Ariston water heater instruction. User manual (instruction) for the operation of the Ariston electric water heater

Simat water heater instructions for use

Turning on the water heater (water heater, boller.

Instructions / certificates.

Electric water heater - Wikipedia.

User's manual (instruction) for operation.

Specifications, principle of operation and functions.

Do-it-yourself boiler repair: video, photo, instruction.

Ariston | Ariston official website.

Water heater installation. Video instruction youtube.

Termex water heater models for 30, 50 and 80 liters.

Operating Instructions.

Water heaters to buy cheap in obi, heater prices.

Water heater reviews how to choose the best.

Buy electric storage water heaters.

How to disassemble a water heater ariston 10, 15, 30, 50, 80, 100.

Warranty repair.

Operating instructions for electric water heaters.

Ariston electric storage water heaters, buy.

Electric water heater vertical under the sink simat nts.

Reshebnik in mathematics grade 5 vilenkin.n.yaTeenage Mutant Ninja Turtles cartoon downloadNetwork controller driver for lenovoSale of exhibition samples of kitchen in StavropolReshebnik for RPS 4 class Kholodov 1 class part

Ariston sells dozens of models of water heaters with a capacity of 10 to 200 liters. They are reliable, durable and trouble-free. At least that's what the user manual says. However, not a single instruction for the Ariston boiler will help you choose your model.

Boiler Ariston ABS VLS PW 50

How to choose an Ariston boiler?

When choosing a water heater, try to consider the following parameters:

• Storage tank capacity
• Heating element power

The first parameter is selected based on the needs of the user. This takes into account the following proportion - 1 person \u003d 20 liters.

Therefore, count potential users, multiply the number by 20 liters, add 10-20% "in reserve" and start searching for your model, starting from this volume.

The second parameter is determined based on the thermal resistance of the housing and the volume of heated water. Simply put: it is determined by the boiler designers. However, from the user's point of view, there is only one rule: less is more. After all, the lower the power of the heater, the lower the electricity bill.

User manual (instruction) for the operation of the Ariston electric water heater

Therefore, having determined the required volume, choose the model with the lowest power of the heating element.

And now let's take a closer look at the most popular boiler models, dividing Ariston's product range into three groups:

• Water heaters for 1-2 users – up to 40 liters.
• Boilers for 3-5 users – up to 100 liters
• Storage heaters for 6-10 users – up to 200 liters

Popular boilers up to 40 liters

Kitchen boiler ARISTON PRO15 ST R/3

Designed to heat 15 liters of water.

Main advantages : small dimensions, allowing you to install a heater under the sink; flanged inlet to the tank, facilitating maintenance; safety thermostat.

Main disadvantages : small volume, due to which the boiler cannot be used in the bathroom; the absence of a power cord, which complicates installation - this boiler cannot be “plugged into an outlet”.

• Volume - 15 liters.
• Heating element power – 1.2 kW
• Heating time from 18-20 °С to 60-70 °С - 27-30 minutes.
• Price - 80-85 US dollars.

ABS PRO R 30 V Slim

Boiler Ariston 30 liters, designed for one user.

The main advantage of the model – low power consumption.

Main disadvantage – the ability to serve only one person. However this model covers all the needs of its owner, supplying hot water to both the kitchen and the bathroom.

Main characteristics:

• Volume of the tank - 30 liters.
• Heater power - 1.5 kW.
• Heating time – 1 hour 5 minutes.
• Water temperature – up to 70 °С.
• Price - 85-90 dollars.

Demanded models up to 100 liters

ARISTON SG 50

Boiler Ariston 50 liters, designed for a family of two. This model is completed with a reliable mechanical regulator and is calculated on water heating up to 75 °C.

The main advantage of the model - low price with decent quality.

Main disadvantage - inconvenient location of the temperature controller.

The main characteristics of the model:

• Storage tank volume - 50 liters.
• Heater power - 1.5 kW.
• Warm-up time up to 75 °С - 2 hours 10 minutes.
• Price – up to 75 USD.

ARISTON SG80

Mounted boiler Ariston 80 liters, designed for the needs of a family of three. However, installing a heater in the bathroom - to serve only the shower - makes it possible to increase the number of users to four people.

Main advantage - energy efficiency - the boiler has the lowest power in the heating element segment.

Main disadvantage – low rate of water heating.

Main characteristics:

• Tank capacity - 80 l.
• Heating element power – 1.5 kW
• Warm up time – 3 hours 40 minutes.
• Maximum water heating temperature – 80 °С.
• Price – 80 USD.

ABS VLS PW 80

Compact boiler Ariston 80-liter capacity, designed for hidden or open installation.

Easily serves the needs of a family of 3, and in the fast heating mode it can serve up to four users.

Main advantages - compact size and two heaters, accelerating the heating of water.

Main disadvantage - overpriced, explained by the use of an electronic control unit with automatic diagnostics and exclusive coating of the insides of the tank - AG +.

Main characteristics:

• Tank for 80 liters.
• Two heating elements for 1 and 1.5 kW.
• Tank warm-up time with one heating element - 3 hours.
• Tank warm-up time with two heaters – 1 hour 30 minutes.
• Water temperature – up to 80 °С.
• Price - 175-180 US dollars.

ARISTON SG 100

Budget boiler Ariston 100 liters, covering the needs of a family of 4-5 people. This water heater is equipped with a proprietary check valve and a magnesium anode. The control unit is mechanical.

Main advantage - low cost of the device. Moreover, the operation of the heater will also be relatively inexpensive.

Main disadvantage - prolonged warm-up.

Other features:

• Displacement - 0.1 m3 (100 liters).
• One heating element at 1.5 kW.
• Warm-up time – 3 hours 45 minutes.
• Water temperature – up to 75 °С.
• Price – up to 85 USD.

Boilers Ariston up to 200 liters

ARISTON ARI 200 VERT 560 THER MO

Water heater for 200 liters, serving 8-10 people. This boiler is made of the most environmentally friendly materials: there is no phenol in the heat insulator, the tank coating is free of nickel, and so on.

Main advantage - the maximum volume that covers the needs of not only at home, but also a cafe or a mini-hotel.

Main disadvantage – long time heating.

Water heater characteristics:

• Volume of the tank - 200 liters.
• Heating element power - 2.2 kW.
• Water heating time – 5 hours 30 minutes.
• Working temperature – up to 75 °С.
• Price - 290-300 US dollars.

ARISTON ARI 150 VERT 560 THER MO

Boiler for 150 liters, serving 7-8 people. Another semi-industrial boiler made from environmentally friendly construction materials.

Advantages and disadvantages match the model described above with a 200 liter tank.

Other features:

• Volume of the tank - 150 liters.
• Heating element power - 1.8 kW.
• Water heating time - 5 o'clock.
• Working temperature – up to 75 °С.
• Price – 280-285 USD

Ariston water heaters - principle of operation and advantages

The Italian brand Ariston is known throughout the world for its quality products and rightfully occupies one of the leading positions in the TOP manufacturers of household appliances. The company opened its representative offices in 150 countries of the world. The main products of the company are consumer electronics, gas and plumbing equipment, including water heaters.

Photo 1 Models of water heaters manufactured by Ariston

The principle of operation of a boiler (water heater) from Ariston

The principle of operation for all water heaters is the same. It is necessary to heat the water to a certain temperature using a heat carrier. The only difference is in the details:

• heating rate;
• power consumption;
• energy efficiency;
• cost of equipment;
• maintainability;
• installation and operating conditions.

Electric heating elements are most often used as a heater. They are of two main types:

A more practical option is to use dry heating elements.

not leaving scale during operation. You can buy such Ariston water heaters, starting from 7 thousand rubles. Popular models are ARISTONPROECO 80 VDRY, ARISTONPROECO 50 VDRY. Wet can be picked up from 4 thousand, for example, ARISTON SG 50 or ARISTON SG 100.

Photo 2 Boiler Ariston

The device heats the water to the set temperature, after which the thermostat turns off further heating. When the temperature drops below specified interval, the automation repeats the heating. In this way, the supply of warm water is maintained. Boilers allow you to adjust this temperature range.

When buying a boiler from any manufacturer, you must consider the place where it will be installed. The installation method can be both floor and suspended. To save space, the second option is preferable.

The functional difference between the heaters is the volume of the tank. It can be on average from 30 to 150 liters. But you don't have to pay for large volumes. If a family of three lives in a standard apartment, then an 80 liter tank will be enough for them. The most suitable budget model for this is Ariston SG 80 with vertical installation.

1 Installation and installation of Ariston water heaters

Electrical components of the Ariston water heater

Cheaper models of water heaters have one heating element each. But it is more profitable to purchase equipment with a couple of independent elements that you can start and turn off on your own.

Boilers with a pair of heating elements reduce the peak load on the wiring, and save electricity costs.

Electrochemical protection is installed on boilers to combat corrosion.

How to use the Ariston water heater?

For this, a sacrificial magnesium anode is mounted inside. less often it is zinc. During operation, the anode gradually dissolves and protects the tank with its particles.

Photo 3 Electrochemical protection

The thermostat control can be hidden.

But often they are used only for the initial setup of the entire device after installation. Then this adjustment is practically not used in everyday use.

Complete set, service, installation

When purchasing equipment, you must make sure that the maximum configuration of additional parts for installation. Otherwise, you will have to buy them yourself.

Important! At the same time with the purchase of the boiler, order an additional electrical cable that can withstand the load of the water heater.

Among other things, you will need a blast valve installed to manually relieve pressure before supplying water to the tank.

Immediately you need to stock up on fasteners for installation, water pipes and connecting elements for them. It is mandatory to install a coarse filter and autonomous power management.

Installation can be carried out by licensed specialists of the company. At the same time, the warranty obligation for the repair and maintenance of the device remains. Installation by third parties is allowed, but subject to the basic rules for safe operation:

• properly installed grounding;
• pressure parity cold water at the inlet with pressure on the heater;
• connection to the water supply with exclusively rigid pipes;
• free access to the device.

Advantages over competitors

Products fit perfectly into the formula for matching price and quality. Most often, negative reviews are obtained with improper installation and connection.

The main advantages of the company's boilers are as follows:

• fast enough heating of water;
• the possibility of using batch heating;
• additional cleaning of bacteria using the eco function;
• application of nanomix for economical filling of the tank;
• protective ag+ silver coating with antibacterial properties;
• use of magnesium anodes;
• a huge selection of shapes, colors and price categories.

The use of boilers with gas heating

Ariston gas boilers are separated into a separate SGA series. They operate with an open combustion chamber and conventional draft. Wall units are available in formats from 50 to 100 liters. For floor boilers, the volume of models has been increased to 200 liters. According to the power consumption, they are divided into industrial and household. Wall-mounted ones consume from 3 to 4.4 kW, and floor-standing ones up to 8.5 kW.

The maximum allowable pressure for the operation of gas boilers is 8 bar. The use of liquefied gas is allowed. Low gas pressure does not significantly affect the stability of operation.

Complete set of gas boilers Ariston:

• piezo ignition with flame signaling device;
• high quality thermal insulation;
• protective magnesium anode;
• safety block with gas valve;
• regulator and water temperature indicator.

Features of a gas boiler

It is possible to regulate the temperature in the range from 40 to 70 degrees. The tank is made of steel 1.8 mm thick and coated with high-strength enamel. The outer casing is made of steel. The device is adjusted and ready to work with gas pressure up to 13 mbar, corresponding to the Russian standard.

Photo 4 Ariston gas boiler diagram

Indirect water heaters

The company Ariston is engaged in the production of boilers with indirect heating. This principle of operation allows you to use simultaneously at several points of consumption. The work consists in the fact that a coil with a coolant is installed in the tank, passing through which the coolant heats the water in the tank.

The main series of this type are marked "BS 1S", "BS 2S", "BACD". The design can be different, and the volume of tanks varies from 150 to 500 liters. The tanks are coated with titanium enamel. It is possible to additionally install a heating element in such devices.

Devices marked "BS 1S" are connected to a gas carrier and are made in a floor version. Boilers "BS 2S" can be connected to a solar collector, and "BACD" are sold both in floor and wall versions. They also run on gas.

http://www.portaltepla.ru

The well-known Italian brand Ariston, which is a major manufacturer of consumer electronics, is well known and loved by Russian consumers. The long history of the company, which began with simple business Italian family, once again testifies to the popularity and recognition of the brand far beyond Italy. The Ariston Margarita 2000 washing machine is practicality, reliability and durability. It is intended, first of all, for people who value simplicity and stability.

Overview of technology, a set of functions and programs

The ariston Margherita 2000 series includes several models of washing machines. All of them have great functionality, have high performance in terms of the quality of washing clothes, rinsing and spinning them. Each new model of the machine in this series is a more advanced version of its predecessors. The machines belong to economical devices by the amount of energy and water consumed during operation.

The most popular Margherita 2000 models are als88x and als109x. They differ little from each other. They have different years of production, the als109x automatic machine is a little newer. It has all the qualities of its predecessor, but there are some differences. In the newer model, the manufacturer has increased the amount of laundry allowed to load from 5 kg to 6 kg. Max Speed spin speed also increased from 800 rpm. up to 1000. The dimensions of the equipment itself remained the same - 85cm * 59.5cm * 40 cm.

A distinctive feature of Ariston Margherita 2000 is the possibility of high-quality washing even at a temperature of 40°C. The presence of the Cashmere Gold program, which allows you to wash woolen products marked “hand wash only” at low drum speeds (90 rpm), also distinguishes this device from other brands. When using it, the fibers of the fabric are not destroyed and do not deteriorate even during rinsing.

The control panel is quite simple. On the left is a compartment for detergents, on the right is a switch and program start, buttons for basic and additional functions, door lock indicators, and an on / off button for the washer.

The detergent dispenser has a semicircular shape and is divided into four compartments. Above it is the key to the programs. It contains a description of the washing programs and button functions. This is very convenient, since the user does not have to look at the instructions for the device every time before use.

Number of washing modes - 9. Class A at 40°C and daily wash are additional programs.

Specifications

Ariston Margherita 2000 is a free-standing model of the machine, with the possibility of embedding. It has a front loading type. Maximum amount loaded linen - 6 kg. There is a system of protection against leaks Menalux. Additional functions of the technique include the “Hand wash wool” function, which is described above. The delayed start option allows you to delay the start of the program by 1, 6, 9 or 12 hours.

The weight of the machine is 67 kg. The base color of the case is white. The manufacturer's warranty is 1 year. Energy efficiency and washing class - A. Spin class - D.

Before installing the machine, you should definitely read the instructions, which contain diagrams and detailed descriptions how to connect the device correctly.

The manufacturer assures that the correct installation of equipment and its appropriate operation will extend the service life for years.

Advantages and disadvantages

The advantage of technology is its capacity, with small sizes, optimal set of programs, simple operation. Such a machine will be easy to use even for the older generation.

The advantages include greater savings in energy resources, relatively low level noise emitted during operation.

But the lack of some important options, such as child lock, is a minus.

Water heaters Ariston 80 liters - user manual

The appearance of the washing machine is quite simple and boring. The manufacturer also did not finalize this.

User Reviews

Katya, Yekaterinburg

Very roomy and compact design. Prices for it in stores are quite acceptable for the average person. For more than 10 years of use there were no breakdowns. Therefore, reliability and durability are pluses.

The downside is the lack of an electronic scoreboard from which you can track all the washing cycles. A child lock would also be nice.

Ivan, Tyumen

We bought a washing machine 15 years ago. Over the years, it turned out that the technique is simply not killed. When working, it does not make loud sounds, the programs have never gone astray. The buttons, however, have faded over time. But this is a trifle. But the fact that it began to rust is already a problem. Although, this is more likely from improper operation than a defect of manufacturers. In general, I am satisfied with the washer, I think that it will last a couple of years.

George, Samara

The technique easily copes with its main task. Washes things perfectly, does not leave stains. But it rumbles and makes noise in the spin mode. There is always water in the bleach and rinse compartment, which must be wiped off after each cycle.

Inna, Moscow

I have been using the Ariston Margarita machine for about five years. The absence of breakdowns is the main proof that it is really reliable. It is very pleasing that it is possible to independently select the water temperature and the number of revolutions during the spin cycle. It holds a lot of things, while this does not affect the result of the work. The design is a bit simplistic. But for technology, this is not the main thing.

The result of the review will be the following conclusion: "Ariston Margarita" is an Italian classic, tested over the years by thousands of Russian users. The fact that the units work up to 10 and over years only confirms the build quality of the Ariston equipment - perhaps this will help you in choosing a washing machine.

Ariston, brand, Margarita 2000, machine, model, disadvantages, review, reviews, advantages, washing, functions

Certificate of Conformity TS RU C-IT.AYA46.V.70803

Electric water heaters of the trademark "Ariston" models: (see Appendix - forms No. 0221821, 0221822)

Information from the registry:

Chapter: Certificate of conformity of products to the requirements of the technical regulations of the Eurasian Economic Union

Registration number of the certificate of conformity: TS RU S-IT.AYA46.V.70803

Certificate validity start date: 03.08.2015

Certificate expiration date: 27.01.2018

Submitted documents: Application No. 116-220 / TRTS dated 06/29/2015. Typical representative - Electric water heater of the Ariston trademark, model: ABS Pro 15, ABS VLS PW 100

Reason for issuing the certificate: Test reports No. 58/15, 59/15 dated 01/21/2015. Testing laboratory of technical equipment for electromagnetic compatibility parameters of the Federal budget institution"State Regional Center for Standardization, Metrology and Testing

Applicant type: foreign legal entity

Type of applicant: Manufacturer

Full name of the applicant:"Ariston Thermo SpA", (A person authorized by the manufacturer: Limited Liability Company "Ariston Thermo Rus".

Home master: water heater Ariston 80 liters instruction

Contract No. b/n dated XX.XX.XXXX OGRN: XXXXXXXXXXXXX, Information on state registration: Registered by the Inspectorate of the Ministry

Applicant's location address:

Applicant phone number: +0732603609

Fax number of the applicant: +0732628200

Address Email applicant: [email protected]

Manufacturer type: entity

Full name of the manufacturer: Ariston Thermo SpA

Manufacturer's location address: ITALY, Fabriano (AN), Viale A.Merloni, 45 CAP 60044

Certification object type: serial production

Product Type: Imported

Full product name: Electric water heaters of the Ariston trademark

Information about the product (type, brand, model, grade, article, etc.) providing its identification: models: (see Appendix - Forms No. 0221821, 0221822)

Code according to the Commodity Nomenclature for Foreign Economic Activity (TN VED): 8516108000

Technical regulation: TR TS 004/2011 "On the safety of low-voltage equipment"; TR TS 020/2011 " Electromagnetic compatibility technical means"

Number of application form to CC for the manufacturer's table: 0221823

Full name of the manufacturer (Appendix):"Ariston Thermo SpA";"Ariston Thermo SpA";"Ariston Thermo S.p.A.";"Ariston Thermo Benelux S.A/N.V. Legal”;Limited Liability Company “Ariston Thermo Rus”;”Ariston Thermo (China) Co., Ltd”;”Racold Thermo Ltd.”;”Ariston Thermo Vietnam”;”

Manufacturer's location address (Appendix): ITALY, Strada Provinciale Frasassi 60040 GENGA (AN) Namur Malonne (B) N Entreprise-Ond

The number of the application form to the SS for the product table: 0221821, 0221822

Product Table (Appendix):

Full name— Electric water heaters brand "Ariston"
- models: ABS PRO 15, ABS VLS PW 100, ARI 200 STAB 560 THER MO VS EU, ARI 300 STAB 560 THER MO VS EU, ARI 200 VERT 530 THER MO SF, CHX 10 PL, CHX 10U PL, CHX 15 PL, CHX 15U PL, CHX 30 PL, ANDRIS R 10 PL, ANDRIS R 10U PL, ANDRIS R 15 PL, ANDRIS R 15U PL, ANDRIS R 30 PL, BLU EVO R 10 PL EU, BLU EVO R 10U PL EU, BLU EVO R 15 PL EU, BLU EVO R 15U PL EU, BLU EVO R 30 PL EU, PRO R 120 V 2K CZ EU, PRO R 150 V 2K CZ EU, VLS 50 EU, VLS 80 EU, VLS 100 EU, PRO R 120 V 1.8K PL EU, PRO R 150 V 1.8K PL EU, PLT ECO EVO 50 V 1.8K PL EU, PLT ECO EVO 80 V ECO EVO 120 V 1,8K PL EU, PLT R 120 V 2K EU, PLT R 150 V 2K EU, VLS 50 EU, VLS 80 EU, VLS 100 EU, VLS INOX 50 EU, VLS INOX 80 EU, VLS INOX 100 EU , NTS 120 2K EU, PLT R 50 V 2K EU, PLT R 80 V 2K EU, ABS VLS EVO PW 30, ABS VLS EVO PW 50, ABS VLS EVO PW 80, ABS VLS EVO PW 100, ABS VLS EVO QH 30, ABS VLS EVO QH 50, ABS VLS EVO QH 80, ABS VLS EVO QH 100, ABS VLS EVO PW 30 D, ABS VLS EVO PW 50 D, ABS VLS EVO PW 80 D, ABS VLS EVO PW 100 D, ABS VLS EVO QH 30 D, ABS VLS EVO QH 50 D, ABS VLS EVO QH 80 D, ABS VLS EVO QH 100 D, ABS VLS EVO INOX PW 30, ABS VLS EVO INOX PW 50, ABS VLS EVO INOX PW 80, ABS VLS EVO INOX PW 100, ABS VLS EVO INOX QH 30, ABS VLS EVO INOX QH 50, ABS VLS EVO INOX QH 80, ABS VLS EVO INOX QH 100, ABS VLS EVO INOX PW 30 D, ABS VLS EVO INOX PW 50 D, ABS VLS EVO INOX PW 80 D, ABS VLS EVO INOX PW 100 D, ABS VLS EVO INOX QH 30 D, ABS VLS EVO INOX QH 50 D, ABS VLS EVO INOX QH 80 D, ABS VLS EVO INOX QH 100 D, REG 10 EU, REG 10U EU, REG 15U EU, REG 30 EU,
TN VED codes — 8516108000

Information about the product, providing its identification— SIMAT 15U/5 EU, SIMAT 30/5 EU, CHX 10 PL EU, CHX 10U PL EU, CHX 15 PL EU, CHX 15U PL EU, CHX 30 PL EU, ANDRIS RS 10/3 EU, ANDRIS RS 10U/3 EU, ANDRIS RS 15/3 EU, ANDRIS RS 15U/3 EU, ANDRIS RS 30/3 EU, ANDRIS LUX ECO 10/5 EU, ANDRIS LUX ECO 10U/5 EU, ANDRIS LUX ECO 15/5 EU, ANDRIS LUX ECO 30/5 EU, ANDRIS R 10 PL EU, ANDRIS R 10U PL EU, ANDRIS R 15 PL EU, ANDRIS R 15U PL EU, ANDRIS R 30 PL EU, ANDRIS LUX ECO 15U/5 EU, SHP PREMIUM 50 V 1,8K EU, SHP PREMIUM 80 V 1,8K EU, HP PREMIUM 100 V 1,8K EU, SHP PREMIUM 50 V Slim 1,8K, SHP PREMIUM 65 V Slim 1,8K, PRO ECO EVO 50 V 1,8K PL EU, PRO ECO EVO 80 V 1,8K PL EU, PRO ECO EVO 100 V 1,8K PL EU, SHP ECO EVO 50 V 1,8K EU, SHP ECO EVO 80 V 1,8K EU, SHP ECO EVO 100 V 1,8K EU , PRO R 100 VTD 1.8K EU, PRO R 100 VTS 1.8K EU, PRO R 50 V 1.8K PL EU, PRO R 80 V 1.8K PL EU, PRO R 100 V 1.8K PL EU, BLU R 50 V 1.8K PL EU, BLU R 80 V 1.8K PL EU, BLU R 100 V 1.8K PL EU, SHP ECO EVO 65 V 1.8K EU, CHX 50 R PL EU, CHX 80 R PL EU , CHX 100 R PL EU, PRO R 80 H 1.8K PL EU, PRO R 100 H 1.8K PL EU, ARI 200 VERT 560 THER MO EU, ARI 200 VERT 530 THER MO EU, PRO R 150 VTS EU, PRO R 200 VTS EU, CHA 150 VERT 530 STEA MO EU, CHA 200 VERT 530 STEA MO EU, CHA 150 VERT 530 THER MO EU, CHA 200 VERT 530 THER MO EU, CHA 300 STAB 560 THER MO EU, ABS ANDRIS LUX 10, ABS ANDRIS LUX 10U, ABS ANDRIS LUX 15, ABS ANDRIS LUX 15U, ABS ANDRIS LUX 30.
TN VED codes — 8516108000

Full name of the Certification Body that registered the certificate: Certification body "ROSTEST-Moscow" CJSC "Regional body for certification and testing"

Certificate number of the certification body: RA.RU.10AYA46

Legal address of the certification body: 119049, Russian Federation, G.

Moscow, st. Zhitnaya, 14, building 1

Address of the location of the certification body: 117418, Russian Federation, Moscow, Nakhimovsky prospect, 31

Date of registration of the certificate: 27.04.2015

Phone number of the certification body: +74956682715,+74991291911

Fax number of the certification body: +74991249996

E-mail address of the certification body: [email protected]

Surname Name Patronymic of the expert: Kruglova Olga Nikolaevna

EVN Ariston - Installation and use

Proper installation and connection of Ariston storage water heaters for 15, 30 and 50 liters

Model range: Ariston Velis 50, Andris lux 30, Andris lux 15 ur

For independent connection of electric water heaters, the first thing to do is to choose a place and install it. Most often, these devices are placed in the bathroom or in the toilet.

Please note that EWH for 50 liters or more takes up considerable space. The closer the device is to watershed points, the less heat loss.

Installation

Of course, the easiest way to install a floor water heater. All you need to do is choose a location. If the floor covering has defects, it is recommended to level the floor in advance (pouring a screed or laying a tile).

Installation of wall-mounted boilers takes place in several stages:

First, mark up the fasteners. To do this, you will need to measure the distance between the openings for the hooks on the back of the device. Markings can be done with a pencil, using a building level. Using a puncher, drill holes for the fasteners. Anchors can be used as fasteners. Fasteners are selected based on the mass of the boiler. For small EWHs, 10mm anchors are quite suitable, for 30-liter ones, 12-millimeter ones are used.

Water supply

The next stage is the connection to the water supply. First, think over the scheme, draw it on paper, and then transfer it to the wall. Drill holes along the entire length of the pipes and install clips. Turn off the tap at the water inlet, a tee is installed on the branch closest to the electric water heater. A pipe is drawn from it to the device. A tap must be installed on the pipe, for ease of maintenance, a strainer and a check valve.

Next, bring a flexible hose to the EWH and connect it to the branch pipe. Most often, input is indicated in blue. Similarly, a branch is drawn to the watershed point. Experts do not recommend connecting without a hose. It is not only beautiful, but also reliable. When jumps pressure, the entire blow will fall on the tank.

After you connect all the nodes, open the taps and check all connections for leaks. If a leak is found, then reconnect or add more tow to the threads.

Electrical connection

At this stage, it is also very important to think over the scheme correctly. To connect less powerful models of Ariston water heaters for 15 and 30 liters, it is allowed to use moisture-resistant sockets, while powerful devices must be connected with a separate wire, which is output to the machine.

How to turn on the water heater "Ariston"?

It is very important to use 3-core copper wires with a cross section of at least 2.5mm. Moreover, to protect against breakdowns on the wire, it is recommended to install an RCD.

Then remove the plastic cover of the boiler and connect the wire according to the marking. Then bring the wire in plastic boxes to the electrical panel and put it on the machine. The final stage is to check the performance of the connected Ariston water heater. Open the valves and turn on the electricity.

Turning on the Ariston boiler after installation

For the initial start-up of the device, it is necessary to carry out a number of actions: Before the first start-up of the boiler, fill the tank, for this you need to turn off the hot water supply tap on the riser, then open the water supply valve at the outlet of the electric water heater. Turn off the hot water valve and bleed the air from the tank. As soon as water flows, you can close the valve.

Visually inspect pipes for leaks. After that, set the temperature with the thermostat, the most optimum temperature 60-65 degrees, this will maximize energy savings and will contribute to minimal scale formation. Next, you can connect the boiler to electricity, after which the light will turn on.

The time during which the 50-liter Ariston Velis EWH tank is completely heated is about two hours. After this time, the device will be ready for operation. Follow for half an hour and see if the fluid is heating up.

Fill the container with water. You learned how to do this correctly above, using the example of the 1st option. Connect the device to the mains. Set the time by pressing the plus and minus buttons, the transition from hours to minutes is done by pressing the set key.

The next steps for the conversion electric water heater: use the on / off keys to turn on the boiler, pressing plus and minus, set the most comfortable temperature, from 40 to 80 degrees, the manufacturers set an acceptable temperature of 70 degrees. The indicator on the monitor will come on when the water reaches the set temperature.

Water heater with digital monitor. If you install the device in a horizontal position, then in order to change the monitor location to horizontal, you need to simultaneously hold down the “mode” and “eco” keys and hold for several seconds. Starting is done with the on/off button.

Next, you will need to select 1 of the 4 modes with the “mode”-MANUAL button (in this mode, you yourself set the desired heating by pressing the “set” key) or P1 (start heating at 9 am at 70 degrees), P2 (start at 7 pm at 70 degrees), P1 + P2.

Ariston sg 30 or

How to start the electric water heater Ariston sg 30 or. To do this, you will need to perform a number of such actions: Fill the device with water. Next, check all joints and connections for leaks.

Turn on the boiler by pressing the button on the device. Set the temperature by turning the regulator, the most acceptable position is “E”.

How to use the storage water heater Ariston

In the configuration of each device there is an instruction manual, but most often everything is written there in technical terms and it can be difficult for a person who is far from this to understand what it is about.

launch

After inspecting the inlet pipe to the boiler, find the check valve. If the pressure is higher than normal, water will ooze out of it. That is why you should install a basin under it, or bring a hose into the sewer.

Pick up a tank. To do this, open the valve for inlet and outlet of liquid from the boiler. Rotate the valve knobs 90 degrees counterclockwise. Open the hot water valve. Now you need to wait a bit until the tank is full. If water begins to flow out, it means that the device is full. It is recommended to visually inspect all pipes for leaks. If you find a leak in some place, turn off the water and call the master to fix the problem.

Connecting the boiler to the electrical network. All that is required is to insert the plug into the socket or turn on the machine, to which the electric cable is connected. The machine is located near the location of the water heater or in the switchboard. Set the desired water temperature. Experts advise setting 60 - 65 degrees. higher temperatures I contribute to the accumulation of scale, and at lower temperatures, harmful bacteria multiply. The temperature can be set using a mechanical knob, as in the Ariston SG 30 OR models, or with the keys on the panel, as in the VELIS EVO PW models. In principle, this is all, now you need to wait until the device heats the water. For maximum comfort, you can mix hot water from the boiler with cold water from the tap, while obtaining the desired temperature.

Water heating

Based on the volume of the tank 30, 50 or 80 liters, the initial heating time will be different. It will take approximately 1 hour to warm up a 30-liter tank of Andris lux 30 to 65 degrees, a 50-liter tank of a VELIS boiler will take a little more - 2 hours, and a tank of 80 liters will heat up in 3 hours.

The time for which the heating will take place also depends on the heat of the incoming water and the power of the boiler. So, for example, in winter period the incoming liquid is icy and, accordingly, it takes a little more time to heat up.

Water heaters with powerful heating elements heat water much faster, but consume large quantity electricity.

Use of the shower and bath

For such purposes, Ariston TI TRONIC INDUSTRIAL for 300 liters is perfect.

To be sure that there will be residual water, you can set the thermostat to the maximum value. Showering uses significantly less water.

How does an Ariston storage water heater work?

How is water heated

How does a water heater work? Inside the device there is a tank in which there is a heating element. The principle of operation of EVN. Cold water enters the electric water heater from the central water supply. There are 2 tubes in the tank - one of which is designed for cold water supply, equipped with a divider for constant heating (located at the bottom). The second tube for the intake of hot water (located at the top).

The time of full heating depends on the volume of the tank (from one to five hours). The desired temperature is set individually, using a thermostat (it can be mechanical and electronic, the latter shows a more correct temperature), the maximum temperature is 75 degrees.

After the EWH reaches the set temperature, the device turns off by itself, the temperature is maintained constantly while the device is connected to the mains, it does not matter if the water was flowing or it just cooled down. The water in the tank does not mix due to the fact that the incoming cold liquid displaces the hot liquid up.

The mechanism responsible for heating water is called a heating element. Based on how many liters your water heater depends on the number of heating elements (there can be from one to six) and their power. If the device has two heating elements, then you can reduce the load and use the device in economy mode.

For example, for fifteen-liter devices, one heating element with a power of 1.2 kilowatts per hour is quite enough; in 80-liter ABS VLS EVO PW 80 models, two heating elements are installed, the power of which is 2.5 kilowatts per hour. The time for which the electric heater heats up depends on the power of the heating elements.

Why thermal insulation is needed

The Ariston electric water heater is a tank, it can be enameled or silver-coated (in expensive models), the body is closed. The service life of enameled steel tanks is longer, and the formation and accumulation of scale is much less.

To maintain the heating temperature, there is a heat-insulating layer between the tank and the body. Foamed polyurethane or foam rubber is most often used for thermal insulation.

Heat loss in fifty-liter EWH is about 12 degrees in 24 hours. This is subject to good thermal insulation, if the outside of the tank is warm, this indicates that the thermal insulation is very weak, and heat loss occurs. When you open the hot water valve, it comes out of the appliance, in order to adjust the temperature, open the cold water and equalize.

___________________________________________________________________________________________

___________________________________________________________________________________________

___________________________________________________________________________________________

Thermex water heaters
What should be done if the Termex boiler starts to leak? In each model, the causes of leakage may be different. If you have a Safedry EWH with a dry heating element in operation, then one of the reasons ...

Ariston water heaters
Malfunctions that you may encounter when using the Ariston storage water heater: The heater may not start; Drain valve…

Water heaters Edisson
The set temperature is 70 degrees, it also shows about 70. When the consumption is on the display, the temperature decreases, the heating turns on. That is, as a full-fledged work. And the real...

water heater Haier
When supplying previously disconnected hot water, hot water went through the blast valve, practically in a jet. The secant valve on the main line was opened and…

Zanussi water heaters
Electric water heater Zanussi 80 liters. Is the operation affected by low inlet water pressure or weak electrical voltage? EVN can perform…

AEG water heater
Electric water heater AEG EWH 50 Comfort EL in operation. What influences the temperature of water heating? Which one is better to show? The first thing that affects...

Water heaters Electrolux
He installed and connected the Electrolux EWH 80 Royal Flash electric water heater, the last time the heating element was changed more than three years ago. In general, we have been using them for about five years. There was…

Water heater Polaris
I start the storage water heater Polaris Ultra IMF 50 V, it heats up to a certain temperature and turns off completely. Previously everything was fine, heated ...

Proper use of the boiler determines the durability of the device and its smooth operation. You need to know how to turn it on correctly to start the system, and how to turn it off to save electricity.

The installation of the Termex water heater is carried out by professionals, and you will have to turn it on yourself. But you need to know exactly how to perform this action correctly so that the device does not fail. The flow is switched on according to the usual scheme: air is released, hot water is shut off, the necessary settings are set, and the system is turned on. The main difference between a flow boiler and a storage boiler is in the time of heating water. The first option requires only 5-15 seconds, and the second - 2.5-3 hours.

Steps to turn on the water heater:

1. The shut-off valve on the hot drain is blocked.
2. Air is being released. First, the faucet is opened hot water and then cold. The air is determined by a torn stream, when the water is intermittent, and the faucet itself can “snort”.
3. When the water begins to flow calmly, all taps are closed. The boiler is connected to the network.
4. Before the connection itself, it is necessary to set the required temperature.

The performance of the boiler is checked on the panel. Indicators, temperature are checked. If everything is in order, then after 15-20 minutes the temperature will begin to rise.

But there are times when the connection is quite problematic and the water heater does not turn on. In this case, electricity networks, sockets and other elements are first checked. Also, the cause may be a broken cable, which is checked with a tester.

How to use the water heater "Ariston"

Special difference in connection storage systems No. The Ariston boiler is similar to connecting other devices. Let's take a closer look at each successive stage.

The sequence of connecting the water heater "Ariston":

1. It is necessary to close the hot water supply with shut-off valves.
2. It is necessary to open the tap at the installation site of the unit and drain the water from it. After that, you need to close the tap.
3. Air is vented from the water heater. To do this, first open the tap at the inlet (marked in blue), then the hot water tap (marked in red). After the air is released, when the jet becomes even, it is necessary to close the hot water tap.
4. The tap with cold water does not close, as its supply is regulated automatically.
5. The boiler is connected to the mains, and the temperature parameters are adjusted.

After completion of work, it is necessary to check the performance of the unit. When the panel is turned on, the temperature starts to increase. If this does not happen, then the water heater was connected incorrectly or the boiler broke down.

About the repair of water heaters, our following material:

When the boiler was turned on for the first time, it must be given time to warm up the water to the maximum temperature. Open the faucet on the faucet and check for leaks. If they are absent, then you can safely use the water heater.

The instructions for using the boiler regulate the correct operation of the device. It is important to follow all its instructions.

After switching on the device, it is necessary to set the required temperature. Usually these parameters are determined by three modes: 35, 55 and 75 degrees. In some models, you can set the temperature to 10 degrees. This mode is called "antifreeze".

Tips for using the boiler:

1. It is not necessary to connect the water heater when there is no water in the tank. This will cause damage to the heating element. The safety valve is equipped with a check valve, which must be checked once a year.
2. Setting the temperature depends on the wishes of the owner, but once every 2 weeks it is necessary to turn on the maximum temperature for a couple of hours. This will prevent the reproduction of pathogenic microflora.
3. Cold water should be filtered with a strainer. Depending on the characteristics of the water, additional treatment plants are installed.

Flow boilers are also easy to operate. Turning on the device begins with unscrewing the tap with hot water. The temperature is pressure controlled.

The boiler is quite an expensive device. Every owner will know about this when it comes time to pay for electricity. That is why there are a number of recommendations for saving electricity.

Rules for the budget use of the boiler:

1. There is no need to turn off the water heater if you need hot water all the time. When the boiler keeps a constant temperature, it takes less energy than it takes to heat it up every time.
2. If hot water is needed less than a couple of times a day, then it is better to turn off the boiler.
3. Some models have an economy mode.

Expert advice will help you choose the right model:

But most importantly, you need to save water itself. It doesn't need to flow unnecessarily. Heating is fast enough, and closing the tap for a few minutes during the procedures will save.

How to turn on the boiler immediately after installation (video)

Installed boiler in the apartment - an indispensable thing. It does not matter whether the water heater will be instantaneous or storage, since the start-up is not fundamentally different. At the same time, it is important to use the device economically and observe all operating rules.

An analysis of sales of the domestic market for water heating equipment shows that the undisputed leader here is the products of the Italian company Ariston. Consistently high quality, reliability, ergonomic design - that's what attracts consumers to the products of this company. Among the many models, the most popular are Ariston 100 l water heaters, since they are able to satisfy the daily need for hot water for a family of 3-4 people. It consists of a body and a tank covered with insulating material, as well as a heating element and control devices (thermostat, control unit).

The manufacturer, among others, manufactures installations that have a volume of 100 liters. Basically, these are storage-type electrical devices that are used to heat water in apartments, private houses and other premises connected to the mains. They are presented in the following series:

1. Ariston ABS Velis (QH, INOX QH, POWER, INOX POWER, PREMIUM).

The abbreviation ABS means that all models are equipped with the Absolute Bodyguard System - a residual current device. In the event of power outages, water leaks or problems with the pressure valve, the system blocks the operation of the device, making it absolutely safe. The main difference between Velis 100 V and other series of units is that they are equipped with 2 internal independent tanks, in which it is installed according to the heating element.

This allows you to get water heated to 45 ° C already 53 minutes after switching on. Both tanks are internally treated with a layer of AG+ (plating with silver content), which contributes to the protection of the body from corrosion. The wall-mounted storage electric water heater Ariston Velis can be mounted on the wall in any position: vertical or horizontal. A digital display with programming function is installed on the front panel of the boilers.

2. Electrical overview Ariston water heater ABS PRO R 100 V indicates that the unit is equipped with a tank made of cold rolled steel. Its surface is coated on the outside with a layer of finely dispersed enamel, which provides protection against leakage and corrosion. The Ariston ABS PRO-R 100 electric water heater is equipped with an on / off indicator, a reliable mechanical thermostat and a heating scale displayed on the outer panel of the device. In addition, it has a special magnesium anode that protects the heating element from premature wear.

In the production of a metal tank of a 100 l Ariston ABS PRO ECO 100 V storage water heater, a special welding technology (microplazmatig) is used, due to which high strength and durability of the seams are achieved, and the boiler is able to withstand pressure drops up to 15 atmospheres. Silver-derived ECO coating neutralizes harmful chemical elements. The unit is equipped with an electric thermometer that allows you to monitor the operation of the boiler in real time, ensuring constant temperature control.

1. Ariston ABS Blu.

The devices in this series are model lines R and ECO. The description of the Ariston Blu R100V vertical water heater suggests that this modification is equipped with a simple mechanical thermostat. The storage tank is covered with a protective layer of polyurethane on the outside, which contributes to the fastest possible heating. The walls of the tank are covered with a protective layer of Ag+ from the inside. Another model - BLU ECO POWER 100V, is equipped with an electronic thermostat and a digital display. It is intended for the accelerated heating of water.

The series includes compact boilers TI TRONIC, TI TECH and TI SHAPE. Ariston TI TRONIC is a high-quality water heater equipped with a mechanical device for temperature control. The inside of the container is treated with Titanium + technology, which provides it with protection against rust formation. The Ariston TI TECH QB 100V compact water heater device is equipped with a simple thermostat, but it has more power and heats the water faster to the desired temperature.

3. Ariston Perla.

This is a type of heating devices that combine 2 heating methods. For example, the technical characteristics of the Ariston PERLA 100 VRDT / 5 combined water heater are such that, thanks to the heat exchanger built into the tank, it can function as an indirect heater during the heating season. Then a 1.5 kW heater makes it possible to use it as an electric boiler, for this it is only necessary to turn off the tap connecting the installation to the heating system.

Models of this series also belong to the combined type and are equipped with two types of heaters: a heat exchanger and a heating element. In addition to the main thermostat, the SG R 100 LTDTS has an additional one, which makes the work completely safe.

In addition to the above electric heaters, Ariston also produces units with a tank volume of 100 liters, powered by another source of energy - gas. However the lineup of such installations is limited to SGA products. Gas installations have natural draft and an open combustion chamber, which makes it possible to obtain heated water regardless of the pressure in the gas and water supply system. In addition, they are equipped with a piezo ignition device with a built-in thermocouple that controls the flame. Modification of the wall-mounted boiler SUPER SGA is used for domestic and industrial needs.

Technical characteristics of water heaters with a tank of 100 liters

Series	Model	Indicators
		power, kWt	Voltage, V	Working temperature, °C	Pressure, bar	Water heating time up to 45 °C, min	Dimensions, mm	Weight, kg
Velis	QH,INOX QH	1,5+1	230	80	8	first tank - 53, second - 139	1275x490x270	30
	POWER, INOX POWER	1,5+1		80		First tank - 91, second - 139
Pro	R	1,5		75		206	913x450x480	26
	ECO	1,5		80		232	1338x450x470	26
blu	R	1,5		75		232	913x450x480	26
	ECO POWER	2,5		80		130	1338x450x470	29
TI	TI TRONIC	1,5		80		232	913x450x480	26
	TI TECH QB	2,0		75		170	963x493x499	34
PERLA	100 VRTD/5	1,5		80		232	913x450x480	25
SG	SG-R100L/RTDTS	1,8		80	6	175	904x450x470	35
SGA	SUPER SGA	4,4	—	45	8	71	950x495x510	35

Advantages and disadvantages

The positive qualities of Ariston boilers include:

• Rapid heating of the required volume of water.
• Processing of tanks using AG+ and Titanium+ technology.
• ABS system, which protects installations from breakdowns associated with power surges, leakage, and so on.
• Simple, reliable mechanical and electronic thermostats that allow you to achieve the most accurate control with an error of no more than 1 °C.
• Possibility of use at low pressure in the water supply system.
• The ECO function provides water purification from harmful chemical elements.
• With all the technical innovations used in the manufacture, the price remains affordable for any category of consumers.
• Warranty period from 5 to 10 years.

Judging by the reviews, the water heater is not without drawbacks:

• The load on the power grid increases by an average of 1-1.5 kW.
• When the power is turned off, such equipment will not work.
• The kit does not include brackets for wall mounting, flexible hoses for inlets, and a condensate drain pipe.

How to install an Ariston water heater

According to the instructions, the Ariston electric storage boiler should be installed in dry, warm, well-ventilated areas. This process takes about 2 hours and consists of the following steps:

1. Using a perforator, holes are drilled in the wall for anchors, on which the water heater is hung.

2. With flexible hoses, it connects to the water pipe. As a rule, the cold water inlet is marked in blue. It has a pressure relief valve. The red outlet is connected to the hot tap. Tow is wound on all joints.

3. Taps are opened and all connections are checked for leakage.

4. Using the connector, the device is connected to the mains. The contact on the water heater terminal, marked with the letter L, means "phase", with the letter N - "zero", yellow grounding is marked.

In the event of problems during operation, it is better to entrust the repair of the Ariston boiler to a specialist by contacting an authorized service center.

Such offices are open in all major cities of Russia. Self-repair can lead to damage to expensive components and removal from warranty service.

Price

Average prices in rubles in Moscow are different and depend on the series and model of the boiler. The cheapest TI Shape 100 V installation costs 4,800 - 5,660. Moreover, it is worth noting that the price of an Ariston TI Shape 15 UR water heater, equipped with a much smaller tank (only 15 liters), is not much less - 4,100 - 4,500.

• Model ABS Blu R 100 V will cost 5,900 - 7,000.
• You can buy Ariston ABS PRO ECO 100 V for 7,100 - 8,600, ABS Pro-R 100V is somewhat cheaper - 5,800 - 8,380.
• The cost of a 100-liter quick heating water heater Ariston Velis is 12,700 - 14,910.
• Installations of the combined type Perla 100 VRTD / 5 will cost an average of 9,440 to 10,400.
• The most expensive are gas-powered units SGA-17,100 - 1,9,700.

The presence of an autonomous water heating system provides not only comfortable living, but also independence from the whims of utilities. The performance of such systems, their efficiency and safety depends on specifications boiler "Ariston", connection diagrams and quality of installation.

The key to a long and trouble-free service is compliance with all operating rules and timely maintenance. Ignoring the requirements prescribed by the manufacturer can lead to premature failure of both individual parts of the boiler and the entire product as a whole. In addition, the possibility of electric shock increases many times over.

The instruction manual contains all the necessary information regarding the installation, connection, conditions of use and the frequency of maintenance of the Ariston storage water heater. In addition, the document includes a list of the most common problems and a method for fixing them yourself, however, for effective solution problems will require knowledge of the design and basic principles of operation of the product.

The device and principle of operation of the water heater "Ariston"

A modern Ariston boiler for 30, 50, 80 and 100 liters is a hermetic structure consisting of the following parts and assemblies:

1. storage tank:
2. Electric heating element (TENA);
3. Magnesium or zinc sacrificial electrode;
4. Tuning and control unit;
5. Casing.

The inner surface of the tank must undergo anti-corrosion treatment. Depending on the cost of the product, various modifications may have as anti-corrosion protection:

• Titanium coating;
• glass-porcelain coating;
• A layer of heat-resistant enamel resistant to aggressive compounds.

In addition, expensive water heater models from the premium manufacturer Ariston can have all-metal welded storage tanks made of alloyed stainless steel.

The air gap between the casing and the inner container is filled with a polymeric heat-insulating composition (most often, polyurethane foam). Thermal insulation allows you to noticeably slow down the cooling process, thereby reducing energy consumption.

Heating elements are divided into two main types: "wet" and "dry". Wet are called heating elements that come into direct contact with the heated liquid. In the process of interaction with the working environment, a persistent coating of insoluble scale is formed on the outer surface of the heating element, which prevents normal heat transfer. A zinc or magnesium anode is used to protect the heating elements and the inner surface of the tank from corrosion damage.

The functionality, informativeness and ergonomics of the water heater from the company "Ariston" largely depends on the design and design of the control unit and settings. There are two types of control mechanisms: electronic and mechanical. Digital systems has an attractive appearance and differs in accuracy of adjustment, however, it is extremely sensitive to voltage fluctuations.

The mechanical unit looks “simpler”, and the adjustment accuracy is not the same, however, the reliability of such devices fully compensates for these shortcomings. In addition, the price of models with electronic adjustment is much higher.

The casing of the unit can be made of both metal and polymeric materials. The most common is the cylindrical shape, but models of other configurations are in demand.

How to choose the volume of the water heater

Boiler capacity is one of the main criteria to consider. Customer feedback and statistical analysis made it possible to determine the required amount of hot water depending on the number of consumers.

For one person, a 30-liter Ariston heater is enough. If two people live in one apartment at the same time, Ariston for 50 liters will fully satisfy the need for hot water. A family of three or four people will need "Ariston" for 80 liters. If we are talking about providing a private cottage or a small restaurant, the best option would be "Ariston" for 100 liters or more.

Operating instructions for the water heater "Ariston"

The beginning of operation can be considered the installation and connection of the boiler to a centralized cold water supply system and electrical network. The quality of installation depends on the safety, efficiency and service life of the product. If, for one reason or another, the boiler is put into operation on its own, special attention should be paid to the points below.

It is necessary to start work on mounting and connecting an Ariston brand water heater by carefully studying the instructions attached to it.

1. Since the power consumed by the device is quite large, it is necessary to make sure that the characteristics of the electrical wiring used for connection fully correspond to the expected loads and has. The best option for connecting to the mains is a separate cable from the switch cabinet or shield.
2. Do not use components with visual defects, damaged threaded sections, etc. The safety valve included in the scope of delivery deserves special attention.
3. Since the mass of the product is quite large, and the temperature of the water contained in it can reach up to +75 0 С, the boiler must be fixed to the bearing surface on metal ones with a diameter of at least 10 mm. It is allowed to use plastic dowels of the same load capacity.
4. Installation of supply and discharge pipelines must be carried out in strict accordance with the diagram attached to the heater by the manufacturer.
5. The place of connection to the power supply must be reliably protected from condensate, dampness and direct contact with water.
6. You can connect Ariston to the power supply only after filling the storage tank with cold water, otherwise the water heater heater may fail.
7. If all the work is done correctly and the product is working properly, after switching on, the corresponding indicator should light up, indicating that the boiler is working.

Water heater Ariston: operation, maintenance and repair

To ensure efficient and safe operation, you must know and follow the basic rules for using the product.

1. It is forbidden to turn on the device until the storage tank is completely filled.
2. Mechanical or other damage to electrical cables is not allowed;
3. Before starting the operation of the Ariston water heater, make sure that the grounding is in good condition;
4. In the event of a malfunction, the unit should be immediately disconnected from the power supply, drain the water and contact the Ariston service center.

Even with proper operation, timely maintenance of the system is necessary to maintain operability. First of all, this is due to the low quality of the water supplied. Despite the presence of filters, a large number of chemical compounds and mechanical impurities that contribute to the formation of scale and other contaminants. Regular and internal surface of the drive will significantly increase the life of the boiler. Scheduled maintenance includes:

Preliminary draining of water from the storage tank;

Disconnection of plumbing fittings;

Dismantling the body of the water heater;

Cleaning the heating element and the inner surface of the tank without the use of particularly aggressive detergents, if possible avoiding mechanical and abrasive effects;

Assessing the condition of the magnesium anode and, if necessary, replacing it.

The conservation and subsequent activation of the boiler deserves special consideration.

How to turn on the Ariston water heater after winter: instruction manual

If the use of the device in the cold season is not planned, measures should be taken to preserve the system, and, above all, the water heater itself. For this you need:

1. Completely drain the water from the storage tank;
2. Disconnect the plumbing fittings from the inlet and outlet pipes;
3. Clean the heating element and the inner surface of the tank;
4. Copiously lubricate the threaded surface of the nozzles with grease or other grease and wrap with rags or PVC film.

To turn on the Ariston heater after winter, you must:

1. Clean the pipes from grease residues;
2. Connect the device to the main pipelines;
3. Make sure that the grounding and electrical wiring are in good condition;
4. Fill the storage tank with cold water;
5. Turn on power.

Important! Connecting an empty storage heater to the mains is strictly prohibited!

Due to the simplicity of design, reliability and affordable price Ariston 30, 50, 80 and 100 liters are well-deservedly popular. A wide range of models allows you to choose a model according to your needs and financial capabilities. However, we should not forget that only full compliance with the operating instructions and timely maintenance will ensure efficient operation and prevent premature failure of the Ariston boiler.

Comfortable life modern man cannot be imagined without hot water. And public utilities are not very worried about its filing, especially in summer time. Therefore, everyone strives to independently take care of the well-being in their home. Nowadays, many people have begun to use water heaters. They are economical and practical. Ariston brand water heaters are considered the most popular today.

Peculiarities

The main feature of water heaters is a tank built inside, in which water keeps the temperature set by the program for quite a long time. This type of heater is suitable for people who often have problems with hot water. The most common is a water heater with a volume of eighty liters. It works on one heating element and has a power of 1.5 kW. Accordingly, he can heat water to a maximum temperature of seventy-five degrees in three hours. Such a heater will be enough for a family of three. The Ariston model, which has a capacity of 120 liters, has a power of 1.8 kW. As you can understand, the entire line is very economical, but at the same time not very fast.

But the regulator knob, located at the very bottom of the tank, is also not very conveniently placed. And even if the design has only five heating modes, you need to look down constantly in order to control the process of heating and cooling water.

Of course, outwardly such a water heater only benefits from this, but ease of use is much more important. By the way, it is worth noting that turning the boiler on and off is also done using the rotary knob. This approach to design leads to the fact that only a light indicator and a thermometer are visible to everyone. But, despite minor flaws, all Ariston equipment has many advantages. Water heaters are no exception to the rule.

• Stylish design will complement any interior space.
• Each model is created using new technologies.
• Water heaters of this company have a long service life. This is achieved due to the fact that the inner sides of the storage tank are covered with a layer of modern material that protects it from the appearance of rye and plaque.

• Complemented with dividers that prevent mixing of cold and heated water.
• The Ariston water heater, thanks to built-in temperature control sensors, has protection against overheating. Guarantee safe use is a protective device that can operate in case of any voltage fluctuations. Even if there is no water in the system itself, then you should not worry that it will turn on by itself, because it has special protection.
• The heaters of this company help to save gas and electricity consumption. This is facilitated by thermal insulation, which keeps water hot for a long time.
• Many of the models are equipped with protection against the appearance of any bacteria. Thus, the water is already purified.

But when creating water heaters, it is impossible to do without drawbacks. There are not many of them, and the main problem is that some structural details fail from time to time. Very often the magnesium anode breaks, and then the water heater needs to be handed over for repair. And the safety valve may also fail. All this is quite expensive.

Kinds

Ariston products can be divided into the following types:

• floor boiler;
• condensing boiler;
• boiler with indirect heating;
• instantaneous gas-fired water heater;
• gas storage water heater;
• electric heater with a storage function.
• a heater having a heat pump.

Each of the devices is equipped with heating elements, various accessories, and control devices. Each model of a water heater has technical characteristics.

ABS VIS EVO PW D

This water heater is electrically heated. It has a tubular heater element, pressurized tank type, electronic control, vertical and horizontal installation, and wall mounting method.

Ariston Regent 80

ABS PRO ECO INOX PW 80 V

If we decipher the abbreviation, then ABS means that this is a device that turns off the storage water heater in cases where there are power surges. PRO means that the water heater has a cylindrical body intended for vertical installation.

ECO is a label that notifies that the inner walls of the tank have antibacterial protection, as well as the function of water purification from various chemical impurities.

INOX means that stainless steel is used for the inner lining of the flask, this will give a guarantee of up to seven years. PW means that the water heater has an economical electric unit of one and a half kilowatts, and is also supplemented with another heating element for one kilowatt. This, of course, puts a large load on the power grid, but at the same time, 80 liters of water heats up much faster.

Water heater Ariston VELIS INOX

The design of this model consists of stainless steel elements. The power cord is equipped with a protection system. But also this model has a fuse that prevents the heater from starting when the container is empty. This is already a fairly reliable protection against common breakdowns. The shape of the water heater is flat. The heating element is made of copper itself High Quality. The power of such a model reaches 2.5 kilowatts, so the wiring must match.

Water heater Ariston ABC VELIS PW

This model has a disconnecting storage device, which allows you to leave the water heater unattended. And there is also an additional feature that provides antibacterial protection. Outside, the tank is protected by a layer of stainless steel.

Ariston PRO ECO INOX PW V SLIM

Such a water heater has a power of up to one and a half kilowatts. The body is covered with stainless steel. The diameter of this model is only 35.3 centimeters, and the inside of the tank is covered with an antibacterial protective layer. This water heater will not take up much space and save energy.

Ariston ABS PRO ECO INOX PW

This model has a rather narrow cylindrical shape, so the water heater can be easily installed anywhere. It is controlled electronically. On the one hand, this is very good, but on the other hand, if the system fails, you will have to reconfigure everything in a new way.

All its parts, both internal and external, are coated with stainless steel. Thanks to many positive qualities, it serves for a long time, with a warranty period of up to seven years.

Ariston ABS PRO R INOX

The water heater consists of a mechanical thermostat, in addition, it has a magnesium anode that protects it from various bacteria. The heating control is located outside, not inside. Pleasantly pleased that this is the most economical model.

Ariston ABS PRO ECO PW SLIM

This model has a very narrow shape of the water heater itself. Such a simple and concise design is complemented by all the necessary protective systems. It is also economical in terms of energy consumption.

Ariston ABS PRO ECO PW

This type of heater is perfect for both kitchen and bathroom. It has all the protection systems, its design includes an additional heating element, which allows you to quickly cope with water heating.

Ariston ABS PRO R SLIM

A rather convenient cylindrical shape allows you to install a water heater in any corner of the room. He is the most budget option and has a diameter of up to 350 millimeters. Heats up quickly, has all kinds of protection, it includes a safety valve.

Of all the proposed models from a well-known brand, you can safely buy almost any. All of them please with their quality, and serve for a very long time.

Wiring diagram

Any water heater that seems, at first glance, simple, has a simple and internal structure. Its dimensions can be both cylindrical and flat. Any water heater consists of:

• boiler, that is, an internal tank;
• the body with which the boiler is framed;
• A heating element that heats the water that entered the tank, there may even be two of them, which contributes to the rapid heating of the water;
• a layer of thermal insulation located between the body and the boiler, allowing the water to remain warm for a long time;
• branch pipe with a divider;
• magnesium anode, which prevents the deposition of mineral salts on the walls inside the tank;
• voltage indicator;
• thermostat;
• thermometer.

Terms of Use

To properly install the water heater, you must strictly follow the instructions. Reading it will help not only to study all its subtleties, but also to extend its working condition.

• Before starting work, you should first choose a place where the water heater will be installed. It should be located near the bath or shower so that the heat loss is not large.
• Next, you will need to make sure that the tank is filled with water when it turns on and off. The first inclusion must necessarily occur with a full tank.
• When the heater is already connected to the network, the temperature readings should be displayed on its control panel. The instructions say that if the numbers are flashing, this means that the water heater is still in the off state. To turn it on, you must press the on / off button, which is located in the upper left corner.
• On the control panel there is a button that sets the power. It regulates the voltage strength from 1500 to 2500 watts.

• The temperature can be adjusted using the button on which plus and minus are written.
• After setting the program, the water heater remembers it and works in the already set mode. If the boiler was turned off, the settings are automatically reset.
• If any batteries are damaged, they must be replaced. You need to buy them from the same manufacturer as the water heater.
• When planning not to use the heater for a long time, especially in winter, it must be prepared for “stagnation”. To do this, drain the water, leaving it empty.
• From time to time it is necessary to clean the inside of the water heater from dirt. To do this correctly, you need to have certain skills. Therefore, it is worth contacting specialists.

• Connection work should also be entrusted to specialists. First you need to carefully inspect the safety valve. It must not have any flaws. If they are, it is necessary to replace the part that is damaged.
• It is also worth checking if the grounding works.
• At the end of the instructions, it talks about a very good feature that protects the water heater from bacteria. Since the hot environment is a great place for them to breed. When turned on, the heater will raise the temperature by more than 65 degrees, which will not allow bacteria to exist. This function must be enabled once a month, this will already be enough.

Possible malfunctions

When buying an Ariston water heater, you need to know which places are the most vulnerable. The first is a thermostat, sensor devices, heating elements, switches. But it is also very common to repair insulating gaskets and valves.

Careless handling of the water heater may damage the integrity of the tank. And it is repaired only in the service. To determine the malfunctions in the water heater, you need to understand if there are changes in its operation. It can be a strong hiss during operation. And also often the period of heating water is significantly increased. A sign of a breakdown may also be the fact that the device turns on and off more often or the lights flash frequently.

To prevent this from happening, you need to clean the heater from plaque every six months as a preventive measure, otherwise it will turn into a pebble.

In order not to contact the service center in case of a small breakdown, you can do the repair yourself. This is not so difficult to do. First you need to de-energize both the device and the entire room. Then you need to drain the water. This is done using a hose that has a diameter slightly smaller than the hole designed to drain the liquid. The drain hose should be placed directly into the toilet. Next, the cold water supply is turned off. Then you need to disconnect the hose from the cold water valve.

This hose must be connected to a faucet and also lowered into the toilet. Next, disassemble the water heater and remove the heating element, the fastening of which is on a nut with a plate or washer. Having pulled out the heater, you need to very carefully examine those places where there is scale. Where it is available, it is necessary to clean it, but very carefully so as not to harm the tank. After the scale is removed, the tank must be poured clean water. If the heating element is in working condition, it can be cleaned in the same way. After that, in reverse order, all hoses and spare parts of the water heater must be reinstalled.

by the most budget funds for descaling is considered lemon acid to be diluted in water. It must be poured into the tank and left there for a day. Parts must only be replaced with original parts. This guarantees stable work water heater.

To decide on the choice of an Ariston water heater, you need to know what the “ideal” boiler should be, and look for exactly these functions and characteristics in the descriptions.

• The water heater must have a magnesium anode, which will protect it from scale and prevent corrosion.
• Equipment that has a vertical design is much cheaper than a horizontal version, which is important for those who have savings in the first place.
• Those water heaters that are made of stainless steel or titanium will last the longest. However, their price is also higher.
• It is necessary that there be a bypass valve, which is necessary to relieve excess pressure that occurs as a result of the difference in the thermal expansion coefficients of metal and water.

The Ariston water heater with a volume of 80 liters will allow you to comfortably equip a country house or apartment. It is easy to use and gets mostly good feedback from buyers. In addition, you can connect it yourself if you carefully read the instructions. But, when installing the heater with your own hands, you need to remember that the further operation of the device largely depends on the correct installation. Therefore, it is better not to save on installation, and invite specialists. This will help extend the life of the heater, as well as save the owner's nerves.