetooth support	Justified by connecting media via Bluetooth
Required when working with a digital camera or scanning equipment
Tablet PC input	Justified to work with the ability to hand-write information
Server	When several PCs are networked in the house
Parental Control	For those who do not have children, this function is unnecessary
Windows Search	When is the process often used? active search data
TPM service	Interacts with control devices based on TMP or BitLocker chips
SSDP Discovery	When there are SSDP-connected media. Disable for safety
NetBIOS Support Module	Justified when operating several PCs interacting on the same network
IPsec Key Modules for Internet Key Exchange and Authenticated IP	A normal user does not need this feature.
Windows Defender	If antivirus is installed - disable
Access to HID devices	If you are using devices connected via a USB port, then leave
Print Manager	If there is no printer in the house, this is an extra feature.
Secondary login	Disable - this is an extra way to remotely penetrate
IP Helper Service	A typical personal device does not need it
Computer browser	Turn on when several PCs in the house are connected to one network
Windows Firewall	See line "Windows Defender"
Adaptive brightness control	Battery saving only with the presence of a light sensor - disable
IPSec Policy Agent. offline files. KtmRm for Distributed Transaction Coordinator	These services will only be needed when using several PCs at home interacting with each other on a single network.

Now we proceed to a direct shutdown, for which, on the command line Start recruiting msconfig. A window appears system configuration and in it we go to the tab Services. We go through the entire list and check the table, after which we save, exit and reboot.

Advice. To simplify, put a marker in front of the line Do not display services from Microsoft - this will help you determine where the “non-native” OS system packages are located.

Disable the disk indexing process and clean them up

This function is responsible for quick search on the physical disks needed in this moment files. After disabling it, there will be a slight delay when performing this operation in the future, but the performance of the computer on windows 7 will noticeably increase and optimize its operation. Choose My computer and right click mark drive C. In the subsection that appears, select the tab Properties. After you need to remove the marker from the item Allow file contents to be indexed in addition to file properties and wait until the system completes the revision of all data on this medium. A similar procedure must be carried out with the rest of the disks. Save the changes and exit.

Now you can start cleaning disks from unnecessary files and folders. For this, in the section Properties you have to go to the menu Disk Cleanup. In the subsection that appears, mark all lines with markers and start the process. Upon completion, immediately go to the tab Additionally and on the menu System Restore and Shadow Copy click on the button Clear. This command will start deleting checkpoints, leaving only the last one unchanged.

Note. It is rare when there is a need to use other points to restore the OS except for the latest one..

Checking disks for bad sectors and bad clusters

Back to the menu Properties local disk and open tab Service. Here we select a subsection Run a check and mark with marker Check disk options. After confirming the action, a warning will pop up stating that the system cannot now execute this command due to disk usage. All you need to do is click on the item Disk check schedule. This means that at the next reboot, your disk will be scanned by the system for bad clusters, and if they are found, the OS will fix them or delete them.

We refuse unused components of the "Seven"

To do this, go to the menu Start and on the command line write Programs and Features. Then we find the section Enable or disable features and in it we remove the marker from the item Print and Document Service.

Don't forget to scan your PC for viruses

Undoubtedly, one of the most important points, because very often it is virus attacks that undermine stable work(up to complete disabling) of a home computer. If your computer does not have an anti-virus application, then be sure to install good app with fresh antiviral bases. After downloading and installing the product, run a deep scan and make it a habit to do it regularly. You will see for yourself how much the performance of your windows 7 computer will increase.

Use ReadyBoost Technology

The "Seven" contains a system package that is responsible for using an external drive as an additional flash memory. The essence of the process is to reserve a certain amount of memory on a faster medium (for example, a USB stick), using it to store temporary system files. Insert the external drive into the appropriate slot on the PC and wait until it appears in the menu My computer. Right click select Properties flash drive, and then check the partition ReadyBoost and put a marker next to the line Providing this device for ReadyBoost technology. Then it remains only to move the cursor to select the maximum possible amount of available data storage.

Note. If on a computer instead ofHDD- the hard drive is equipped with a modern SSD-carrier, then this operation will be of no use and there will be no effect on performance, so you can skip this item.

Mandatory defragmentation of physical drives

All the information that is contained on the computer's hard drive is stored in blocks randomly scattered throughout the free space of the hard drive. In other words, the system "takes and saves" files on the principle "the closer the better" without organizing them. It is in order for all the data to be in the right places that it is necessary to periodically defragment the hard drive. Click on Start and on the command line write Disk Defragmenter, after which you will be taken to the corresponding menu. After the analysis, the OS itself will tell you which section requires intervention. Here you can also select other disks to scan and choose a convenient schedule for monitoring. The process takes a long time and it is recommended to set the parameters at night or when the computer will not be used.

Summing up

The speed and performance of the computer on the "Seven" is directly the sum of several factors - this is a competent combination correct settings PC, and hardware power of components in the system unit. All of the above methods of "debugging" the OS are aimed at increasing the speed of reading and processing system applications. Believe that you are able to carry out such changes yourself, without resorting to the help of third parties.