Water heater ariston 80 liters instructions for use. User manual (instruction) for the operation of the Ariston electric water heater

Proper use of the boiler determines the durability of the device and its smooth operation. You need to know how to turn it on correctly to start the system, and how to turn it off to save electricity.

The installation of the Termex water heater is carried out by professionals, and you will have to turn it on yourself. But you need to know exactly how to perform this action correctly so that the device does not fail. The flow is switched on according to the usual scheme: air is released, hot water is shut off, the necessary settings are set, and the system is turned on. The main difference between a flow boiler and a storage boiler is in the time of heating water. The first option requires only 5-15 seconds, and the second - 2.5-3 hours.

Steps to turn on the water heater:

1. The shut-off valve on the hot drain is blocked.
2. Air is being released. First, the faucet is opened hot water and then cold. The air is determined by a torn stream, when the water is intermittent, and the faucet itself can “snort”.
3. When the water begins to flow calmly, all taps are closed. The boiler is connected to the network.
4. Before the connection itself, it is necessary to set the required temperature.

The performance of the boiler is checked on the panel. Indicators, temperature are checked. If everything is in order, then after 15-20 minutes the temperature will begin to rise.

But there are times when the connection is quite problematic and the water heater does not turn on. In this case, electricity networks, sockets and other elements are first checked. Also, the cause may be a broken cable, which is checked with a tester.

How to use the water heater "Ariston"

Special difference in connection storage systems No. The Ariston boiler is similar to connecting other devices. Let's take a closer look at each successive stage.

The sequence of connecting the water heater "Ariston":

1. It is necessary to close the hot water supply with shut-off valves.
2. It is necessary to open the tap at the installation site of the unit and drain the water from it. After that, you need to close the tap.
3. Air is vented from the water heater. To do this, first open the tap at the inlet (marked in blue), then the hot water tap (marked in red). After the air is released, when the jet becomes even, it is necessary to close the hot water tap.
4. Crane with cold water does not close, as its supply is regulated automatically.
5. The boiler is connected to the mains, and the temperature parameters are adjusted.

After completion of work, it is necessary to check the performance of the unit. When the panel is turned on, the temperature starts to increase. If this does not happen, then the water heater was connected incorrectly or the boiler broke down.

About the repair of water heaters, our following material:

When the boiler was turned on for the first time, it must be given time to warm up the water to the maximum temperature. Open the faucet on the faucet and check for leaks. If they are absent, then you can safely use the water heater.

The instructions for using the boiler regulate the correct operation of the device. It is important to follow all its instructions.

After switching on the device, it is necessary to set the required temperature. Usually these parameters are determined by three modes: 35, 55 and 75 degrees. In some models, you can set the temperature to 10 degrees. This mode is called "antifreeze".

Tips for using the boiler:

1. It is not necessary to connect the water heater when there is no water in the tank. This will cause damage to the heating element. The safety valve is equipped with a check valve, which must be checked once a year.
2. Setting the temperature depends on the wishes of the owner, but once every 2 weeks it is necessary to turn on maximum temperature for a couple of hours. This will prevent the reproduction of pathogenic microflora.
3. Cold water should be filtered with a strainer. Depending on the characteristics of the water, additional treatment plants are installed.

Flow boilers are also easy to operate. Turning on the device begins with unscrewing the tap with hot water. The temperature is pressure controlled.

The boiler is quite an expensive device. Every owner will know about this when it comes time to pay for electricity. That is why there are a number of recommendations for saving electricity.

Rules for the budget use of the boiler:

1. There is no need to turn off the water heater if you need hot water all the time. When the boiler keeps a constant temperature, it takes less energy than it takes to heat it up every time.
2. If hot water is needed less than a couple of times a day, then it is better to turn off the boiler.
3. Some models have an economy mode.

Expert advice will help you choose the right model:

But most importantly, you need to save water itself. It doesn't need to flow unnecessarily. Heating is fast enough, and closing the tap for a few minutes during the procedures will save.

How to turn on the boiler immediately after installation (video)

Installed boiler in the apartment - an indispensable thing. It does not matter whether the water heater will be instantaneous or storage, since the start-up is not fundamentally different. At the same time, it is important to use the device economically and observe all operating rules.

Each property owner wants to equip his house with an autonomous plumbing system that supplies hot water. Thus, you can use hot water all year round, regardless of the season or the schedule of the centralized installation. The 50-liter Ariston water heater is in great demand because it has a wide range of advantages.

A water heating boiler is a specialized device that performs the function of heating water with further stable maintenance of the temperature regime for a long time. What exactly is interesting about the 50-liter model and what models the manufacturer offers - in our article.

Equipment classification

Units of this manufacturer are divided into several classifications based on the following parameters:

• Water heaters are accumulative, flowing, indirect;
• Floor or wall type devices;
• Equipment operating with natural gas or electricity.

Each device has a specific heating system, a control unit, fasteners corresponding to the classification and other additional options.

Purpose of the tank

Household units powered by electricity are often used during the period when the water supply from the centralized pipeline stops. For short-term use, small wall-mounted storage water heaters are purchased. With proper installation, the device will provide the house with a supply of warm water, which can be used to fulfill all household needs: washing dishes, wet cleaning, washing things or taking a shower.

In private cottages in combination with gas boilers use gas or electric type heaters with large dimensions of the storage tank. In this case, the Ariston boiler is used year-round.

Rating of the best Ariston water heaters for 50 liters

The Italian company produces many modifications of water heaters, differing in the type of heating, volume, shape and other important technical characteristics. We offer to consider the most popular models.

Ariston (50 liters) VELIS INOX

The wall-mounted device can be installed in a horizontal or vertical position. It is characterized by relatively low cost and medium volumes. The flat shape of the unit allows you to mount equipment not only on the open area of ​​\u200b\u200bthe wall, but also in a niche.

The Ariston water heater is equipped with copper heating elements and power up to 2500 watts. In addition, the device has a protection system located on the electrical cord and a fuse that prevents unexpected start-up of devices with an empty tank.

Short description:

Ariston ABS VLS INOX QH

The external parameters of the model have significant similarities with the previous modification. The unit is equipped with automatic equipment that quickly heats up and thoroughly filters the liquid. In addition, the device regularly monitors temperature regime the coolant itself, preventing the electric water heater from overheating.

Ariston ABS VELIS PW

The inside of the equipment is covered with a protective layer developed in accordance with the innovative technological scheme AG+. The equipment is equipped with a system of protection against bacteria and two heating elements.

When assembling the device, a special welding technology was used, providing a strong and monolithic connection, which eliminates the possibility of leakage.

Ariston ABS PRO R SLIM

The cylindrical shape of the equipment allows you to install the unit in any convenient corner of the room. Accumulative electrical elements produce rapid heating of the liquid. The budget version is divided into classifications by displacement - 30, 50, 65 and 80. You can buy a unit at an average cost - from 8,000 to 14,000 rubles.

First power on

In order for the device to properly perform the functions for its intended purpose, you need to follow the selection recommendations, install the equipment and make the first switch-on, taking into account all the rules. Most Ariston water heaters are characterized by the following step-by-step start instructions:

1. First of all, the cold water supply valve opens. It is very important not to confuse the element with the safety lever.
2. At the same time, open all mixers that receive a hot stream of liquid. The faucets will produce loud sounds and the pressure will be intermittent.
3. Wait until the tank is completely filled when a steady stream of water comes out of the faucet.
4. Turn on the power, set the temperature to medium.

It will be possible to increase the degree of heating after the first start-up of the equipment.

It is very important in the Ariston 50, 60 or 100 storage water heater to fix the lever in the required position, which is responsible for supplying hot pressure. If you ignore the situation, the heated liquid can enter the common riser of the house.

VIDEO: Water heaters ARISTON. Installation and assembly

Repair work

Like any other technique, an electric storage water heater of 50 liters is flat or rounded, has vulnerable elements. In this case it is:

• Thermoregulatory system;
• Heat transfer sensors;
• Switches;
• heating elements.

Valves or gaskets are often the first to fail. The integrity of the boiler is violated in rare cases. The reason for this can be corrosion formations and improper operation. In case of serious damage, you must contact the service department.

Repair of Ariston 50 at home provides only preventive processes associated with the timely cleaning of heating elements. Experts recommend cleaning parts at least twice a year.

First signs of breakdown

1. During operation, the device emits a hiss.
2. The average amount of time spent on heating water has increased significantly.

Before proceeding with repair work, it is necessary to carry out preliminary preparation of the device. To begin with, the power supply is turned off, the liquid is drained from the system, the water supply is shut off.

The most optimal option for descaling is considered lemon acid previously diluted in water. The liquid is poured into the tank for a day, after which the mixture is poured out and the container is washed from the remnants of plaque with clean water.

The magnesium anode helps to solve the scale problem, in which the potential limit is lower than that of the tank coating and the heating element itself. If to speak plain language, the process of rust formation begins precisely from the anode, and only then it “spreads” to the heating element and the inner surface of the tank. With regular replacement of the anode (on average 1 time in 8-12 months), the heating element will not need to be cleaned, and the equipment itself will work properly.

All modern water heating equipment is already equipped with removable magnesium anodes. The user is only required to timely replace with original consumables.

If you need to replace parts yourself, you should purchase only original items. Spare parts can be ordered from a specialist dealer or from direct suppliers.

Disadvantages of Ariston 50 l, 60, 100

• Requires regular preventive maintenance to clean the heating element from scale. If you clean the heating element less often, this will lead to a quick breakdown of the device.
• Uneconomical consumption of electricity.
• Expensive repairs and spare parts.

VIDEO: Ariston water heater repair

Like all Ariston appliances, the water heaters of this company have a lot of benefits:

1. The first of these can be called stylish design which helps to decorate any interior. Moreover, each of the models is created in accordance with the latest technologies.
2. Ariston 80 water heater is different maximum long term services . This effect was achieved due to the fact that the internal walls of the storage tank are covered with a layer of modern material that protects the tank from plaque and rust.
3. Built-in latest dividers, prevent mixing of already heated and cold water . This allows you to keep the temperature of the liquid. Also, the Ariston heater is protected from overheating, thanks to built-in temperature control sensors.
4. Presence of a safety shutdown device , which is triggered at moments of a sharp change in voltage.
5. Using Ariston water heaters, users can significant savings on gas or electricity consumption . This is facilitated by the presence of thermal insulation, which keeps the water hot for a long period of time.
6. Many models of water heaters equipped with bacteria protection which makes it possible to use purified water. If there is no water in the system, then you do not have to worry that the water heater will turn on, as it is equipped with special protection.

The device of ARISTON water heaters for 80 liters

The external simplicity of any water heater carries with it the same uncomplicated internal structure. The difference can be observed only in the external design and materials from which the heater is made. External structure The body can be made in a cylindrical or flat shape.

Any water heater has:

• Inner tank - a boiler into which cold water enters. It is framed by an outer casing.
• The water that entered the tank is heated by the built-in heating element . For faster heating of water, two heating elements may be present in the boiler.

• Thermal insulation layer , which is present between the body and the boiler, acts as a thermos, which allows you to keep the water temperature longer.
• Water enters the tank through shortened branch pipe with divider . The heated water is supplied by a drain pipe.
• magnesium anode , built into the ariston 80 water heater, helps prevent the deposition of mineral salts on the walls of the inside of the tank. This element is replaced as needed.

• During heating, when the set temperature is reached, the thermostat , which automatically interrupts the power circuit.
• If the heating element is turned on, and the water temperature indicators have fallen below the set ones, then the configured thermal relay .
• Allows you to control the operation of the water heater voltage indicator (indicator light).
• Built-in thermometer makes it possible to monitor temperature changes.

The storage water heater ariston 80, which belongs to flat horizontal models, has the same typical internal structure.

Shuttle Ariston electric water heater: instructions for using boilers, diagram

After buying such an assistant as an Ariston 80 liter water heater into the house, the instruction should be the first document that should be carefully studied before starting its operation. This will help to understand all the nuances of working with the boiler and extend the period of operation of the device.

Ariston water heater 80 liters is used to supply the house with hot water. The choice of this series of heaters is promoted by a set of positive characteristics.

The ariston 80 v water heater has the same device and instructions for use as all models of this series. Installation should be carried out in accordance with the attached diagrams.

Connecting the boiler Ariston

It is better if this work is carried out by specialists. The rules to be followed when installing the device are given below:

1. It is necessary to inspect the safety valve, which should not have visible flaws. If they are, then the damaged part should be replaced.
2. Plastic dowels are used for driving screws.
3. Be sure to check all grounding elements.
4. The electric heater requires a separate power line to operate. The use of extension cords is strictly prohibited. The socket is placed in a non-humid place.
5. In operation, you must use the plug that came with the kit.

The water heater Ariston 80 performs the following functions :

• Turn on/off . After switching on, the whole system starts up, which is due to the lights on, the temperature of the water in the boiler will be displayed. If the indicators are not displayed or flashing, this indicates a system shutdown.
• Water heater ariston abs vls 80 has power level adjustment function , which makes it possible to set the necessary indicators.
• Water heater ariston abs vls pw 80 allows you to use antibacterial function , which can be activated or deactivated by holding the "power" button for 5 seconds.
• Possibility to adjust the temperature using the "+" or "-" buttons in the range from 30 o to 75 o; The set values ​​are not fixed. After switching on again, the values ​​\u200b\u200bmust be set again. Standard temperature values ​​​​are 75 °, power - 1500 watts.

Water heater operating rules

It is not difficult to extend the life of an ariston brand storage heater, you just need to install it according to the instructions and steadily follow the rules for using the device :

• Should control the presence of water in the boiler every time you turn it on and off devices. Switching on is possible only when the tank is filled with water.
• If the power cord is damaged, replacement must be carried out with a material of the same brand , which is best purchased at a specialized outlet.
• If the heater will not be used for a long period, especially during the cold season, then water from the boiler must be drained , following all the rules prescribed in the instructions. After that, the cold water supply valve is closed. After these steps, the heater is disconnected from the electricity supply.
• The heater eventually requires cleaning from dirt . To carry out this work, it is better to use the services of specialists.

Reviews of ARISTON water heaters with a volume of 80 liters

For those buyers who have decided and purchased an ariston water heater, the reviews remain purely positive. Below are some of them.

“Pros: excellent “employee”.
Cons: didn't find any.

Since we have a private house, but there is no gas, it was decided to purchase a boiler. Tired of constantly heating water on the stove in order to buy up and simply wash the dishes. We asked friends who already have experience with such units. Those, in turn, advised the ariston water heater. After reading more reviews, we opted for a brand like ARISTON.

Bought a model with a volume of 80 liters. This is enough for a family to use. I really liked the presence of a sensor with which you can always find out the level of water temperature in order to “not get into a slippage”)). This heater served us for many years, it was even sad to leave (they removed it, because they had gas and connected a double-circuit boiler). But during the service, this heater proved to be just fine: it quickly “delivered” hot water and kept its temperature for a long time, it consumed little electric energy. In general, the model is excellent !!!

“Advantages: compactness, fast heating of water, low electricity consumption, equipped with additional protection.
Cons: none.

Excellent water heater. I had to get acquainted with him when a systematic shutdown of hot water began in the houses for an indefinite period. In order not to sit and wait for a "miracle", it was decided to buy a water heater. On the advice of the seller purchased a heater

Ariston SG-80, which did not have a high price. And yes, we liked it too. The place for the boiler was determined in the toilet, where it did not create inconvenience to anyone. During the use, we made sure that we took an excellent assistant: it quickly heats water (80 liters in 4 hours), consumes little - 1.5 kW, heats water to an acceptable temperature - 75 o, there is a safety valve and a magnesium anode. We were completely satisfied with our choice!”

“Advantages: simplicity, reliability, ease of use.
Cons: didn't find any.

The Ariston SG-80 brand water heater came into our house back in 2013, we bought it at a discount and did not regret it. My husband did the installation himself and it wasn't that hard. The heater serves the bathroom and sink. There is enough water to the head, despite the fact that we set the heating level to 50 o, it allows you to save a little. It takes an average of 2 hours to heat 80 liters at this temperature. I was very pleased with the quiet operation of this device. We are satisfied with the purchase."

“Advantages: heating up to 75 °, low consumption of electricity.
Disadvantages: little essential, but ill-conceived lid.

Our small town is not connected to hot water supply. While they lived together, they managed. But after the appearance of the baby, they decided to buy a boiler. We chose models with a volume of 80 liters available at our means. We settled on the Ariston SG 80 model, which suited us in all respects: energy consumption of 1.5 kW, volume, heating temperature, which reaches 75 ° and, of course, the price.

Having established, they themselves felt the dignity. Everything worked "with a bang." It created a little inconvenience when switching the temperature, when it was necessary to switch the lever under the lid. It was not quite convenient to crawl with a screwdriver to the right place. But this is not so significant, because we had to change the temperature indicators only once. In general, the model is excellent. I recommend to all!"

Prices for the main models (name, description, manufacturer, price)

When it comes time to buy a heating device, it is immediately better to pay attention to the Ariston 80 liter water heater, the price of which is fully consistent with the quality. Consider some models of heaters from this manufacturer.

ARISTON ABS BLU R - vertical storage water heater. The price ranges from 6300 to 7700 rubles.

• It has an anti-corrosion coating Ag +;
• Additional protection in the form of a magnesium anode;
• Uniform heating of water is provided by the Nanomix technology;
• Thanks to Absolut Bodyguard System technology, the system is blocked in the event of a lack of water or power surges;
• Built-in safety valve.
• Built-in external thermometer.
• Mechanical control with indicator.
• Water heating up to 75 ° is carried out in 3 hours with a consumption of 1.5 kW.

water heater ariston vls pw 80 - wall heater with the possibility of mounting horizontally and vertically. Price for this model varies between 11,000 - 13,000 rubles.

• The inner tank is treated with a special Ag+ coating;
• Double heating element accelerates water heating by 60% after connecting the ExraPower mode;
• ABS 2.0 protection protects the system from power surges and operation in the absence by turning it off.
• External water temperature sensors allow you to monitor the state of water heating;
• Built-in ECO antibacterial system;
• The Nanomix technology accelerates the heating of water, which contributes to the uniform heating of the liquid.
• Water is heated up to a maximum value of 80 °C at a power of 1.5 kW in 3 hours, at a power of 2.5 kW in 2 hours.

Ariston SUPER SGA - excellent gas heater made in Italy. The price of such a storage water heater is 16,500 rubles.

Device characteristics:

• Steel case;
• Internal enamel anti-corrosion coating;
• Thermal insulation layer made of polyurethane foam;
• The presence of a gas valve.
• Connection can be carried out both in parallel and in series;
• Works independently of the mains;
• Ability to control the flame;
• External regulators and indicators.

Flat electric water heater Ariston ABS VLS INOX PW Can be installed in vertical and horizontal position. The price for such a model is 17,250 - 19,930 rubles.

Main characteristics of this model:

• Steel inner tank with additional protection;
• The “fast” function speeds up the heating process by turning on the second heating element;
• Antibacterial protection system;
• Protection against overheating, power surges, switching on without water;
• Built-in “Nanomix” system;
• The presence of an electronic thermometer;
• There is a system "Autodiagnostics";
• External display with control buttons.
• Water is heated up to a temperature of 80 ° C by one heating element in 3 hours 06 minutes with a consumption of 1.5 kW, with the “fast” system turned on in 1 hour 51 minutes with a consumption of 2.5 kW.

An analysis of sales of the domestic market for water heating equipment shows that the undisputed leader here is the products of the Italian company Ariston. Invariably high quality, reliability, ergonomic design - that's what attracts consumers to the products of this company. Among the many models, the most popular are Ariston 100 l water heaters, since they are able to satisfy the daily need for hot water for a family of 3-4 people. It consists of a body and a tank covered with insulating material, as well as a heating element and control devices (thermostat, control unit).

The manufacturer, among others, manufactures installations that have a volume of 100 liters. Basically, these are storage-type electrical devices that are used to heat water in apartments, private houses and other premises connected to the mains. They are presented in the following series:

1. Ariston ABS Velis (QH, INOX QH, POWER, INOX POWER, PREMIUM).

The abbreviation ABS means that all models are equipped with the Absolute Bodyguard System - a residual current device. In the event of power outages, water leaks or problems with the pressure valve, the system blocks the operation of the device, making it absolutely safe. The main difference between Velis 100 V and other series of units is that they are equipped with 2 internal independent tanks, in which it is installed according to the heating element.

This allows you to get water heated to 45 ° C already 53 minutes after switching on. Both tanks are internally treated with a layer of AG+ (plating with silver content), which contributes to the protection of the body from corrosion. The wall-mounted storage electric water heater Ariston Velis can be mounted on the wall in any position: vertical or horizontal. A digital display with programming function is installed on the front panel of the boilers.

2. Overview electric water heater Ariston ABS PRO R 100 V indicates that the unit is equipped with a tank made of cold rolled steel. Its surface is coated on the outside with a layer of finely dispersed enamel, which provides protection against leakage and corrosion. The Ariston ABS PRO-R 100 electric water heater is equipped with an on / off indicator, a reliable mechanical thermostat and a heating scale displayed on the outer panel of the device. In addition, it has a special magnesium anode that protects the heating element from premature wear.

In the production of a metal tank of a 100 l Ariston ABS PRO ECO 100 V storage water heater, a special welding technology (microplazmatig) is used, due to which high strength and durability of the seams are achieved, and the boiler is able to withstand pressure drops up to 15 atmospheres. Silver-derived ECO coating neutralizes harmful chemical elements. The unit is equipped with an electric thermometer that allows you to monitor the operation of the boiler in real time, ensuring constant temperature control.

1. Ariston ABS Blu.

The devices in this series are model lines R and ECO. The description of the Ariston Blu R100V vertical water heater suggests that this modification is equipped with a simple mechanical thermostat. The storage tank is covered with a protective layer of polyurethane on the outside, which contributes to the fastest possible heating. The walls of the tank are covered with a protective layer of Ag+ from the inside. Another model - BLU ECO POWER 100V, is equipped with an electronic thermostat and a digital display. It is intended for the accelerated heating of water.

The series includes compact boilers TI TRONIC, TI TECH and TI SHAPE. Ariston TI TRONIC is a high-quality water heater equipped with a mechanical device for temperature control. The inside of the container is treated with Titanium + technology, which provides it with protection against rust formation. The Ariston TI TECH QB 100V compact water heater device is equipped with a simple thermostat, but it has more power and heats the water faster to the desired temperature.

3. Ariston Perla.

This is a type of heating devices that combine 2 heating methods. For example, specifications combined water heater Ariston PERLA 100 VRDT / 5 are such that due to the heat exchanger built into the tank during the heating season, it can function as an indirect type heater. Then a 1.5 kW heater makes it possible to use it as an electric boiler, for this it is only necessary to turn off the tap connecting the installation to the heating system.

Models of this series also belong to the combined type and are equipped with two types of heaters: a heat exchanger and a heating element. In addition to the main thermostat, the SG R 100 LTDTS has an additional one, which makes the work completely safe.

In addition to the above electric heaters, Ariston also produces units with a tank volume of 100 liters, powered by another source of energy - gas. However the lineup of such installations is limited to SGA products. Gas installations have natural draft and an open combustion chamber, which makes it possible to obtain heated water regardless of the pressure in the gas and water supply system. In addition, they are equipped with a piezo ignition device with a built-in thermocouple that controls the flame. Modification of the wall-mounted boiler SUPER SGA is used for domestic and industrial needs.

Technical characteristics of water heaters with a tank of 100 liters

Series	Model	Indicators
		power, kWt	Voltage, V	Working temperature, °C	Pressure, bar	Water heating time up to 45 °C, min	Dimensions, mm	Weight, kg
Velis	QH,INOX QH	1,5+1	230	80	8	first tank - 53, second - 139	1275x490x270	30
	POWER, INOX POWER	1,5+1		80		First tank - 91, second - 139
Pro	R	1,5		75		206	913x450x480	26
	ECO	1,5		80		232	1338x450x470	26
blu	R	1,5		75		232	913x450x480	26
	ECO POWER	2,5		80		130	1338x450x470	29
TI	TI TRONIC	1,5		80		232	913x450x480	26
	TI TECH QB	2,0		75		170	963x493x499	34
PERLA	100 VRTD/5	1,5		80		232	913x450x480	25
SG	SG-R100L/RTDTS	1,8		80	6	175	904x450x470	35
SGA	SUPER SGA	4,4	—	45	8	71	950x495x510	35

Advantages and disadvantages

The positive qualities of Ariston boilers include:

• Rapid heating of the required volume of water.
• Processing of tanks using AG+ and Titanium+ technology.
• ABS system, which protects installations from breakdowns associated with power surges, leakage, and so on.
• Simple, reliable mechanical and electronic thermostats that allow you to achieve the most accurate control with an error of no more than 1 °C.
• Possibility of use at low pressure in the water supply system.
• The ECO function provides water purification from harmful chemical elements.
• With all the technical innovations used in the manufacture, the price remains affordable for any category of consumers.
• Warranty period from 5 to 10 years.

Judging by the reviews, the water heater is not without drawbacks:

• The load on the power grid increases by an average of 1-1.5 kW.
• When the power is turned off, such equipment will not work.
• The kit does not include brackets for wall mounting, flexible hoses for inlets, and a condensate drain pipe.

How to install an Ariston water heater

According to the instructions, the Ariston electric storage boiler should be installed in dry, warm, well-ventilated areas. This process takes about 2 hours and consists of the following steps:

1. Using a perforator, holes are drilled in the wall for anchors, on which the water heater is hung.

2. With flexible hoses, it connects to the water pipe. As a rule, the cold water inlet is marked in blue. It has a pressure relief valve. The red outlet is connected to the hot tap. Tow is wound on all joints.

3. Taps are opened and all connections are checked for leakage.

4. Using the connector, the device is connected to the mains. The contact on the water heater terminal, marked with the letter L, means "phase", with the letter N - "zero", yellow grounding is marked.

In the event of problems during operation, it is better to entrust the repair of the Ariston boiler to a specialist by contacting an authorized service center.

Such offices are open in all major cities of Russia. Self-repair can lead to damage to expensive components and removal from warranty service.

Price

Average prices in rubles in Moscow are different and depend on the series and model of the boiler. The cheapest TI Shape 100 V installation costs 4,800 - 5,660. Moreover, it is worth noting that the price of an Ariston TI Shape 15 UR water heater, equipped with a much smaller tank (only 15 liters), is not much less - 4,100 - 4,500.

• Model ABS Blu R 100 V will cost 5,900 - 7,000.
• You can buy Ariston ABS PRO ECO 100 V for 7,100 - 8,600, ABS Pro-R 100V is somewhat cheaper - 5,800 - 8,380.
• The cost of a 100-liter quick heating water heater Ariston Velis is 12,700 - 14,910.
• Installations of the combined type Perla 100 VRTD / 5 will cost an average of 9,440 to 10,400.
• The most expensive are gas-powered units SGA-17,100 - 1,9,700.

The Ariston water heater is designed according to the latest technologies The Ariston water heater is designed according to the latest technologies, has not only a high-quality water heating tank, but also good technical characteristics. The main advantages of such a boiler are durability and reliability, intuitive control and convenient operation. Each device is necessarily supplemented by a detailed instruction manual, which allows you not only to install and connect the water heater yourself, but also to perform simple repairs with your own hands.

• • 1. Electric water heater Ariston: technical characteristics of boilers for 50, 80 and 100 liters
  • 2. Water heater Ariston: installation (video)
  • 3. Gas boiler Ariston
  • 4. Boiler Ariston: device and principle of operation
  • 5. Operating instructions for Ariston water heaters
  • 6. Overview of the Ariston water heater (video)
  • 7. Do-it-yourself Ariston boiler repair
  • 8. Repair of the water heater Ariston (video)
  • 9. Reviews and comments

Electric water heater Ariston: technical characteristics of boilers for 50, 80 and 100 liters

Ariston produces more than seventy models of storage water heaters with a capacity of 10-200 liters. The storage electric water heater is represented by several models, among which the 50.80 and 100 liter series are especially popular.

	Volume (liters)	Heating time up to 45°C (min)	Protection class IPX	Dimensions (mm)
ABS VELIS INOX QH D
ABS PRO ECO INOX POWER SLIM
ABS PRO ECO INOX POWER
ABS BLU ECO POWER SLIM

Water heater Ariston: installation (video)

Gas boiler Ariston

The cost of gas equipment depends on the principle of the water heater and its type. Each boiler is arranged, as a rule, of the same type, but it also has some features:

• DGI water heaters have electronic ignition and manual power control. Characteristic is the natural removal. The gas water heater has a laconic rectangular shape;
• Fast-CF does not need additional power supply, and copper is used for the heat exchanger, which can significantly reduce heat loss;
• Marco-Polog7s features a closed combustion chamber for added operational safety. There is a touch screen and modern design, which makes the model the most popular among consumers;
• Marco-Polo M2 is a model with an open combustion chamber and a smoke exhaust fan. There are a couple of stages of device protection that prevent overheating and guarantee high performance safety and long service life.

Before installing the device, you must familiarize yourself with the principle of operation of the Ariston water heater, as well as study the instructions with detailed instructions for the individual features of the installation.

DGI water heaters have electronic ignition and manual power control

Boiler Ariston: device and principle of operation

The manufacturer uses proprietary protection against corrosive changes. Absolutely all budget models are equipped with a mechanical regulator, and each expensive water heater is equipped with a digital control unit. An internal temperature controller works inside the water heater, which allows you to optimize heating. The device and principle of operation of such equipment are as follows:

• an internal tank or boiler designed to receive cold water and framed by an external casing.
• built-in heater designed to heat incoming water;
• heat-insulating layer located between the body of the water heater and the boiler, which performs the function of a kind of thermos and allows long time keep the temperature indicators of heated water;
• a shortened branch pipe equipped with a divider for water supply;
• outlet pipe;
• built-in magnesium anode to prevent strong sedimentation in the form of mineral salts on the walls of the inner surface of the tank.
• thermostat designed to automatically interrupt the power circuit after heating the liquid to the specified temperature.

The device and principle of operation of Ariston boilers are relatively simple

Control of the operation of water heating equipment is carried out by means of a voltage indicator, and with the help of a built-in thermometer, you can monitor changes in temperature indicators.

Ariston water heater user manual

Convenient connection of water-heating equipment from the company "Ariston" consists in the use of manufacturers of an autoclave special flange mechanism. The basic principle of operation of such a mechanism is based on pressing the gasket under the influence of water pressure. As a result, it is possible to completely eliminate not only the leakage of liquid, but also the formation of watery smudges. To avoid unnecessary heat losses, the fixing of electrical models of the water heater from the company "Ariston" is carried out in close proximity to the output point.

Overview of the water heater Ariston (video)

To install wall models, the equipment is fixed with anchors or bolts. The optimal standard fastener diameter should be 10 mm or more. Installation of 100-liter hot water tanks has some features. In this case, fastening must necessarily occur with fixation on the other side of the wall. It is for this reason that experts recommend installing water heaters before the start of the main finishing work.

It is important to remember that when connecting different types metals, it is mandatory to use dielectric adapters, through which differences in the degree of expansion of materials differing in parameters are compensated. It is necessary to connect the input using a standard valve, and a branch pipe is installed on the output. On final stage the installed water heater must be turned on and checked for correct connection, no leaks and operability.

To install wall models, the equipment is fixed with anchors or bolts.

During the operation of water heaters manufactured by Ariston, as a rule, difficulties do not arise, but it is necessary to take into account some rules that affect the durability of the device and its performance. Performed periodically preventive actions, including inspection of the internal parts of the equipment, descaling and replacement of the heating element that has become unusable. The average duration of the operation of all mechanisms of a particular model can be found in the manufacturer's instructions. It must be remembered that the timely replacement of the anode allows you to extend the life of the water heating mechanism. In accordance with the recommendations of professionals, it is not advisable to set the thermostat to the maximum heating level.

If you set the temperature limit by about 10 ° C below the maximum values, then you can significantly reduce the cost of electrical energy, as well as save the resources of equipment parts. It is important to remember that you can disassemble the device yourself only in last resort. Do-it-yourself repair work will result in the exclusion of the possibility of exercising the right to warranty repairs.

During the operation of water heaters manufactured by Ariston, difficulties, as a rule, do not arise

Do-it-yourself Ariston boiler repair

Repair work related to the elimination of breakdowns in gas appliances requires the involvement of qualified specialists, and the repair of an electric boiler can, as a rule, be done independently.

Major mechanical failures are most often manifested by tank leaks, from which water begins to ooze or drip during operation. The cause of this problem may be corrosion in the areas of the welds or a malfunction of the reverse protection system of the valve, which operates and performs an emergency reset. In this case, it is necessary to eliminate the excess level of water and air pressure by means of a reducer. Any depressurization of the storage tank will require the purchase of a new tank. If such a defect is insignificant, then it is enough to replace the sealing gasket.

Repair work related to the elimination of breakdowns in gas appliances requires the involvement of qualified specialists

A relatively inexpensive undertaking is self-replacement some electrical parts, including heating elements, bimetal thermostats, sensors or switches. In case of prolonged heating, noise or hiss, as well as in the event of an ABS system shutdown protection, a replacement of the heating element is required, the average service life of which, as a rule, does not exceed five years. Replacement is carried out after de-energizing the device, draining the water and removing the flange.

It is very important to systematically check the magnesium anode, which is a consumable material and is designed to effectively protect the inner surface of the tank and the heating element from corrosive changes. When thinning the anode to? from the original volume, a mandatory replacement is carried out. The heating element is able to last much longer if the so-called “dry” heating element is installed in the structure.

Water heater repair Ariston (video)

Ariston, a well-established manufacturer in the water heating equipment market, has been a leader for a long time and offers the consumer only high-quality and very reliable products in a wide range. And the presence of the largest network of service centers in many cities of our country allows you to easily receive qualified assistance, both in repair work and in the maintenance of water heating equipment.